Storport and SCSI port

9 More Discussions You Might Find Interesting

1. UNIX for Beginners Questions & Answers

Bash script, find the next closed (not in use) port from some port range.

hi, i would like to create a bash script that check which port in my Linux server are closed (not in use) from a specific range, port range (3000-3010). the print output need to be only 1 port, and it will be nice if the output will be saved as a variable or in same file. my code is: ...

2. Shell Programming and Scripting

Help Generate new port base on the last port but not in used by other application

Hi Expert, Anybody can figure it out on how to generate new port base on my last port let say my last port var1=124 and increment for new port 125,126 but this new two ports need to look at first if this port is not in used by any service, if the port is in used add 1 to new port and if in used...

3. Solaris

How to find port number wwn of particular port on dual port HBA,?

please find the below o/p for your reference bash-3.00# fcinfo hba-port HBA Port WWN: 21000024ff295a34 OS Device Name: /dev/cfg/c2 Manufacturer: QLogic Corp. Model: 375-3356-02 Firmware Version: 05.03.02 FCode/BIOS Version: BIOS: 2.02; fcode: 2.01;...

4. Solaris

Cabling and adapters to communicate to service processor serial port from Windows PC with USB port.

Hello, I have an unloaded T5140 machine and want to access the ILOM for the first time and subsequently the network port after that., and then load Solaris 10 the final January 2011 build. The first part is what confuses me -the cabling. I am coming from a Windows machine (w/appropriate...

5. IP Networking

Tcp ip port open but no such process (merged: Release A Port)

i want to kill a tcp connection by killing its pid with netstat -an i got the tcp ip connection on port 5914 but when i type ps -a or ps-e there is not such process running on port 5914 is it possible that because i do not log on with proper user account i can not see that process running?

6. IP Networking

telnet for port 5433 is not working while it works for port 22

Hi, I am trying to set up a dev environment and I have Ubuntu server (10.16.1.92) and a CentOS VM (10.16.3.235) on this. On the CentOS I have a program running on port 5433. Now my problem is that I am unable to telnet this port from another Windows server whereas I can telnet port 22 from...

7. Solaris

How to enable Serial port on ILOM, when Network Port is enabled in parallel

Hi Everyone, In my environment, I have few T5220. On the iLOM Management Card, I have both Network and Serial port are cabled, I don't have any issues while I try to connect using Network Management port, but when I try to connect the serial port for the same server which is actually connected...

8. IP Networking

SSH Port Forwarding - sharing the same port

Hi Linux/Unix Guru, I am setting Linux Hopping Station to another different servers. My current config to connect to another servers is using different port to connect. e.g ssh -D 1080 -p 22 username@server1.com ssh -D 1081 -p 22 username@server2.com Now what I would like to have...

9. Solaris

luxadm -e port shows one port not connected

hi i have a sun machine which has one hba 2ports; out of which one port says it is not connected # luxadm -e port /devices/pci@1d,700000/SUNW,qlc@1/fp@0,0:devctl CONNECTED /devices/pci@1d,700000/SUNW,qlc@1,1/fp@0,0:devctl NOT CONNECTED but both...

LEARN ABOUT OPENSOLARIS

ses

ses(7D) 							      Devices								   ses(7D)

NAME

       ses - SCSI enclosure services device driver

SYNOPSIS

       ses@target,lun

DESCRIPTION

       The   ses  device  driver is an interface to SCSI enclosure services devices. These devices sense and monitor the physical conditions in an
       enclosure as well as allow access to the status reporting and configuration features of the enclosure (such as indicator LEDs on the enclo-
       sure.)

       ioctl(9E) calls may be issued to ses to determine the state of the enclosure and to set parameters on the enclosure services device.

       No ses driver properties are defined. Use the ses.conf file to configure the ses driver.

EXAMPLES

       Example 1 ses.conf File Format

       The following is an example of the ses.conf file format:

	 #
	 # Copyright (c) 1996, by Sun Microsystems, Inc.
	 # All rights reserved.
	 #
	 #
	 #ident "@(#)ses.conf 1.1    97/02/10 SMI"
	 #

	 name="ses" parent="sf"
	       target=15;

	 name="ses" parent="SUNW,pln" port=0 target=15;
	 name="ses" parent="SUNW,pln" port=1 target=15;
	 name="ses" parent="SUNW,pln" port=2 target=15;
	 name="ses" parent="SUNW,pln" port=3 target=15;
	 name="ses" parent="SUNW,pln" port=4 target=15;
	 name="ses" parent="SUNW,pln" port=5 target=15;

	 name="ses" class="scsi"
	       target=15 lun=0;

IOCTLS

       The  SES  driver currently supports the SES, SAFTE and SEN enclosure service chipsets. SEN and SAFTE protocols are translated internally in
       the driver into SES compliant data structures. This enables the SES driver to work seamlessly with  different protocols and eliminates  the
       need to enhance user applications.

       SESIOC_GETNOBJ	    Returns an unsigned integer that represents the number of SES data structures in the enclosure services chip.

       SESIOC_GETOBJMAP     Returns  a	size  array containing ses_object elements communicated through SESIOC_GETNOBJ(). ses_object is defined in
			    sesio.h.

       SESIOC_INIT	    Instructs the device to perform a self-diagnostic test. Currently SES & SEN devices always return success.

       SESIOC_GETENCSTAT    Returns an unsigned character that represents status enclosure as defined by Table 25 in  Section  7.1.2  of  the  SES
			    specification NCITS 305-199x.

       SESIOC_GETOBJSTAT    This ioctl is passed an ses_objarg containing the obj_id you want to set, then fills in the remaining fields according
			    to element status page of the SES specification.

       SESIOC_SETOBJSTAT    Sets options in the control field. You set control field options by filling out all fields in ses_objarg. Field  defi-
			    nitions are presented in Section 7.2.2 of the SES specification.

FILES

       /kernel/drv/ses.conf    Driver configuration file

ATTRIBUTES

       See attributes(5) for descriptions of the following attributes:

       +-----------------------------+-----------------------------+
       |      ATTRIBUTE TYPE	     |	    ATTRIBUTE VALUE	   |
       +-----------------------------+-----------------------------+
       |Architecture		     |SPARC			   |
       +-----------------------------+-----------------------------+

SEE ALSO

       driver.conf(4), scsi(4), attributes(5), esp(7D), isp(7D), ioctl(9E)

SunOS 5.11							    27 May 2008 							   ses(7D)

UNIX for Dummies Questions & Answers