Hi All
I've been having a lot of errors logged on the Cisco Catalyst (4000 series) which one of my Solaris servers is patched into. I have a feeling they are duplex related, but I'm a bit stuck as to how to confirm that.
How do I:
1. Check the duplex settings on my eri0 card?
2. Set the... (3 Replies)
I have a TOSHIBA AS7000 B150 Sun Box
I wanted to run it with 100M/full duplex
I had added this to the /etc/system file to make to setting permenant So it would be set correctly on reboot.
set eri:eri_adv_100fdx_cap=1
set eri:eri_adv_100hdx_cap=0
set eri:eri_adv_autoneg_cap=0
But when I... (4 Replies)
Hi there
We have a bit of a debate going here over what the prefered method is for setting 1000/Full on e1000g or nge interfaces is.
As you aware the Solaris configration files for nge and e1000g dont allow you to "fix" 1000/Full but instead allow you to set auto-negotiate to ON but only... (1 Reply)
I would like to change half duplex to full duplex on solaris 5.5. I tried with below commands but they didnt work on solaris 5.5.
#ndd -set /dev/le adv_100fdx_cap 1 (6 Replies)
Hi,
In UNIX, it's very easy to find the duplex speed. But in Windows, is there a easy way to find the duplex speed? I can't go to over 100 servers to find this out, I was wondering if I run one command to do this?
Please advice. (2 Replies)
Hi,
How to find whether the server is running with half duplex or full duplex. I tried with the following command ndd -get /dev/ but am not getting any output,. Is the command correct?
Also let me know how to change from half to full duplex. (1 Reply)
How to change Speed Duplex !
How to change Speed Duplex by command
chdev -P -l ent1 -a media_speed=1000_Full_Duplex
How to change Speed Duplex by Smitty .
smitty chgenet -> select adapter -> change Media speed etc. -> set "Apply change to DATABASE only" to yes -> Enter -> ... (0 Replies)
VIO Server connected to switch port and running with half duplex speed on one of the shared ethernet adapter. We have verified at switch end and everythings looks good.
Other ethernet adapter in the VIO server are connected and running in Full duplex speed.
Please help me find why this shared... (4 Replies)
So I have a server I am trying to set up a script to send a Wall message notifying of my eth0 nic being set to 100 half duplex instead of 100 full duplex.
I know I am trying to read from /etc/sysconfig/network/ifcfg-eth0 to pull the parameters
STARTMODE=onboot
BOOTPROTO=static... (6 Replies)
Discussion started by: lutador72
6 Replies
LEARN ABOUT NETBSD
xpci
XPCI(4) BSD/xen Kernel Interfaces Manual XPCI(4)NAME
xpci -- Xen frontend paravirtualized PCI pass-through driver
SYNOPSIS
xpci* at xenbus?
pci* at xpci?
DESCRIPTION
The xpci driver is the frontend part of the PCI pass-through functionality that can be used by Xen guest domains to communicate with PCI
devices.
From a guest point of view, xpci is similar to a pci(4) bus, except that the guest talks with the PCI backend driver instead of the real
physical device directly.
When the host domain is NetBSD, the xpci driver is backed by a pciback(4) driver within the dom0.
SEE ALSO pci(4), pciback(4), xenbus(4)HISTORY
The xpci driver first appeared in NetBSD 5.1.
AUTHORS
The xpci driver was written by Manuel Bouyer <bouyer@NetBSD.org>.
SECURITY CONSIDERATIONS
As PCI passthrough offers the possibility for guest domains to send arbitrary PCI commands to a physical device, this has direct impact on
the overall stability and security of the system. For example, in case of erroneous or malicious commands, the device could overwrite physi-
cal memory portions, via DMA.
BSD January 8, 2011 BSD