8 More Discussions You Might Find Interesting
1. AIX
Hi All,
How can I find out which is ETH5 on my AIX P5 system. I have about seven different NIC card on this. I did move the cable to each one but still I was not able to see the link light up when I did netstat -v
Any idea?
Thanks. (2 Replies)
Discussion started by: samnyc
2 Replies
2. Solaris
Hi,
I've recently moved my pci LAN card from Slot2 Slot5 on my sun x4270_m2 server (solaris 10).
I've done the touch / reconfigure and devfsadm, however my issue is that im able to configure the e1000g7 port with an ip address (192.168.0.1) but if i plug my laptop (set with static ip... (7 Replies)
Discussion started by: kerrygold
7 Replies
3. Solaris
Hello all,
I have a problem with my x4270_m2 server. I have a GBE lan built into the back of my server and I have a QGE pci card in slot 2 to be used as a redundant.
My server is not picking up the QGE lan card in slot2. From investigation of the /etc/path_to_inst, which shows:
#grep e1000... (2 Replies)
Discussion started by: kerrygold
2 Replies
4. Linux
I installed PCI Card HP SC44Ge - SAS1068E
on my linux CentOS 5.4
is there a way to find out if the PCI is properly installed and recognized by linux.
lspci is enough?
just to add that PCI card is connected to a tape...
also how can I find out driver and firmware version?
thanks a... (1 Reply)
Discussion started by: karlochacon
1 Replies
5. AIX
Hi everyone, I recently inherited an IBM RS/6000 43P 150, and it appears that the on board ethernet is dead. Can I put in a PCI ethernet card and use that as the default ethernet connection (as opposed to the one on the motherboard)? If so, what type of card can I use and how does one configure... (2 Replies)
Discussion started by: Jwoollard
2 Replies
6. Solaris
Hi,
i have a RealTek Lan Card on my machine. Does Solaris 9 supports this lan card .
Thank You,
Shafi (3 Replies)
Discussion started by: sol8admin
3 Replies
7. Solaris
hello mates,
do you know a manufactor for rs232 serial pci cards for the sparc architecture? it seems that there is no original product from sun for that purpose. strange, isn't it?
problem is that i have a V250 with only one db9 rs232 serial port, and i need it for a modem connection, but i also... (1 Reply)
Discussion started by: pressy
1 Replies
8. SuSE
Hey all, ive got redhat 80 and trying to install a HCF win modem. Ive intsalled the drivers from linuxant.com using the rpm - i packagename.rpm command, but i still cant use the modem
any suggestions ? (3 Replies)
Discussion started by: kiwi_bloke
3 Replies
PCCARDCTL(8) System Manager's Manual PCCARDCTL(8)
NAME
pccardctl - PCMCIA card control utility
lspcmcia - display extended PCMCIA debugging information
SYNOPSIS
pccardctl [-V] [-v ...] command [socket]
lspcmcia [-V] [-v ...] [socket]
DESCRIPTION
pccardctl is used to monitor and control the state of PCMCIA sockets. If a socket number is specified, the command will be applied to just
one socket; otherwise, all sockets will be affected.
If pccardctl is executed by root, all commands are available. If it is executed by an unpriviledged user, only the informational commands
are accessible.
lspcmcia is an alias for pccardctl ls, provided for convenience.
COMMANDS
status
Display the current socket status flags.
config
Display the socket configuration, including power settings, interrupt and I/O window settings, and configuration registers. --not yet
implemented
ident
Display card identification information, including product identification strings, manufacturer ID codes, and function ID codes. Not
yet implemented for cardbus cards. Use lspci instead.
info
Much like the ident command, but its output is formatted as a series of Bourne-stype shell variable definitions for use in scripts.
Not yet implemented for cardbus cards.
ls Display extended debugging information about the PCMCIA sockets and devices present in the system.
suspend
Shut down and then disable power for a socket.
resume
Restore power to a socket, and re-configure for use.
eject
Notify all client drivers that this card will be ejected, then cut power to the socket.
insert
Notify all client drivers that this card has just been inserted.
OPTIONS
-V Show version information and exit.
-v Increase the verbosity of the ls command. Giving this option twice increases verbosity further.
AUTHOR
Daniel Ritz - daniel.ritz@gmx.ch
based upon the original cardctl man page by
David Hinds - dahinds@users.sourceforge.net
pcmciautils 2005/10/22 PCCARDCTL(8)