|
|
Fence status - beginners problems!!
|
|
FENCE_AGENT(8) System Manager's Manual FENCE_AGENT(8) NAME
fence_ilo - Fence agent for HP iLO fence_ilo2 - Fence agent for HP iLO2 (symlink) DESCRIPTION
fence_ilo is an I/O Fencing agent used for HP servers with the Integrated Light Out (iLO) PCI card.The agent opens an SSL connection to the iLO card. Once the SSL connection is established, the agent is able to communicate with the iLO card through an XML stream. fence_ilo accepts options on the command line as well as from stdin. Fenced sends parameters through stdin when it execs the agent. fence_ilo can be run by itself with command line options. This is useful for testing and for turning outlets on or off from scripts. Vendor URL: http://www.hp.com PARAMETERS
-a, --ip=[ip] IP Address or Hostname This parameter is always required. -l, --username=[name] Login Name This parameter is always required. -p, --password=[password] Login password or passphrase -z, --ssl SSL connection (Default Value: 1) -t, --notls Disable TLS negotiation -r, --ribcl-version=[version] Force ribcl version to use -u, --ipport=[port] TCP/UDP port to use for connection with device (Default Value: 443) -4, --inet4-only Forces agent to use IPv4 addresses only -6, --inet6-only Forces agent to use IPv6 addresses only -S, --password-script=[script] Script to retrieve password --ssl-secure SSL connection with verifying fence device's certificate --ssl-insecure SSL connection without verifying fence device's certificate -o, --action=[action] Fencing Action (Default Value: reboot) -v, --verbose Verbose mode -D, --debug-file=[debugfile] Write debug information to given file -V, --version Display version information and exit -h, --help Display help and exit --power-timeout=[seconds] Test X seconds for status change after ON/OFF (Default Value: 20) --shell-timeout=[seconds] Wait X seconds for cmd prompt after issuing command (Default Value: 3) --login-timeout=[seconds] Wait X seconds for cmd prompt after login (Default Value: 10) --power-wait=[seconds] Wait X seconds after issuing ON/OFF (Default Value: 0) --delay=[seconds] Wait X seconds before fencing is started (Default Value: 0) --retry-on=[attempts] Count of attempts to retry power on (Default Value: 3) ACTIONS
on Power on machine. off Power off machine. reboot Reboot machine. status This returns the status of the plug/virtual machine. list List available plugs with aliases/virtual machines if there is support for more then one device. Returns N/A otherwise. monitor Check the health of fence device metadata Display the XML metadata describing this resource. STDIN PARAMETERS
ipaddr IP Address or Hostname This parameter is always required. login Login Name This parameter is always required. passwd Login password or passphrase ssl SSL connection (Default Value: 1) notls Disable TLS negotiation ribcl Force ribcl version to use ipport TCP/UDP port to use for connection with device (Default Value: 443) inet4_only Forces agent to use IPv4 addresses only inet6_only Forces agent to use IPv6 addresses only passwd_script Script to retrieve password ssl_secure SSL connection with verifying fence device's certificate ssl_insecure SSL connection without verifying fence device's certificate action Fencing Action (Default Value: reboot) verbose Verbose mode debug Write debug information to given file version Display version information and exit help Display help and exit power_timeout Test X seconds for status change after ON/OFF (Default Value: 20) shell_timeout Wait X seconds for cmd prompt after issuing command (Default Value: 3) login_timeout Wait X seconds for cmd prompt after login (Default Value: 10) power_wait Wait X seconds after issuing ON/OFF (Default Value: 0) delay Wait X seconds before fencing is started (Default Value: 0) retry_on Count of attempts to retry power on (Default Value: 3) fence_ilo (Fence Agent) 2009-10-20 FENCE_AGENT(8)
