Hopefully this is the correct place to post this, if not please let me know.
I am trying to find a way to print from AIX directly to a windows PDF printer. I don't really care if it is paid or freeware, I am just trying to get it to work. I did see a product called BullZip and I am going to... (3 Replies)
Guys, I have a issue that I am trying to rectify please advise.
lpstat -t shows
scheduler is running
printer lext644 disabled since Mon Dec 02 19:48:18 2013. available.I have restarted the printer service and it shows online but the above says disabled. I have a lot of jobs in the print... (1 Reply)
Sorry, I meant to type "porting C codes from Solaris 10, x86 to cygwin in Windows"
I just installed cygwin 1.7 to my Windows PC.
I have a C program that compiles fine using gcc on Solaris 10, x86. This C program contains system calls like:
system ("ls -l > file.txt");
and
system... (3 Replies)
i have application of gestion instaleled in sco openserver but i want to config my printing in my windows xp
name of my print is epson lq 2080
and it's instaled in windows xp
thank all ;);):):b::b::b:
i accede to my server sco open whith logiciel putty (2 Replies)
I have successfully gotten AIX to print to a windows shared printer with this command:
smbclient -U user%password -W domain -c "print file.ext"
the only problem is: I have this print queue set up on the Windows side to overlay an image to all pages. When printing from samba, the overlay... (2 Replies)
Hello
I've been google'ing to try to find an answer to my question but can't seem to find it.
What I want to do is to pass the email address of a user printing from the HP-UX to a printer attached to a Windows 2003. The printing is done using lp.
I can see that the printjob on windows has... (0 Replies)
I have a printer on sun solaris configured on a terminal server I want to print on this printer from windows xp or windows 2003 I put the devices that want to print in the hosts and hosts.lpd file
and the I use the comman lpr -S my_server -P unix_printer my_file
but the job didn't go . can I... (1 Reply)
Hi, I have done this year ago, and now I need to do it again, but did not remember how I do it. I have a slip printer on a windows xp workstation and i need to print from SCO unix application to that printer. I try to create a remote printer but the only option available is unix, the other to... (0 Replies)
ports(7) Miscellaneous Information Manual ports(7)NAME
ports, port_names - Device (tty and lp) names for serial and parallel ports
SYNOPSIS
Default Serial Ports:
/dev/tty00
/dev/tty01 (not present on a single-port system)
Parallel Port:
/dev/lp0
DESCRIPTION
AlphaStation and AlphaServer systems provide one or two 9-pin serial communication ports. These ports are usually labelled 1 (COMM1) and 2
(COMM2), but they may be identified by different icons. Using the appropriate serial cable and terminator, you can connect a serial
printer, external modem, or character-cell terminal to a serial port. Most AlphaStation and AlphaServer systems also provide one parallel
port, for use with a parallel printer.
When you add a device to your system, the installation documentation may instruct you to map the device pathname to the port. These
devices are located in the /dev directory.
For serial-line ports, the two default device pathnames are: This pathname always maps to 1, COMM1, the lowest port number, an icon for a
terminal console, or the only serial port (on a single-port system). This pathname always maps to 2, COMM2, the next numbered port, or (if
one serial port is labeled with an icon for a terminal console) the remaining serial port.
If your system hardware has been extended to include additional serial ports, the pathnames /dev/tty02, /dev/tty03, and so forth, may also
be available to you. However, most systems have only /dev/tty00 and /dev/tty01 as the device pathnames for serial ports.
The one parallel port on an AlphaStation or AlphaServer may be labeled with the word printer or a printer icon. On some systems, the paral-
lel port may not be labeled. The device pathname for the parallel port is /dev/lp0. Currently, Tru64 UNIX does not fully support parallel
printers, so fewer devices are connected to this port as compared to serial ports.
If you are connecting a terminal console to your system, it must be connected to the serial port mapped to /dev/tty00. For other serial
devices, it does not matter which of the serial ports you choose for the connection. For example, suppose you are setting up a system that
has two serial ports, labeled 1 and 2. You intend to use a serial-line terminal rather than a workstation monitor as the system console and
also want to connect a serial-line printer to the system. In this case, you must connect the terminal to the port labeled 1 (with the
device pathname /dev/tty00). Therefore, you must connect the printer to the remaining port labeled 2 (with the device pathname /dev/tty01).
If, for the same type of system, you intend to use a workstation monitor as the system console, it does not matter which serial port you
use for a serial-line printer or modem. In other words, you can connect the printer to either port 1 (with pathname /dev/tty00) or port 2
(with pathname /dev/tty01). When prompted to enter a /dev/tty** pathname by the lprsetup script or the Print configuration tool in the CDE
Application Manager, you would specify /dev/tty00 if you connected the printer to port 1 or /dev/tty01 if you connected the printer to port
2.
See the System Administration manual for more information on setting up consoles (including remote consoles) and printers. See the
modem(7) reference page for more information on setting up modems.
SEE ALSO
Commands: lprsetup(8)
Devices: ace(7), modem(7)
System Administration delim off
ports(7)