The following was obtained by the "save" command in "format" on a Blade 1500.
If you append it to /etc/format.dat then "format" should offer the "DEFAULT" in the "type" command. Then you can write the Sun disk label with the "label" command.
The OS then will see a 127.5 GB disk.
This User Gave Thanks to MadeInGermany For This Post:
Hi,
I am attempting to configure my ethernet interface on a Sun Blade 1500. I am testing out my network interface my connecting a crossover cable from my blade to a windows box. I would like to assign an ip address of 10.0.0.2 to "bge0" and netmask of "255.0.0.0". I have typed the following:
... (1 Reply)
I'm not familiar with this particular machine and it's baffling me. For those that are familar with the workstation, allow me to paint a picture. If you were looking down on the machine (open) you would see the main board and then a riser board. On the left side of the riser board are jacks... (1 Reply)
Hi
I'm completely new in solaris,and don't know many about it.
I was installed solaris 10 on sun blade 1500,and also I need to install oracle on it.
Now I stuck on some thing and i'm sure that you help me.
When i started Oracle installation system told me that I don't have enogh swap space.... (1 Reply)
Hello,
I'm trying to compile PHP 5.3.6 with Apache2 and MySql 5.5.12. I hit a problem that I can't seem to resolve by myself and I could not find a solution on the web.
It looks like Apache and MySql installed ok, I can start/stop them with no problem.
When I try to compile PHP the... (4 Replies)
Hello,
I need to copy 1500+ files (total of 170mb) from our /tmp/directory to a different directory /application/program/files
I issue the command:
user@host> cp * /application/program/files
I am getting the follwing error:
ksh: /usr/bin/cp: arg list too long
being new to aix, I... (6 Replies)
Good afternoon all,
First, sorry for my English, this is not my first language but I try my best :).
So, here we go.
A friend of mine gave me an old Sun Blade 1500 he wasn't using. He said it was working fine except for the missing hard drive.
I had in my IT personnal box an old IDE... (33 Replies)
HI,
How do we figure out if the server is half blade server or full blade server?
Anything we need to look at to know on this?
thanks in advance (9 Replies)
Discussion started by: snchaudhari2
9 Replies
LEARN ABOUT SUSE
hpionibmblade
hpionIBMblade(1) OpenHPI hpionIBMblade(1)NAME
hpionIBMblade - An openhpi sample application that shows how two (2) openhpi plugins can be used to display and manage resources of an IBM
Blade with Basedboard Management Controller (BMC).
SYNOPSIS
hpionIBMblade [ -x ]
DESCRIPTION
hpionIBMblade shows how two (2) openhpi plugins can be used to display
and manage resources of an IBM Blade with Basedboard Management Controller (BMC).
Both the ipmi and snmp_bc plugin have the same IBM Blade target. Resources from
both plugins are combined to show a complete view of the IBM Blade.
@@ WARNING @@ RESTRICTIONS @@ WARNING @@ RESTRICTIONS @@ WARNING @@ RESTRICTIONS @@
This client application is designed to run **only** inband on an IBM Blade with Basedboard
Management Controller (BMC)
OPTIONS -x Display debug messages.
SAMPLE CONFIGURATION FILE
handler libipmi {
entity_root = "{SYSTEM_CHASSIS,2}"
name = "smi"
addr = 0
}
handler libsnmp_bc {
host = "bc.mm.ip.address"
version = "3"
community = "bc_community"
entity_root = "{SYSTEM_CHASSIS,1}"
security_name = "myid"
passphrase = "mypassword"
security_level = "authNoPriv"
auth_type = "MD5"
}
SEE ALSO AUTHORS
Authors of this man page:
Peter D Phan (pdphan@users.sourceforge.net)
2.14.1 2009-11-23 hpionIBMblade(1)