disable power management to a PCI card

8 More Discussions You Might Find Interesting

1. AIX

AIX -How to find which NIC is on which PCI card

Hi All, How can I find out which is ETH5 on my AIX P5 system. I have about seven different NIC card on this. I did move the cable to each one but still I was not able to see the link light up when I did netstat -v Any idea? Thanks.

2. Solaris

Can't ping new PCI LAN card x4270_m2

Hi, I've recently moved my pci LAN card from Slot2 Slot5 on my sun x4270_m2 server (solaris 10). I've done the touch / reconfigure and devfsadm, however my issue is that im able to configure the e1000g7 port with an ip address (192.168.0.1) but if i plug my laptop (set with static ip...

3. Solaris

Q:x4270_m2 reconfigure PCI card to slot 5?

Hello all, I have a problem with my x4270_m2 server. I have a GBE lan built into the back of my server and I have a QGE pci card in slot 2 to be used as a redundant. My server is not picking up the QGE lan card in slot2. From investigation of the /etc/path_to_inst, which shows: #grep e1000...

4. Linux

PCI Card recognized

I installed PCI Card HP SC44Ge - SAS1068E on my linux CentOS 5.4 is there a way to find out if the PCI is properly installed and recognized by linux. lspci is enough? just to add that PCI card is connected to a tape... also how can I find out driver and firmware version? thanks a...

5. AIX

Add PCI ethernet card?

Hi everyone, I recently inherited an IBM RS/6000 43P 150, and it appears that the on board ethernet is dead. Can I put in a PCI ethernet card and use that as the default ethernet connection (as opposed to the one on the motherboard)? If so, what type of card can I use and how does one configure...

6. Solaris

Does x86 solaris 9 support PCI RealTek Lan Card

Hi, i have a RealTek Lan Card on my machine. Does Solaris 9 supports this lan card . Thank You, Shafi

7. Solaris

rs232 pci-card

hello mates, do you know a manufactor for rs232 serial pci cards for the sparc architecture? it seems that there is no original product from sun for that purpose. strange, isn't it? problem is that i have a V250 with only one db9 rs232 serial port, and i need it for a modem connection, but i also...

8. SuSE

HCF win modem PCI card

Hey all, ive got redhat 80 and trying to install a HCF win modem. Ive intsalled the drivers from linuxant.com using the rpm - i packagename.rpm command, but i still cant use the modem any suggestions ?

LEARN ABOUT REDHAT

cardctl

CARDCTL(8)						      System Manager's Manual							CARDCTL(8)

NAME

       cardctl - PCMCIA card control utility

SYNOPSIS

       cardctl [-V] command [socket]
       cardctl [-c config] [-f scheme] [-s stab] scheme [name]

DESCRIPTION

       Cardctl	is  used to monitor and control the state of PCMCIA sockets.  If a socket number is specified, the command will be applied to just
       one socket; otherwise, all sockets will be affected.

       Cardctl is also used to select between multiple PCMCIA configuration schemes.  The current scheme name  is  passed  to  the  device  option
       scripts as part of the ``device address'', so the scripts can use it to choose between different setups.

       If  cardctl  is	executed by root, all commands are available.  If it is executed by an unpriviledged user, only the informational commands
       are accessible.

       Some commands may not work or give misleading results if cardmgr is not running.

COMMANDS

       status
	   Display the current socket status flags.

       config
	   Display the socket configuration, including power settings, interrupt and I/O window settings, and configuration registers.

       ident
	   Display card identification information, including product identification strings, manufacturer ID codes, and function ID codes.

       suspend
	   Shut down and then disable power for a socket.

       resume
	   Restore power to a socket, and re-configure for use.

       reset
	   Send a reset signal to a socket, subject to approval by any drivers already bound to the socket.

       eject
	   Notify all client drivers that this card will be ejected, then cut power to the socket.

       insert
	   Notify all client drivers that this card has just been inserted.

       scheme
	   If no scheme name is given, cardctl will display the current PCMCIA configuration scheme.  If a scheme  name  is  given,  cardctl  will
	   unconfigure all PCMCIA devices, and reconfigure for the new scheme.

OPTIONS

       -V     Show version information and exit.

       -c config
	      Look for the card configuration database and card configuration scripts in the specified directory, instead of /etc/pcmcia.

       -f scheme
	      Use the specified file to keep track of the current configuration scheme, instead of /var/lib/pcmcia/scheme.

       -s stab
	      Read current socket information from the specified file, instead of /var/lib/pcmcia/stab.

AUTHOR

       David Hinds - dahinds@users.sourceforge.net

SEE ALSO

       cardmgr(8).

pcmcia-cs							2000/12/13 16:50:26							CARDCTL(8)

UNIX for Dummies Questions & Answers