Using larger than 120GB drives on a Blade 1500 Post: 302823057

10 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

Configuring networking interface on Sun Blade 1500

Hi, I am attempting to configure my ethernet interface on a Sun Blade 1500. I am testing out my network interface my connecting a crossover cable from my blade to a windows box. I would like to assign an ip address of 10.0.0.2 to "bge0" and netmask of "255.0.0.0". I have typed the following: ...

2. Shell Programming and Scripting

how floppy disks, CDs and flash drives (pen drives) are accessed in UNIX

hi how floppy disks, CDs and flash drives (pen drives) are accessed in UNIX? thanks

3. Solaris

Sun Blade 150 - I can't hook up extra drives

I'm not familiar with this particular machine and it's baffling me. For those that are familar with the workstation, allow me to paint a picture. If you were looking down on the machine (open) you would see the main board and then a riser board. On the left side of the riser board are jacks...

4. Solaris

Sun blade 1500 installation and administration problem

Hi I'm completely new in solaris,and don't know many about it. I was installed solaris 10 on sun blade 1500,and also I need to install oracle on it. Now I stuck on some thing and i'm sure that you help me. When i started Oracle installation system told me that I don't have enogh swap space....

5. Solaris

Compile PHP 5.3.6 with MySql on Sun Blade 1500 Solaris 10

Hello, I'm trying to compile PHP 5.3.6 with Apache2 and MySql 5.5.12. I hit a problem that I can't seem to resolve by myself and I could not find a solution on the web. It looks like Apache and MySql installed ok, I can start/stop them with no problem. When I try to compile PHP the...

6. AIX

cp 1500+ Files

Hello, I need to copy 1500+ files (total of 170mb) from our /tmp/directory to a different directory /application/program/files I issue the command: user@host> cp * /application/program/files I am getting the follwing error: ksh: /usr/bin/cp: arg list too long being new to aix, I...

7. Solaris

help installing solaris 10 on sun blade 1500

Hi everyone can someone please explain to me how to install solaris 10 on a sunblade 1500 using cdrom? Thanks for your assistance

8. Solaris

Sun blade 1500 bad magic number

Good afternoon all, First, sorry for my English, this is not my first language but I try my best :). So, here we go. A friend of mine gave me an old Sun Blade 1500 he wasn't using. He said it was working fine except for the missing hard drive. I had in my IT personnal box an old IDE...

9. UNIX Benchmarks

Blade 1500 Silver

CPU/Speed: UltraSPARC-IIIi/1.5Ghz Ram: 1GB Motherboard: Sparc Bus: PCI Cache: Controller: Disk: ATA Load: 1 user Kernel: SunOS 5.10 Generic_137111-02 Kernel ELF?: yes pgms: gcc 2.95.3 compiled BYTE UNIX Benchmarks (Version 3.11) System -- SunOS aachen95 5.10...

10. Red Hat

How to know full width blade or half width blade?

HI, How do we figure out if the server is half blade server or full blade server? Anything we need to look at to know on this? thanks in advance

LEARN ABOUT REDHAT

allneeded

allcm(1)							       teTeX								  allcm(1)

NAME

       allneeded - force the calculation of all fonts now needed

SYNOPSIS

       allneeded [-r] files ...

DESCRIPTION

       allneeded  forces  the calculation of all fonts that are needed to preview a set of dvi files. Just specify where the program should search
       for files on the commandline.  The fonts generation is triggered by running dvips(1) over all accessible dvi-files.  Therefore,	the  fonts
       are created in the resolution needed by dvips.

       If the -r flag is specified, the command dvired(1) will be used instead of dvips.

       allneeded does not recalculate existing fonts (as long as the Metafont mode does not change).

SEE ALSO

       alldc(1), allcm(1), dvips(1), dvired(1), fontimport(1), fontexport(1).

AUTHOR

       Dirk Hillbrecht (dh@informatik.uni-hannover.de)

teTeX								       11/94								  allcm(1)

10 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

Configuring networking interface on Sun Blade 1500

Discussion started by: annointed3

2. Shell Programming and Scripting

how floppy disks, CDs and flash drives (pen drives) are accessed in UNIX

Discussion started by: nokia1100

3. Solaris

Sun Blade 150 - I can't hook up extra drives

Discussion started by: silversaleen68

4. Solaris

Sun blade 1500 installation and administration problem

Discussion started by: dirtyjack