Code:
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-RELEASE #1: Fri Oct 24 20:29:23 UTC 2008
levenson@:/usr/src/sys/i386/compile/CUSTOM-24-10-2008
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) D CPU 3.00GHz (2999.98-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf65 Stepping = 5
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0xe49d<SSE3,RSVD2,MON,DS_CPL,EST,CNXT-ID,CX16,xTPR,PDCM>
AMD Features=0x20000000<LM>
AMD Features2=0x1<LAHF>
Cores per package: 2
real memory = 1610219520 (1535 MB)
avail memory = 1559957504 (1487 MB)
ACPI APIC Table: <A_M_I_ OEMAPIC >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <A_M_I_ OEMRSDT> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 5ff00000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
cpu0: <ACPI CPU> on acpi0
ACPI Warning (tbutils-0243): Incorrect checksum in table [OEMB] - C7, should be C2 [20070320]
ACPI Error (psparse-0626): Method parse/execution failed [\\_PR_.CPU1._OSC] (Node 0xc4bed980), AE_ALREADY_EXISTS
ACPI Error (psparse-0626): Method parse/execution failed [\\_PR_.CPU1._PDC] (Node 0xc4bed9a0), AE_ALREADY_EXISTS
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
ACPI Error (psparse-0626): Method parse/execution failed [\\_PR_.CPU2._OSC] (Node 0xc4bed860), AE_ALREADY_EXISTS
ACPI Error (psparse-0626): Method parse/execution failed [\\_PR_.CPU2._PDC] (Node 0xc4bed880), AE_ALREADY_EXISTS
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci3: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xe800-0xe87f mem 0xdf000000-0xdfffffff,0xe0000000-0xefffffff,0xdc000000-0xddffffff irq 16 at device 0.0 on pci3
nvidia0: <GeForce 8600 GT> on vgapci0
vgapci0: child nvidia0 requested pci_enable_busmaster
vgapci0: child nvidia0 requested pci_enable_io
nvidia0: [GIANT-LOCKED]
nvidia0: [ITHREAD]
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
uhci0: <UHCI (generic) USB controller> port 0x9000-0x901f irq 20 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0x9400-0x941f irq 17 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
uhci2: <UHCI (generic) USB controller> port 0x9800-0x981f irq 18 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb2: <UHCI (generic) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
uhci3: <UHCI (generic) USB controller> port 0xa000-0xa01f irq 19 at device 29.3 on pci0
uhci3: [GIANT-LOCKED]
uhci3: [ITHREAD]
usb3: <UHCI (generic) USB controller> on uhci3
usb3: USB revision 1.0
uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
uhub3: 2 ports with 2 removable, self powered
ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xdbeffc00-0xdbefffff irq 20 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb4
uhub4: 8 ports with 8 removable, self powered
pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci1: <ACPI PCI bus> on pcib3
skc0: <D-Link DGE-530T Gigabit Ethernet> port 0xc000-0xc0ff mem 0xdbff4000-0xdbff7fff irq 17 at device 0.0 on pci1
skc0: DGE-530T Gigabit Ethernet Adapter rev. (0x9)
sk0: <Marvell Semiconductor, Inc. Yukon> on skc0
sk0: Ethernet address: 00:1c:f0:98:36:f4
miibus0: <MII bus> on sk0
e1000phy0: <Marvell 88E1011 Gigabit PHY> PHY 0 on miibus0
e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto
skc0: [ITHREAD]
emu10kx0: <Creative Audigy 2 ZS [SB0350]> port 0xc400-0xc43f irq 21 at device 1.0 on pci1
emu10kx0: [ITHREAD]
pcm0: <EMU10Kx DSP front PCM interface> on emu10kx0
pcm0: <SigmaTel STAC9750/51 AC97 Codec>
pcm1: <EMU10Kx DSP rear PCM interface> on emu10kx0
pcm2: <EMU10Kx DSP center PCM interface> on emu10kx0
pcm3: <EMU10Kx DSP subwoofer PCM interface> on emu10kx0
pcm4: <EMU10Kx DSP side PCM interface> on emu10kx0
fwohci0: <1394 Open Host Controller Interface> mem 0xdbfff800-0xdbffffff,0xdbff8000-0xdbffbfff irq 22 at device 1.2 on pci1
fwohci0: [FILTER]
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:02:3c:01:41:02:97:bc
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:02:3c:02:97:bc
fwe0: Ethernet address: 02:02:3c:02:97:bc
fwip0: <IP over FireWire> on firewire0
fwip0: Firewire address: 00:02:3c:01:41:02:97:bc @ 0xfffe00000000, S400, maxrec 2048
sbp0: <SBP-2/SCSI over FireWire> on firewire0
dcons_crom0: <dcons configuration ROM> on firewire0
dcons_crom0: bus_addr 0x189c000
fwohci0: Initiate bus reset
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc1, gen=1, CYCLEMASTER mode
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH7 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
atapci1: <Intel ICH7 SATA300 controller> port 0xb800-0xb807,0xb400-0xb403,0xb000-0xb007,0xa800-0xa803,0xa400-0xa40f irq 23 at device 31.2 on pci0
atapci1: [ITHREAD]
ata2: <ATA channel 0> on atapci1
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci1
ata3: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model MouseMan+, device ID 0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio0: [FILTER]
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xc0000-0xccfff pnpid ORM0000 on isa0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: <Parallel port bus> on ppc0
ppbus0: [ITHREAD]
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ppc0: [GIANT-LOCKED]
ppc0: [ITHREAD]
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 1.000 msec
firewire0: 2 nodes, maxhop <= 1, cable IRM = 1 (me)
firewire0: bus manager 1 (me)
ad0: 76319MB <Seagate ST380011A 3.06> at ata0-master UDMA100
ad1: 238475MB <Seagate ST3250823A 3.03> at ata0-slave UDMA100
ad5: 238475MB <Seagate ST3250823AS 3.01> at ata2-slave SATA150
ad6: 190782MB <Seagate ST3200822AS 3.01> at ata3-master SATA150
ad7: 190782MB <Seagate ST3200822AS 3.01> at ata3-slave SATA150
GEOM_LABEL: Label for provider ad1s1 is ntfs/Cinema3.
GEOM_LABEL: Label for provider ad5s1 is ntfs/For Users.
GEOM_LABEL: Label for provider ad6s1 is ntfs/Cinema2.
GEOM_LABEL: Label for provider ad7s1 is ntfs/Cinema1.
SMP: AP CPU #1 Launched!
Trying to mount root from ufs:/dev/ad0s2a
WARNING: / was not properly dismounted
WARNING: /home was not properly dismounted
/home: mount pending error: blocks 1472 files 7
WARNING: /tmp was not properly dismounted
/tmp: mount pending error: blocks 0 files 1
WARNING: /usr was not properly dismounted
WARNING: /var was not properly dismounted
IP Filter: v4.1.28 initialized. Default = pass all, Logging = enabled
fuse4bsd: version 0.3.9-pre1, FUSE ABI 7.8
GEOM_LABEL: Label ntfs/For Users removed.
GEOM_LABEL: Label ntfs/Cinema1 removed.
GEOM_LABEL: Label ntfs/Cinema2 removed.
GEOM_LABEL: Label ntfs/Cinema3 removed.
Warning: pid 1395 used static ldt allocation.
See the i386_set_ldt man page for more info
Warning: pid 1395 used static ldt allocation.
See the i386_set_ldt man page for more info
Warning: pid 1395 used static ldt allocation.
See the i386_set_ldt man page for more info
Warning: pid 1395 used static ldt allocation.
See the i386_set_ldt man page for more info
Warning: pid 1395 used static ldt allocation.
See the i386_set_ldt man page for more info
Warning: pid 1395 used static ldt allocation.
See the i386_set_ldt man page for more info
Warning: pid 1395 used static ldt allocation.
See the i386_set_ldt man page for more info
Warning: pid 1395 used static ldt allocation.
See the i386_set_ldt man page for more info
Warning: pid 1395 used static ldt allocation.
See the i386_set_ldt man page for more info
Warning: pid 1395 used static ldt allocation.
See the i386_set_ldt man page for more info
pid 9254 (totem-video-thumbna), uid 1001: exited on signal 11 (core dumped)
pid 18773 (totem-video-thumbna), uid 1001: exited on signal 11 (core dumped)
pid 55840 (totem-video-thumbna), uid 1001: exited on signal 11 (core dumped)
NVRM: Xid (0003:00): 13, 0004 00000000 00008297 000015f0 04840480 00000100
NVRM: Xid (0003:00): 13, 0005 00000000 00008297 00001530 00000001 00000100
NVRM: Xid (0003:00): 13, 0005 00000000 00008297 00001530 00000001 00000100
NVRM: Xid (0003:00): 13, 0005 00000000 00008297 00000f04 00000000 00000100
NVRM: Xid (0003:00): 13, 0005 00000000 00008297 00000f04 00000000 00000100
NVRM: Xid (0003:00): 13, 0005 00000000 00005039 00000100 00000000 00000002
NVRM: Xid (0003:00): 13, 0005 00000000 00008297 000015e0 00000000 00000100
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
GEOM_LABEL: Label for provider ad6s1 is ntfs/Cinema2.
GEOM_LABEL: Label for provider ad7s1 is ntfs/Cinema1.
GEOM_LABEL: Label for provider ad1s1 is ntfs/Cinema3.
GEOM_LABEL: Label for provider ad5s1 is ntfs/For Users.
Waiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...3 2 2 0 0 done
All buffers synced.
Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-RELEASE #1: Fri Oct 24 20:29:23 UTC 2008
levenson@:/usr/src/sys/i386/compile/CUSTOM-24-10-2008
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) D CPU 3.00GHz (2999.98-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf65 Stepping = 5
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0xe49d<SSE3,RSVD2,MON,DS_CPL,EST,CNXT-ID,CX16,xTPR,PDCM>
AMD Features=0x20000000<LM>
AMD Features2=0x1<LAHF>
Cores per package: 2
real memory = 1610219520 (1535 MB)
avail memory = 1559957504 (1487 MB)
ACPI APIC Table: <A_M_I_ OEMAPIC >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <A_M_I_ OEMXSDT> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 5ff00000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
cpu0: <ACPI CPU> on acpi0
ACPI Warning (tbutils-0243): Incorrect checksum in table [OEMB] - C7, should be C2 [20070320]
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci3: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xe800-0xe87f mem 0xdf000000-0xdfffffff,0xe0000000-0xefffffff,0xdc000000-0xddffffff irq 16 at device 0.0 on pci3
nvidia0: <GeForce 8600 GT> on vgapci0
vgapci0: child nvidia0 requested pci_enable_busmaster
vgapci0: child nvidia0 requested pci_enable_io
nvidia0: [GIANT-LOCKED]
nvidia0: [ITHREAD]
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
uhci0: <UHCI (generic) USB controller> port 0x9000-0x901f irq 20 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0x9400-0x941f irq 17 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
uhci2: <UHCI (generic) USB controller> port 0x9800-0x981f irq 18 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb2: <UHCI (generic) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
uhci3: <UHCI (generic) USB controller> port 0xa000-0xa01f irq 19 at device 29.3 on pci0
uhci3: [GIANT-LOCKED]
uhci3: [ITHREAD]
usb3: <UHCI (generic) USB controller> on uhci3
usb3: USB revision 1.0
uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
uhub3: 2 ports with 2 removable, self powered
ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xdbeffc00-0xdbefffff irq 20 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb4
uhub4: 8 ports with 8 removable, self powered
pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci1: <ACPI PCI bus> on pcib3
skc0: <D-Link DGE-530T Gigabit Ethernet> port 0xc000-0xc0ff mem 0xdbff4000-0xdbff7fff irq 17 at device 0.0 on pci1
skc0: DGE-530T Gigabit Ethernet Adapter rev. (0x9)
sk0: <Marvell Semiconductor, Inc. Yukon> on skc0
sk0: Ethernet address: 00:1c:f0:98:36:f4
miibus0: <MII bus> on sk0
e1000phy0: <Marvell 88E1011 Gigabit PHY> PHY 0 on miibus0
e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto
skc0: [ITHREAD]
emu10kx0: <Creative Audigy 2 ZS [SB0350]> port 0xc400-0xc43f irq 21 at device 1.0 on pci1
emu10kx0: [ITHREAD]
pcm0: <EMU10Kx DSP front PCM interface> on emu10kx0
pcm0: <SigmaTel STAC9750/51 AC97 Codec>
pcm1: <EMU10Kx DSP rear PCM interface> on emu10kx0
pcm2: <EMU10Kx DSP center PCM interface> on emu10kx0
pcm3: <EMU10Kx DSP subwoofer PCM interface> on emu10kx0
pcm4: <EMU10Kx DSP side PCM interface> on emu10kx0
fwohci0: <1394 Open Host Controller Interface> mem 0xdbfff800-0xdbffffff,0xdbff8000-0xdbffbfff irq 22 at device 1.2 on pci1
fwohci0: [FILTER]
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:02:3c:01:41:02:97:bc
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:02:3c:02:97:bc
fwe0: Ethernet address: 02:02:3c:02:97:bc
fwip0: <IP over FireWire> on firewire0
fwip0: Firewire address: 00:02:3c:01:41:02:97:bc @ 0xfffe00000000, S400, maxrec 2048
sbp0: <SBP-2/SCSI over FireWire> on firewire0
dcons_crom0: <dcons configuration ROM> on firewire0
dcons_crom0: bus_addr 0x189c000
fwohci0: Initiate bus reset
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc1, gen=1, CYCLEMASTER mode
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH7 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
atapci1: <Intel ICH7 SATA300 controller> port 0xb800-0xb807,0xb400-0xb403,0xb000-0xb007,0xa800-0xa803,0xa400-0xa40f irq 23 at device 31.2 on pci0
atapci1: [ITHREAD]
ata2: <ATA channel 0> on atapci1
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci1
ata3: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model MouseMan+, device ID 0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio0: [FILTER]
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xc0000-0xccfff pnpid ORM0000 on isa0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: <Parallel port bus> on ppc0
ppbus0: [ITHREAD]
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ppc0: [GIANT-LOCKED]
ppc0: [ITHREAD]
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 1.000 msec
firewire0: 2 nodes, maxhop <= 1, cable IRM = 1 (me)
firewire0: bus manager 1 (me)
ad0: 76319MB <Seagate ST380011A 3.06> at ata0-master UDMA100
ad1: 238475MB <Seagate ST3250823A 3.03> at ata0-slave UDMA100
ad5: 238475MB <Seagate ST3250823AS 3.01> at ata2-slave SATA150
ad6: 190782MB <Seagate ST3200822AS 3.01> at ata3-master SATA150
ad7: 190782MB <Seagate ST3200822AS 3.01> at ata3-slave SATA150
GEOM_LABEL: Label for provider ad1s1 is ntfs/Cinema3.
GEOM_LABEL: Label for provider ad5s1 is ntfs/For Users.
GEOM_LABEL: Label for provider ad6s1 is ntfs/Cinema2.
GEOM_LABEL: Label for provider ad7s1 is ntfs/Cinema1.
SMP: AP CPU #1 Launched!
Trying to mount root from ufs:/dev/ad0s2a
IP Filter: v4.1.28 initialized. Default = pass all, Logging = enabled
fuse4bsd: version 0.3.9-pre1, FUSE ABI 7.8