10 More Discussions You Might Find Interesting
1. Solaris
Hello,
I have an unloaded T5140 machine and want to access the ILOM for the first time and subsequently the network port after that., and then load Solaris 10 the final January 2011 build.
The first part is what confuses me -the cabling.
I am coming from a Windows machine (w/appropriate... (5 Replies)
Discussion started by: joboy
5 Replies
2. Programming
Hi
I try to communicate with a GSM modem, from C, for sending SMS.
I use standart AT-commands.
Working well with terminal.
There is no problem writing ti the port.
But when I try to read I only get a echo, I write "ATI" and get "ATI" back, I should get somthing like "SIEMENS 35... (4 Replies)
Discussion started by: dmiller
4 Replies
3. Solaris
Hi Everyone,
In my environment, I have few T5220. On the iLOM Management Card, I have both Network and Serial port are cabled, I don't have any issues while I try to connect using Network Management port, but when I try to connect the serial port for the same server which is actually connected... (3 Replies)
Discussion started by: bobby320
3 Replies
4. Shell Programming and Scripting
Hi,
I have a external board connected to my serial port. I need to execute "shutdown -r now" command when system boot up. When system boots up it requires a username ans password. Then I need to run my command. I can use rc script but that is rebooting system before it asks for username and... (0 Replies)
Discussion started by: charlie.arya
0 Replies
5. Windows & DOS: Issues & Discussions
Hello all.
I have an old computer with M$-DOS 7. I want to use it like a dumb terminal, with telnet. I need to connect it to my desktop These are my questions:
How can i configure the serial port on dos?
How can i telnet form dos to the serial port?
How can i set up a telnet server on the... (12 Replies)
Discussion started by: mghis
12 Replies
6. AIX
Hi,
How can i configure my modem in AIX thru serial port (sa0-->tty0)
I have two port serial card configured as sa0
I created tty1 which port is tty0 and which port is tty1 how can i know?? (1 Reply)
Discussion started by: pchangba
1 Replies
7. Programming
Hello!
Can someone advice me which method I will use if I want to communicate with device via RS232 serial port with this requirements:
1. Serial port is opened in non-canonical mode.
2. All the time I need to check is there something to read.
3. If I have to write something I need to write it... (6 Replies)
Discussion started by: jvrlic
6 Replies
8. Programming
I am developing an application in c with Linux OS, where a radio modem working at baud rate 9600 will be attached to PC on serial port. More than four such units will be communicating at one time, so there may be jamming or data corruption. Each module will be transmitting Data packets less than... (2 Replies)
Discussion started by: raj8109
2 Replies
9. UNIX for Advanced & Expert Users
I am using system running on red hat linux 4.
I had connected health measuring machine to the serial port and configured it
stty -F /dev/ttyS0 9600 -parenb cs8 -cstopb
this machine requires a command to be passed to it for giving output. I am unable to pass command hexa format(0x68) to the... (4 Replies)
Discussion started by: netsavant
4 Replies
10. UNIX for Advanced & Expert Users
Hi ,
I need to have an application where in I am able to create a virtual Serial port on a UNIX machine for a remote device which is accessible by a IP address and a port number (by terminal server). Both the machine and the remote device are on the same network. So after this application is... (1 Reply)
Discussion started by: naveenkj
1 Replies
GAMMU-DETECT(1) Gammu GAMMU-DETECT(1)
NAME
gammu-detect - Gammu device detection
New in version 1.28.95.
SYNOPSIS
gammu-detect [OPTIONS]
DESCRIPTION
Script to detect available devices, which might be suitable for gammu.
Note This program lists all devices, which might be suitable, it does not do any probing on devices them self.
Currently it supports following devices:
o USB devices using udev
o Serial ports using udev
o Serial ports on Windows
o Bluetooth devices using Bluez
Note Supported devices depend on platform you are using and compiled in features. You can find out what is actually compiled in by run-
ning gammu-detect -v.
This program follows the usual GNU command line syntax, with long options starting with two dashes (--). A summary of options is included
below.
-h, --help
Show summary of options.
-d, --debug
Show debugging output for detecting devices.
-v, --version
Show version information and compiled in features.
-u, --no-udev
Disables scanning of udev.
-b, --no-bluez
Disables scanning using Bluez.
-w, --no-win32-serial
Disables scanning of Windows serial ports.
OUTPUT
The output of gammu-detect is configuration file for Gammu (see gammurc) with configuration section for every device which might be used
with gammu.
Note You can choose which section to use in gammu by gammu -s.
When invoked as gammu-detect -d, also all examined devices are listed as comments in the output.
EXAMPLE
; Configuration file generated by gammu-detect.
; Please check The Gammu Manual for more information.
[gammu]
device = /dev/ttyACM0
name = Nokia E52
connection = at
[gammu1]
device = /dev/ttyACM1
name = Nokia E52
connection = at
[gammu2]
device = /dev/ttyS0
name = Phone on serial port 0
connection = at
[gammu3]
device = /dev/ttyS1
name = Phone on serial port 1
connection = at
[gammu4]
device = /dev/ttyS2
name = Phone on serial port 2
connection = at
[gammu5]
device = /dev/ttyS3
name = Phone on serial port 3
connection = at
[gammu6]
device = 5C:57:C8:BB:BB:BB
name = Nokia E52
connection = bluephonet
AUTHOR
Michal iha <michal@cihar.com>
COPYRIGHT
2009-2012, Michal iha <michal@cihar.com>
1.31.90 February 24, 2012 GAMMU-DETECT(1)