Sponsored Content
Operating Systems AIX CD-ROM issue with PowerVM IVM VIOS Post 302750623 by filosophizer on Wednesday 2nd of January 2013 04:08:25 AM
Old 01-02-2013
Solution | Resolved LPAR VIOS IVM POWERVM AIX CD-ROM

When I restarted the LPAR after assigning it, from SMS menu I was able to detect it.


Apparently as Michael Felt said, the issue is with the AIX 5.3 ML 00 !!

With AIX 6.1 , I can assign the CD - ROM through web and it will be detected after executing cfgmgr !
 

10 More Discussions You Might Find Interesting

1. AIX

PowerVM Express and IVM limitations

When using PowerVM Express and IVM (no HMC) on a Power6 P520 , can I configure 2 LPARs in addition to a VIO server, or does the VIO Server count as one of the two LPAR's that PowerVM Express allows? (1 Reply)
Discussion started by: JodyTek
1 Replies

2. HP-UX

External DVD-ROM drive issue whether it is working or not? on HP rp7400

Please help me > How to diag the external DVD-ROM drive issue whether it is working or not? on HP 9000 server rp7400 I needed to install HP 11i v1 using external DVD-ROM drive on HP 9000 server rp7400. While boot in CO> “search” command is not showing DVD-ROM device only showing all disks >... (0 Replies)
Discussion started by: tpuser
0 Replies

3. UNIX for Advanced & Expert Users

external DVD-ROM drive issue whether it is working or not?on HP rp74000

old clunker - rp74000 How to diag the external DVD-ROM drives issue whether it is working or not? on HP 9000 server rp7400 Please help me > I needed to install HP 11i v1 using external DVD-ROM drive on HP 9000 server rp7400. While boot in CO> “search” command is not showing DVD-ROM device... (1 Reply)
Discussion started by: tpuser
1 Replies

4. AIX

VIOS IVM unavailable - how do I restart it?

Hi everyone, Sorry if this post is in the wrong place. I searched the forums for "IVM" and it turned up no results. Hopefully someone knows about this. My dilemma is that I have multiple IBM JS12 Express blades in our blade center, each running VIOS 2.1.0.10-FP-20.1 and hosting a couple LPARs. Out... (2 Replies)
Discussion started by: need2bageek
2 Replies

5. AIX

VIOS IP address - separate vlan for vios servers ?

Hello, Lets say for simplicity that I do not use any vlan config inside my server - one lpar group use hea physical port1, another group hea physical port2. Physical port1 configured as vlan1 on external switch, physical port2 as vlan2. What is the common practice - should I isolate my vios... (0 Replies)
Discussion started by: vilius
0 Replies

6. AIX

IBM VIOS POWERVM IVM error

Hi, When I try to login on my vios ivm website http://vios through the browser -- all three of them -- firefox , chrome , Internet Explorer , i get this error http://vioserver/j_security_check I have java installed on the machine from where i am trying to open up the IVM/VIOS webpage. I... (2 Replies)
Discussion started by: filosophizer
2 Replies

7. AIX

IBM Power Pseries Open Firmware boot / VIOS POWERVM VET CODE

Hello, I installed PowerVM IVM Virtual I/O on P-550 but later found out that the machine isn't activated for CoD VET code for virtualization. So when booted , it goes into OPEN Firmware I/O Hosting requires a hosting partition boot not permitted exit called > ok Panel shows > IO... (3 Replies)
Discussion started by: filosophizer
3 Replies

8. AIX

AIX VIOS IVM Ethernet problem

Hi All, I have a p520 box running 3 LPARs, 1 x VIOS, 1 x AIX 6.1 and 1 x AIX 7.1 and no HMC, all configuration is performed via VIOS/IVM Until recently the box did not have the AIX7.1 LPAR and everything was fine with the box. We needed to use AIX 7.1 for a new project, so I created a... (11 Replies)
Discussion started by: KevB
11 Replies

9. AIX

Revisiting IBM PowerVM VIOS AIX

coming from this thread: https://www.unix.com/aix/211107-ibm-power-pseries-open-firmware-boot-vios-powervm-vet-code.html PowerVM, formerly known as Advanced Power Virtualization (APV), is a chargeable feature of IBM POWER5, POWER6, POWER7, POWER8, and POWER9 servers and is required for support... (0 Replies)
Discussion started by: filosophizer
0 Replies

10. AIX

Powervm ivm vios

Hello, After installing on P6 which is POWERVM IVM VIOS enabled (VET CODE D21C77ACD9229817CA1F00002C10004164 ) i get this message "I/O hosting requires a hosting partition - boot not permitted". HMC was connected to the machine then HMC was removed through ASMI Searching on... (2 Replies)
Discussion started by: filosophizer
2 Replies
NETROM(4)						     Linux Programmer's Manual							 NETROM(4)

NAME
AF_NETROM - NET/ROM amateur packet radio protocol family DESCRIPTION
NET/ROM is a protocol used extensively by radio amateurs. The Linux NET/ROM protocol family permits access to these protocols via the stan- dard networking socket metaphor. The NET/ROM protocol layer only supports connected mode. IP traffic may be stacked on top of NET/ROM frames using a non-standard extension to the NET/ROM protocol. The only mode of operation is connected mode which is the mode used for a socket of type SOCK_SEQPACKET (stream sockets are not available in NET/ROM). This requires that the user ensures output data is suitably packetised, and that input data is read a packet at a time into a buffer of suitable size. NET/ROM addresses consist of 6 ascii characters and a number called the SSID. These are encoded into a sockaddr_ax25 structure which is provided to the relevant system calls. NET/ROM has some unusual properties. Notably in a multi-user system an AX.25 address is often associated with a user, and some users may not have such an association. a set of ioctl calls are provided to manage an association table. NET/ROM supports the following socket options for SOL_NETROM. NETROM_T1 is the T1 timer in 1/10ths of a second, NETROM_T2 is the T2 timer in 1/10ths of a second. NETROM_N2, the retry counter is also configurable. There is no 'infinite retry' option supported however. It is possible for an application to request that the NET/ROM layer return the NET/ROM header as well as the application data, this is done via the NETROM_HDRINCL socket option. SEE ALSO
call(1), socket(2), setsockopt(2), getsockopt(2), nrbroadcast(5), nrports(5), netromd(8), noderest(8), nodesave(8), nrparms(8). AUTHOR
Jonathan Naylor G4KLX <g4klx@g4klx.demon.co.uk> Linux 25 July 1996 NETROM(4)
All times are GMT -4. The time now is 12:59 PM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy