Remote Print Queues

10 More Discussions You Might Find Interesting

1. Shell Programming and Scripting

awk remote multiple hosts print remote hostname and output

Hi all, i'm trying to gether multiple pattern on remote hosts, and trying to print hostname and the pattern, ssh remoteserver1 -C 'hostname 2>&1;cat /var/log/server1.log | awk -F ";" '"'"'{ print " "$2" "$5}'"'"'| sort | uniq -c | sort -g -r ' The output is the following, remoteserver1 ...

2. Red Hat

Restarting CUPS will restart existing print queues?

Hi, We need to restart CUPS service, and want to know if restarting CUPS service will stop/start existing printing queues? Thank you!

3. Solaris

How to check "faulty" or "stalled" print queues - SAP systems?

Hi all, First off, sorry for a long post but I think I have no other option if I need to explain properly what I need help for. I need some advise on how best to check for "faulty" or "stalled/jammed' print queues. At the moment, I have three (3) application servers which also acts as print...

4. SCO

Print banner appearing with remote printing

Hi, I have set up remote printing using a HP Direct Jet print server. Prints sent to the printer connected to the device prints fine except that at the end of the report the following info also appears - Users:, Class:, Job:. How can I disable this from printing.

5. OS X (Apple)

Server Admin- Print queues

Hi there, I have some problems in re-setting up the print queues on XServe running Mac OSX Server 10.3.4 I did have the print queues running at some stage, until some unknown error occured that stopped all the queues from working. Recently I tried to re-create the queues, by deleting the old...

6. UNIX for Advanced & Expert Users

jobs stalled in remote print queue

I have a printer in another state that is setup as follows: lj8100 printer connected to their printserver (a w2k box); users connect to a unix app on our Sun server via Exceed (we are two states away via WAN); users submit print jobs through an established print queue through the unix app to...

7. Linux

print queues

RH 7.2 Are there any commands to check the print queue status? Something along the lines of AIX's "qchk"? Thanks!!

8. UNIX for Advanced & Expert Users

remote print

I have a remote printing problem: I am running SCO Unix 5.0.6j with remote printing set up to a printserver. I have done this a number of times on a number of different SCO Unix servers, so I am almost positive that I have everything set up correctly. I even have a good listing when I do lpstat...

9. Programming

Solaris- print to a remote queue

Is it possible to send a print job to a print queue on a different machine?

10. UNIX for Dummies Questions & Answers

Print Queues

I have a print queue set up with the following options: remote, standard processing, Hostname=(A Windows 2000 Server), bsd print spooler. It takes about 1 minute to transfer a 100 kb file and it times out (downs the queue) on larger files. When tested on a different system at a different location...

LEARN ABOUT MOJAVE

enable

enable(1)							   User Commands							 enable(1)

NAME

       enable, disable - enable/disable LP printers

SYNOPSIS

       /usr/bin/enable printer...

       /usr/bin/disable [-c | -W]  [ -r [reason]] printer...

DESCRIPTION

       The  enable  command  activates	printers,  enabling  them to print requests submitted by the lp command. enable must be run on the printer
       server.

       The disable command deactivates printers, disabling them from printing requests submitted by the lp command. By default, any requests  that
       are  currently  printing  on printer will be reprinted in their entirety either on printer or another member of the same class of printers.
       The disable command must be run on the print server.

       Use lpstat -p to check the status of printers.

       enable and disable only effect queueing on the print server's spooling system. Executing these commands from a client system will  have	no
       effect on the server.

OPTIONS

       The following options are supported for use with disable:

       -c	       Cancels	any requests that are currently printing on printer. This option cannot be used with the -W option. If the printer
		       is remote, the -c option will be silently ignored.

       -W	       Waits until the request currently being printed is finished before disabling printer. This option cannot be used  with  the
		       -c option. If the printer is remote, the -W option will be silently ignored.

       -r [reason]     Assigns	a  reason  for	the  disabling	of  the  printer(s). This reason applies to all printers specified. This reason is
		       reported by lpstat -p. Enclose reason in quotes if it contains blanks. The default  reason  is  "unknown  reason"  for  the
		       existing printer, and "new printer" for a printer added to the system but not yet enabled.

OPERANDS

       The following operand is supported for both enable and disable:

       printer	       The  name of the printer to be enabled or disabled. Specify printer using atomic name. See printers.conf(4) for information
		       regarding the naming conventions for atomic names.

EXIT STATUS

       The following exit values are returned:

       0	       Successful completion.

       non-zero        An error occurred.

FILES

       /var/spool/lp/*	       LP print queue.

ATTRIBUTES

       See attributes(5) for descriptions of the following attributes:

       +-----------------------------+-----------------------------+
       |      ATTRIBUTE TYPE	     |	    ATTRIBUTE VALUE	   |
       +-----------------------------+-----------------------------+
       |Availability		     |SUNWpcu			   |
       +-----------------------------+-----------------------------+
       |CSI			     |enabled			   |
       +-----------------------------+-----------------------------+

SEE ALSO

       lp(1), lpstat(1), printers.conf(4), attributes(5)

SunOS 5.10							    9 Sep 1996								 enable(1)

UNIX for Dummies Questions & Answers