is mdadm --incremental --rebuild --run --scan destructive?
Hello Unix Community:
My task to figure out how to add a 20G volume to an existing EBS Array (RAID0) at AWS.
I haven't been told that growing the existing volumes isn't an option, or adding another larger volume to the existing array is the way to go. The client's existing data-store is growing fast and he needs more space.
The boss said "Add".... but I am free to conceptualize some solutions he may not have thought of.
I have RTFM'd today for about 3 hours and came to these 2 possibilities. Add or grow...
After a cursory review (and some in depth reading) I am uncertain, so I have to ask
is "mdadm --incremental --rebuild --run --scan" destructive to data or will it simply incorporate the new volume into the designated mdX?
"Possibly start the array" implies that it is not started, but what if the array is already started?
I further wonder if I can just create a new volume and edit the /etc/mdadm/mdadm.conf
and --scan and/or --rebuild and if that would be destructive?
Hi guys,
I'm new to RAID although I've had a server running raid5 for a while. It was delivered preinstalled like this and I never really wondered how to monitor and maintain it. This quick introduction just to let you understand why I'm such an idiot asking such a silly question.
Now what... (0 Replies)
Hello,
i have a system with 6 sata3 seagate st3000dm01 disks running on stable Debian with software raid mdadm. i have md0 for root and md1 for swap and md2 for the files. i now want to add one more disk = sdh4 for md2 but i got this errors:
The new disk is connected to an 4 port sata... (7 Replies)
I am trying to format a Seagate 2 Gb SCSI drive using the HP-UX 9.0 support disc and I receive a message that says: DESTRUCTIVE MODE REQUIRED TO EXECUTIVE THIS COMMAND (SCD2WARN 106). I have entered this command several times on other SCSI drives and never got this message. Anyone ever see this... (8 Replies)
had this RHEL 5 installation with /dev/sda1 and /dev/sda2 running..
created two more partitions /dev/sdj1 and /dev/sdj2 , the same sized partition as /dev/sda
trying to use mdadm to create RAID1 ..
I cannot even do it in "rescue" mode, I wonder if it can be done..
it kept... (2 Replies)
Hi I'm trying to hack a web server as part of an assignment and have gotten it to exec commands but I cannot pass commands arguments as the program splits up space separated words and only execs the first one. Is there anything I can pass to cause any sort of damage in one word? Btw webserver runs... (1 Reply)
Hi everyone,
I am not sure if I understand how mdadm --create /dev/md0 --level=container works?
A device called /dev/md0 appears in /proc/mdstat but I am not sure how to use that device?
I have 2 blank drives with 1 500GB partition on each. I would like to setup mirroring, but not in the... (0 Replies)
Hello, I have 4 drives (500G each) in a raid 10, I got a power failior and this is the result?
cat /proc/mdstat
Personalities :
md126 : inactive sdb sdc sdd sde
1953536528 blocks super external:-md127/0
md127 : inactive sdd(S) sde(S) sdb(S) sdc(S)
9028 blocks super... (3 Replies)
Hi All
I have a RAID 5 array consisting of 4 drives that had a partial drive failure in one of the drives.
Rebooting shows the faulty drive as background rebuilding and mdadm /dev/ARRAYID shows three drives as in sync with the fourth drive as spare rebuilding.
However the array won't come... (9 Replies)
Hi,
I have a three disk raid 5, with 500GB disks.
This is close to being full, and whilst I can just add another disk and rebuild to add another 500GB, I would prefer to replace with 1TB disks. So i have some questions.
Can I replace these disks one by one with bigger disks? I... (1 Reply)