Hi,
I have a Barcode printer.
It's defined as a remote printer on the system.
The /etc/lp/interface/<printer> file is printing has a part that enables Hebrew printing.
For some reason the Printer is printing in a very small font.
I'll attach the interface file:
This is the file.
Can anyone tell me how to increase the font size?
The printer is a regular printer , and attached to the network with a HP jet direct card to the network.
It has a network IP address and it is configured correctly on the machine as a remote printer. The user is printing to it- but the font is to small...
Ok.... I know what I am about to tell you might seem weird... but.. hear me out...
I had a problem once.. where I had a laser printer connected to my network via a Jet Direct card that was Internal to the printer. In other words... my ethernet cable was plugged directly into an internal JetDirect card.
It seems that on occasions.. passing printer commands through the interface script would have no effect on the printer. The font wouldn't change, nor would the paper trays switch..etc..
I contacted HP and I was told by HP.. that I needed to pass those commands via the parallel port. I purchased an external print server and located it near my printer. Configured my print server and installed the parallel cable between my print server and my printers parallel port.. It worked like a charm.
I could NEVER get HP to tell me why this would only work this way. I can't say that it will solve your problem, but you might want to give it a shot.
Hi,
Is it possible to find the printer location and printer type (whether it is local or network) using command in Linux ?
Thanks in advance. (1 Reply)
Generic Printer giving garbage fonts in Arabic !
Guy's
I have confgured this printer in AIX 6.1 by the following steps ...
Smitty
Print Spooling
AIX Print Spooling
Add a Print Queue
I Selected from the box this kind
hpJetDirect Network Printer (HP JetDirect)
then
... (7 Replies)
Hello
Let me first give a small overview of the setup. All printers are connected to Windows 2000 servers. There are a lot of UNIX (AIX & HP-UX) servers as well which have SAP running.
I'm working on a script to add printers to a specified SAP instance. I want to verify the user input (to... (0 Replies)
Hi All,
I am trying to configure printer in solaris 10 with the help of print manager. There is no printer attached to my system, ia m doing it for test purpose. However I am unable to do so coz its pops up window - Heading as error with option as dismiss and cancel. Kindly help as I am... (3 Replies)
I want to have a script that will download a soft font to a printer so that
any one may run it when the printer is turned off then on.
What would be the easiest way to do that? Linux Redhat.
Thank you
Smokey (0 Replies)
We were printing to a serial laser printer with all the HP codes to generate a form (i.e. lines, boxes, etc.) Thus the file is filled w/ control codes. We are switching to an IP printer and we can no longer print directly to the device (i.e. cp text /dev/tty11). It looks like we have to use the lp... (2 Replies)