how to share printer installed on windows 2000 with SCO OpenServer 5.0.5
i have wipro netpower server with p4 and 256 ram.
i want share dot matrix printer installed on windows 2000 prof.
with sco openserver 5.0.5. plz help me to comeout from this trouble.
Hi! All,
I am trying to mount a NFS share on my FreeNAS system onto my SCO OpenServer 5.0.6. I get the following error:
mount: cannot mount /: Connection Refused (error 115)
Has anyone been able to do this? (3 Replies)
I only know enough about Unix to get me in trouble:
I have an old UNIX SCO OpenServer 5 that I am phasing out. It had been connected to an HP laserjet via a serial port connection. As part of the phase out I disconnected and removed the workstations leaving only the server. I didn't think I... (9 Replies)
hi,
what is the exact procedure to to set up printer on linux machine?The printer is a network hp 3050 printer configured on windows xp machine and i want to setup it on linux fc9 machine to print from it.is samba is compulsory for that?
please give the exact procedure to do the same? (1 Reply)
I connected a serial printer to my scoOpenServer which works great. I was able to disable the banner in the interface of the printer. However i am unable to find the command in the interface to disable the formfeed . Below is a copy of the interface file. Please can anyone instruct me on how to... (0 Replies)
Hi, I have done this year ago, and now I need to do it again, but did not remember how I do it. I have a slip printer on a windows xp workstation and i need to print from SCO unix application to that printer. I try to create a remote printer but the only option available is unix, the other to... (0 Replies)
Telnet connection to SCO Unixware server taking longer to
return the Login prompt !!!
Thanx in advance for any suggestions or help in this regard .
Cheers
KBiswas (9 Replies)
I connected my windows 2k professional to sco openserver. i want to know how i should setup sco , so when i login from windows it will log me into my home dir on sco (1 Reply)
Hi,
i have 4 Unix Sco openservers, 4PCs running windows 2000, and 1 PC with windows server which i want to configure in the same network.
During the configuration procedure, the wizard of Windows 2000 SERVER ask you if this is the only server in the network, now it will be the only WINDOWS... (2 Replies)
cupsaddsmb(8) Apple Inc. cupsaddsmb(8)NAME
cupsaddsmb - export printers to samba for windows clients
SYNOPSIS
cupsaddsmb [ -H samba-server ] [ -U samba-user[%samba-password] ] [ -h cups-server[:port] ] [ -v ] -a
cupsaddsmb [ -H samba-server ] [ -U samba-user[%samba-password] ] [ -h cups-server[:port] ] [ -v ] printer [ ... printer ]
DESCRIPTION
cupsaddsmb exports printers to the SAMBA software (version 2.2.0 or higher) for use with Windows clients. Depending on the SAMBA configura-
tion, you may need to provide a password to export the printers. This program requires the Windows printer driver files described below.
OPTIONS
cupsaddsmb supports the following options:
-H samba-server
Specifies the SAMBA server which defaults to the CUPS server.
-U samba-user[%samba-password]
Specifies the SAMBA print admin username which defaults to your current username. If the username contains a percent (%) character,
then the text following the percent is treated as the SAMBA password to use.
-a
Exports all known printers. Otherwise only the named printers are exported.
-h cups-server[:port]
Specifies a different CUPS server to use.
-v
Specifies that verbose information should be shown. This is useful for debugging SAMBA configuration problems.
SAMBA CONFIGURATION
cupsaddsmb uses the new RPC-based printing support in SAMBA 2.2.x to provide printer drivers and PPD files to Windows client machines. In
order to use this functionality, you must first configure the SAMBA smb.conf(5) file to support printing through CUPS and provide a printer
driver download share, as follows:
[global]
load printers = yes
printing = cups
printcap name = cups
[printers]
comment = All Printers
path = /var/spool/samba
browseable = no
public = yes
guest ok = yes
writable = no
printable = yes
[print$]
comment = Printer Drivers
path = /etc/samba/drivers
browseable = yes
guest ok = no
read only = yes
write list = root
This configuration assumes a FHS-compliant installation of SAMBA; adjust the [printers] and [print$] share paths accordingly on your system
as needed.
MICROSOFT POSTSCRIPT DRIVERS FOR WINDOWS
The base driver for Windows 2000 and higher is the Microsoft PostScript driver, which is available on any system running Windows 2000 or
higher in the %WINDIR%SYSTEM32SPOOLDRIVERSW32X863 folder for 32-bit drivers and %WINDIR%SYSTEM32SPOOLDRIVERSX643 folder for
64-bit drivers.
The CUPS printer driver is preferred over the Microsoft driver since it supports the page-label, job-billing, and job-hold-until options
fully on all printers. However, currently only Windows 2000 and higher is supported by the Microsoft driver, so you will also need to get
the Adobe driver to support Windows 95, 98, and Me clients. The Adobe and Microsoft drivers for Windows 2000 are identical.
Once you have extracted the driver files, copy the 32-bit drivers to the /usr/share/cups/drivers directory and the 64-bit drivers to the
/usr/share/cups/drivers/x64 directory exactly as named below:
[Windows 2000 and higher]
ps5ui.dll
pscript.hlp
pscript.ntf
pscript5.dll
Note: Unlike Windows, case is significant - make sure that you use the lowercase filenames shown above, otherwise cupsaddsmb will fail to
export the drivers.
CUPS POSTSCRIPT DRIVERS FOR WINDOWS
cupsaddsmb can use the CUPS v6 PostScript printer driver for Windows, which is available for download from the CUPS web site.
The CUPS printer driver is preferred over the Adobe and Microsoft drivers since it supports the page-label, job-billing, and job-hold-until
options fully on all printers. However, currently only Windows 2000 and higher is supported by the CUPS driver, so you will also need to
get the Adobe driver to support Windows 95, 98, and Me clients.
Once you have extracted the driver files, copy the 32-bit drivers to the /usr/share/cups/drivers directory and the 64-bit drivers to the
/usr/share/cups/drivers/x64 directory exactly as named below:
[Windows 2000 and higher]
cups6.inf (from www.cups.org)
cups6.ini (from www.cups.org)
cupsps6.dll (from www.cups.org)
cupsui6.dll (from www.cups.org)
ps5ui.dll (from your Windows system)
pscript.hlp (from your Windows system)
pscript.ntf (from your Windows system)
pscript5.dll (from your Windows system)
Note: Unlike Windows, case is significant - make sure that you use the lowercase filenames shown above, otherwise cupsaddsmb will fail to
export the drivers.
ADOBE POSTSCRIPT DRIVERS FOR WINDOWS 95, 98, AND ME
cupsaddsmb can use the Adobe PostScript printer driver for Windows 95, 98, and ME, which are available for download from the Adobe web site
(http://www.adobe.com).
The Adobe driver does not support the page-label, job-billing, or job-hold-until options.
Once you have installed the driver on a Windows system, copy the following files to the /usr/share/cups/drivers directory exactly as named
below:
[Windows 95, 98, and Me]
ADFONTS.MFM
ADOBEPS4.DRV
ADOBEPS4.HLP
ICONLIB.DLL
PSMON.DLL
Note: Unlike Windows, case is significant - make sure that you use the UPPERCASE filenames shown above, otherwise cupsaddsmb will fail to
export the drivers.
KNOWN ISSUES
Getting the full set of Windows driver files should be easier.
SEE ALSO smbd(8), smb.conf(5), http://localhost:631/help
http://www.cups.org/windows/
COPYRIGHT
Copyright 2007-2011 by Apple Inc.
25 July 2007 CUPS cupsaddsmb(8)