10 More Discussions You Might Find Interesting
1. Shell Programming and Scripting
getStatusi86()
{
#storing logical volume name
volumelist=`cfgadm -val | grep "Logical Volume" | awk '{print substr($1,9,14)}'`
controller=`echo $volumelist | awk '{print substr($1,2,1)}'`
#errordisk=""
volume1=`echo $volumelist | awk '{print $1}'`
for volume in $volumelist
do... (1 Reply)
Discussion started by: frintocf
1 Replies
2. Solaris
I tried using raidctl earlier today to use my 2 disks in a RAID1 setup and I totally destroyed my OS install. I'm sure I did something funky and it freaked out. No big deal...right?
This is what I was seeing after a reboot.
I decided to just reinstall the OS. It let me go through all of... (3 Replies)
Discussion started by: kingdbag
3 Replies
3. Solaris
I have boot disk mirrored using hardware raid i.e raidctl command.
If I want to place an order for a spare drive and keep it at our location for spare, how do I find the disk specification since #format does not reveal this.
The server is T2000 running Solaris 10.
Any help please. (5 Replies)
Discussion started by: Tirmazi
5 Replies
4. Solaris
using the internal 2 drives mirror was created using raidctl on 100's of our servers . sometime when one drive fails we dont face any issue & we replace the drive with out any problem . but sometimes when one drive fails , system becomes unresponsive and doesnot allow us to login , the only way to... (1 Reply)
Discussion started by: skamal4u
1 Replies
5. UNIX for Dummies Questions & Answers
Hello people i have a question, when i put raidctl -l on sun fire show this
Volume Size Stripe Status Cache RAID
Sub Size Level
Disk ... (0 Replies)
Discussion started by: enkei17
0 Replies
6. UNIX for Advanced & Expert Users
Hello World:
Recently I ran into an issue where a collegue had installed a Sun T5140 with twin 136GB disks in them. However, he forgot to execute the raidctl command first to mirror c1t0d0 to c1t1d0 boo hoo:) So along I come and try to mirror the disks by booting to sigle user... (1 Reply)
Discussion started by: rambo15
1 Replies
7. Solaris
Setting up a T5240 with two disks c1t0d0 and c1t1d0.
I am trying to use raidctl but when I issue.
raidctl -l
I get
Controller 1
Disk: 0.0.0
Disk: 0.1.0
So I try
raidctl -c '0.0.0 0.1.0' -r 1 1
and I get "Array in use."
I try (4 Replies)
Discussion started by: photon
4 Replies
8. Solaris
At my own eys I can see 4 disks inside of server. Previous admin told me that hardware mirror is done.
What I see with "format" is 2 disks - I suspect that these are 2 MIRRORS.
I just cant be sure because raidctl show this:
# raidctl -l c0t0d0
Volume Size Stripe ... (0 Replies)
Discussion started by: czezz
0 Replies
9. UNIX for Dummies Questions & Answers
I am mirroring a single partition drive with raidctl. The source partition was mounted when I created the mirror with raidctl -c c1t1d0 c1t3d0. The source disk was defined with s2 and s6 only.
I didn't think to umount it first.
Is there a problem with that? (2 Replies)
Discussion started by: csgonan
2 Replies
10. UNIX for Dummies Questions & Answers
I am using raidctl on a v440 disk and noticed it resyncs after every boot, which takes about 30 minutes because of the size of the partition. I am concerned with what happens during the resync if "writes" happen to the disk before it is complete?
Any info would be helpful.
Thanks (0 Replies)
Discussion started by: csgonan
0 Replies
array-info(1) array-info(1)
NAME
array-info - check the status of a HP (Compaq) SmartArray controller
SYNOPSIS
array-info -d array_device_path [-a|-l|-A|-c|-s|-L|-h]
DESCRIPTION
Array-info is a command line tool to retrieve informations and logical drives status from several RAID controllers (currently HP Compaq IDA
and CISS and MD). It displays informations about the firmware version, Rom revision, number of physical and logical drives on the con-
troller, aswell as the fault tolerance, size, number of physical disks and status for each logical drive.
OPTIONS
--device | -d
Path to array device, e.g. /dev/ida/c0d0 or /dev/cciss/c0d1
--all-drives | -a
Show informations about all drives
--logical drive | -l
Show informations about selected logical drive
--show-ctrl | -c
Show informations about controller
--show-logical | -L
Show informations about logical drives
--show-physical | -p
Show physical device informations
--show-status | -s
Show status of logical drives
--show-all | -A
Show all informations
--version | -V
Show version
-h Show help about options
COPYRIGHT
This manual page was written by Raphael Pinson <<raphink@ubuntu.com>>. Permission is granted to copy, distribute and/or modify this docu-
ment under the terms of the GNU General Public License, Version 2 or any later version published by the Free Software Foundation.
2006-12-15 array-info(1)