is mdadm --incremental --rebuild --run --scan destructive?
Hello Unix Community:
My task to figure out how to add a 20G volume to an existing EBS Array (RAID0) at AWS.
I haven't been told that growing the existing volumes isn't an option, or adding another larger volume to the existing array is the way to go. The client's existing data-store is growing fast and he needs more space.
The boss said "Add".... but I am free to conceptualize some solutions he may not have thought of.
I have RTFM'd today for about 3 hours and came to these 2 possibilities. Add or grow...
After a cursory review (and some in depth reading) I am uncertain, so I have to ask
is "mdadm --incremental --rebuild --run --scan" destructive to data or will it simply incorporate the new volume into the designated mdX?
Code:
-I, --incremental
Add a single device into an appropriate array, and possibly start the array.
"Possibly start the array" implies that it is not started, but what if the array is already started?
I further wonder if I can just create a new volume and edit the /etc/mdadm/mdadm.conf
and --scan and/or --rebuild and if that would be destructive?
Hi guys,
I'm new to RAID although I've had a server running raid5 for a while. It was delivered preinstalled like this and I never really wondered how to monitor and maintain it. This quick introduction just to let you understand why I'm such an idiot asking such a silly question.
Now what... (0 Replies)
Hello,
i have a system with 6 sata3 seagate st3000dm01 disks running on stable Debian with software raid mdadm. i have md0 for root and md1 for swap and md2 for the files. i now want to add one more disk = sdh4 for md2 but i got this errors:
The new disk is connected to an 4 port sata... (7 Replies)
I am trying to format a Seagate 2 Gb SCSI drive using the HP-UX 9.0 support disc and I receive a message that says: DESTRUCTIVE MODE REQUIRED TO EXECUTIVE THIS COMMAND (SCD2WARN 106). I have entered this command several times on other SCSI drives and never got this message. Anyone ever see this... (8 Replies)
had this RHEL 5 installation with /dev/sda1 and /dev/sda2 running..
created two more partitions /dev/sdj1 and /dev/sdj2 , the same sized partition as /dev/sda
trying to use mdadm to create RAID1 ..
I cannot even do it in "rescue" mode, I wonder if it can be done..
it kept... (2 Replies)
Hi I'm trying to hack a web server as part of an assignment and have gotten it to exec commands but I cannot pass commands arguments as the program splits up space separated words and only execs the first one. Is there anything I can pass to cause any sort of damage in one word? Btw webserver runs... (1 Reply)
Hi everyone,
I am not sure if I understand how mdadm --create /dev/md0 --level=container works?
A device called /dev/md0 appears in /proc/mdstat but I am not sure how to use that device?
I have 2 blank drives with 1 500GB partition on each. I would like to setup mirroring, but not in the... (0 Replies)
Hello, I have 4 drives (500G each) in a raid 10, I got a power failior and this is the result?
cat /proc/mdstat
Personalities :
md126 : inactive sdb sdc sdd sde
1953536528 blocks super external:-md127/0
md127 : inactive sdd(S) sde(S) sdb(S) sdc(S)
9028 blocks super... (3 Replies)
Hi All
I have a RAID 5 array consisting of 4 drives that had a partial drive failure in one of the drives.
Rebooting shows the faulty drive as background rebuilding and mdadm /dev/ARRAYID shows three drives as in sync with the fourth drive as spare rebuilding.
However the array won't come... (9 Replies)
Hi,
I have a three disk raid 5, with 500GB disks.
This is close to being full, and whilst I can just add another disk and rebuild to add another 500GB, I would prefer to replace with 1TB disks. So i have some questions.
Can I replace these disks one by one with bigger disks? I... (1 Reply)