Solaris 10 Speed and Duplex Settings: bge Post: 302349316

Sponsored Content

Operating Systems Solaris Solaris 10 Speed and Duplex Settings: bge Post 302349316 by brialt1 on Monday 31st of August 2009 04:12:45 PM

08-31-2009

Registered User

What I posted before are my changes, the original file includes only commented out material and the following:

Code:

#########################################################################
#
# The property below represents the list of subsystem vendor/device pairs
# with which driver operation is supported.  This list will be updated and
# extended as new subsystems are validated ...
#
bge-known-subsystems    = 0x108e1647,
                          0x108e1648,
                          0x108e16a7,
                          0x108e16a8,
                          0x17c20010,
                          0x17341013,
                          0x101402a6,
                          0x10f12885,
                          0x17c20020,
                          0x10b71006,
                          0x10280109,
                          0x1028865d,
                          0x0e11005a,
                          0x103c12bc;
#########################################################################

brialt1

View Public Profile for brialt1

Find all posts by brialt1

10 More Discussions You Might Find Interesting

1. Solaris

Duplex Settings

Hi All I've been having a lot of errors logged on the Cisco Catalyst (4000 series) which one of my Solaris servers is patched into. I have a feeling they are duplex related, but I'm a bit stuck as to how to confirm that. How do I: 1. Check the duplex settings on my eri0 card? 2. Set the...

2. IP Networking

NIC speed 100M/full duplex problem

I have a TOSHIBA AS7000 B150 Sun Box I wanted to run it with 100M/full duplex I had added this to the /etc/system file to make to setting permenant So it would be set correctly on reboot. set eri:eri_adv_100fdx_cap=1 set eri:eri_adv_100hdx_cap=0 set eri:eri_adv_autoneg_cap=0 But when I...

3. HP-UX

command to change duplex settings..

Hi Folks, I want the command to change the duplex settings of a HP-UX server. Thanks in advance. Sagar.

4. Solaris

gigabit - fix speed/duplex on the switch ? or autoneg ?

Hi there We have a bit of a debate going here over what the prefered method is for setting 1000/Full on e1000g or nge interfaces is. As you aware the Solaris configration files for nge and e1000g dont allow you to "fix" 1000/Full but instead allow you to set auto-negotiate to ON but only...

5. UNIX for Advanced & Expert Users

How to set full duplex for solaris 5.5

I would like to change half duplex to full duplex on solaris 5.5. I tried with below commands but they didnt work on solaris 5.5. #ndd -set /dev/le adv_100fdx_cap 1

6. Infrastructure Monitoring

How to find the duplex speed on Windows

Hi, In UNIX, it's very easy to find the duplex speed. But in Windows, is there a easy way to find the duplex speed? I can't go to over 100 servers to find this out, I was wondering if I run one command to do this? Please advice.

7. Solaris

How to find half duplex or full duplex

Hi, How to find whether the server is running with half duplex or full duplex. I tried with the following command ndd -get /dev/ but am not getting any output,. Is the command correct? Also let me know how to change from half to full duplex.

8. AIX

How to change Speed Duplex

How to change Speed Duplex ! How to change Speed Duplex by command chdev -P -l ent1 -a media_speed=1000_Full_Duplex How to change Speed Duplex by Smitty . smitty chgenet -> select adapter -> change Media speed etc. -> set "Apply change to DATABASE only" to yes -> Enter -> ...

9. AIX

Connected and Running with half duplex speed

VIO Server connected to switch port and running with half duplex speed on one of the shared ethernet adapter. We have verified at switch end and everythings looks good. Other ethernet adapter in the VIO server are connected and running in Full duplex speed. Please help me find why this shared...

10. Shell Programming and Scripting

Need script help for monitoring duplex settings

So I have a server I am trying to set up a script to send a Wall message notifying of my eth0 nic being set to 100 half duplex instead of 100 full duplex. I know I am trying to read from /etc/sysconfig/network/ifcfg-eth0 to pull the parameters STARTMODE=onboot BOOTPROTO=static...

LEARN ABOUT OPENSOLARIS

scconf_transp_adap_bge

scconf_transp_adap_bge(1M)				  System Administration Commands				scconf_transp_adap_bge(1M)

NAME

       scconf_transp_adap_bge - configure the bge transport adapter

DESCRIPTION

       Note -

	 Beginning  with  the Sun Cluster 3.2 release, Sun Cluster software includes an object-oriented command set. Although Sun Cluster software
	 still supports the original command set, Sun Cluster procedural documentation uses only the object-oriented command set. For more  infor-
	 mation about the object-oriented command set, see the Intro(1CL) man page.

       You can configure bge adapters as cluster transport adapters. These adapters can only be used with the dlpi transport type. The bge adapter
       is VLAN capable.

       The bge adapter connects to a transport switch or to another bge adapter on a different node.  In  either  case,  the  connection  is  made
       through a transport cable.

       When a transport switch is used and the endpoints of the transport cable are configured by using the scconf command, the scinstall command,
       or other tools, you are asked to specify a port name on the transport switch. You can provide any port name, or accept the default, as long
       as the name is unique for the switch.

       The default is to set the port name to the node ID hosting the adapter at the other end of the cable.

       There are no user configurable properties for cluster transport adapters of this type.

SEE ALSO

	Intro(1CL), clinterconnect(1CL), clnode(1CL), scconf(1M), scinstall(1M), bge(7D)

Sun Cluster 3.2 						    4 May 2006						scconf_transp_adap_bge(1M)

10 More Discussions You Might Find Interesting

1. Solaris

Duplex Settings

Discussion started by: saabir

2. IP Networking

NIC speed 100M/full duplex problem

Discussion started by: AirWalker83

3. HP-UX

command to change duplex settings..

Discussion started by: sag71155

4. Solaris

gigabit - fix speed/duplex on the switch ? or autoneg ?

Discussion started by: hcclnoodles