physical and logical disc, mount etc

10 More Discussions You Might Find Interesting

1. AIX

AIX unreadable sector Logical or Physical

Hello Folks, I have got this message: When I contacted support, they said this is logical filesystem error and it has to do with the filesystem. How can I find out ?

2. Linux

Logical Volume to physical disk mapping

When installing Linux, I choose some default setting to use all the disk space. My server has a single internal 250Gb SCSI disk. By default the install appears to have created 3 logical volumes lv_root, lv_home and lv_swap. fdisk -l shows the following lab3.nms:/dev>fdisk -l Disk...

3. UNIX for Dummies Questions & Answers

Confusion Regarding Physical Volume,Volume Group,Logical Volume,Physical partition

Hi, I am new to unix. I am working on Red Hat Linux and side by side on AIX also. After reading the concepts of Storage, I am now really confused regarding the terminologies 1)Physical Volume 2)Volume Group 3)Logical Volume 4)Physical Partition Please help me to understand these concepts.

4. Shell Programming and Scripting

Mount Points vs Physical Drives

Hi there i need a way ( some sort of script maybe) to check if a mont point exist when but the physical drive does not for example if i look in / and see that user_data2 directory exist but there is no user_data2 drive. another hurdle would be that some of the machines have raided drives...

5. Solaris

Why do controllers differ between physical and logical names

When I look at format I can see the following info: AVAILABLE DISK SELECTIONS: 0. c1t0d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424> /pci@1c,600000/scsi@2/sd@0,0 1. c1t1d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424> /pci@1c,600000/scsi@2/sd@1,0 Can anyone tell me...

6. Solaris

Physical and Logical Device Name

Dear all, Please can anybody explain me in detail what is the different between physical device name file and logical device name file. Please explain me clearly it's my request.

7. HP-UX

Unmount and remove all Logical vol.Volume group and physical disk

Hi, Someone please help me with how i can unmount and remove all the files systems from a cluster. This is being shared by two servers that are active_standby.

8. Linux

one nfs mount point for many logical volumes

hi i am wondering if it is possible to use one nfs mount point for several logical volumes. i have a top level directory /imaging with data1 - data50 below it. each dataX directory is a logical volume configured through LVM. if i mount them separately on the client (i.e. 50 lines in fstab...

9. Solaris

File system and disc mount

Hello All Well i m using sun fire and I want to view file system on each disc mount then what will be the commands?...like i want to get each disc like c0t0d0s0 and others and i want to see directories and files distributed on each discs.... with heartiest greetings nilanjan

10. AIX

Physical and Logical IP address

Hi all I need command to give logical and physical IP Address for my machine. thank you

LEARN ABOUT FREEBSD

mcd

MCD(4)							   BSD Kernel Interfaces Manual 						    MCD(4)

NAME

     mcd -- Mitsumi CD-ROM driver

SYNOPSIS

     device mcd

     In /boot/device.hints:
     hint.mcd.0.at="isa"
     hint.mcd.0.port="0x300"
     hint.mcd.0.irq="10"

DESCRIPTION

     The mcd driver provides a data and audio interface to the Mitsumi-brand CD-ROM player.  The CD-ROM player must be interfaced to the ISA bus
     through one of the Mitsumi proprietary controller boards.	The controller boards supported are the LU002S, LU005S, the FX001 and the quite
     common FX001D.

     The mcd driver responds to disk-specific ioctl() commands, namely the DIOCGPART command.  Other disk-specific ioctl() commands will return an
     error.

     The mcd driver also responds to special CD-ROM ioctl() commands.  These commands control the CD-ROM player's audio features.  The commands
     are:

	   CDIOCREADSUBCHANNEL	get sub-channel information on current status of disc playing
	   CDIOCREADTOCHEADER	get table of contents header
	   CDIOCREADTOCENTRYS	gets all of the table of contents
	   CDIOCPLAYTRACKS	begins audio playing at location specified
	   CDIOCPLAYBLOCKS	fails with error EINVAL
	   CDIOCPLAYMSF 	begins audio playing at location specified
	   CDIOCRESUME		resumes playing a previously paused disc
	   CDIOCPAUSE		pauses a playing disc
	   CDIOCSTART		begins playing a disc
	   CDIOCSTOP		stops a previously playing disc
	   CDIOCEJECT		opens the disc tray (there is no support for a corresponding un-eject command).
	   CDIOCRESET		stops any play and resets the Mitsumi controller board
	   CDIOCSETDEBUG	cause the kernel to print debug messages to the console about the mcd driver
	   CDIOCCLRDEBUG	cause the kernel to quit printing debug messages about the mcd driver

     The ioctl() commands defined above are the only ones that the mcd driver supports.  There are other CD-ROM related ioctl() commands (such as
     CDIOCSETVOL and CDIOCSETSTERIO) which are available and may be supported by future versions of the driver.

FILES

     /dev/(r)mcd0a  accesses BSD partition on the disc.  Normally, there is only one file system on a CD-ROM disc.
     /dev/(r)mcd0c  accesses raw device.

NOTES

     The character-mode devices for the mcd driver should only be used for accessing the audio features of the CD-ROM player as the performance on
     data is abysmal.

     The current version of the driver uses neither the DMA or IRQ features of the interface board, although it has an interrupt handler for any
     IRQ requests that are generated.  Until the DMA features are supported, the only interrupts that the board generates are those that are not
     supported by the driver anyway.

SEE ALSO

     <sys/cdio.h>

HISTORY

     An mcd driver appeared in FreeBSD 1.0.

AUTHORS

     The driver was written by Holger Veit (data part) and Brian Moore (audio part).  Changes were provided by Gary Clark II, Andrew A. Chernov,
     and Jordan K. Hubbard.

BSD
								 December 8, 1994							       BSD

UNIX for Dummies Questions & Answers