SCO OS5 Boot up stops

10 More Discussions You Might Find Interesting

1. UNIX for Beginners Questions & Answers

IBM eServer X 335 stops boot process at Server splash screen

Hi there. I used to use linux a lot a number of years ago but it has been quite a while so ?I really consider myself a beginner again. I have an old IBM eServer X Series 335 machine and I want to get it back up and running for a number of reasons. I knew that one of the SCSI drives was bad and...

2. UNIX for Beginners Questions & Answers

SCO OpenServer 5 Will Not Boot

We have a legacy system that runs on SCO OpenServer 5.0.6, and I've rebuilt the server a couple of times so we can have access to old historical data. That system suddenly went offline for no known reason, and I know that the configuration has not been altered, there is nobody with access to the...

3. SCO

Sco UNIX 5.0.6 not boot

hi i have image SCo Unix 5.0.6 and I want transfer on my HP ML350 G5 after Transfer show this message : boot not found cannot open stage 1 boot failure: error loading hd (40)/boot this hp server used smart array E200i and P400 and sco not recognized HDD tanks

4. SCO

SCO Will Not Boot

Hello to all , I am new to this forum and also i have very less knowledge about sco unix, but I have good knowlage about Dos-Windows file systems since 1990 year :) and i am a professional IT person about Networking and computer hardware but as i said not know much about Unix based systems :( ,...

5. HP-UX

HP-UX stops on boot; DIAGNOSTIC SYSTEM WARNING

Hi all, I have an HP-UX server that halts during boot. Below is CO output. Any ideas how to solve this? Any help would be appreciated. Thank you. HP-UX Boot Loader for IPF -- Revision 2.027 Press Any Key to interrupt Autoboot \EFI\HPUX\AUTO ==> boot vmunix -lq Seconds left till...

6. SCO

Want to set up SNMP with MIB on SCO OS5

Want to setup snmp with mib to track system issues on SCO OS5.0.5. Is there somewhere I can look that will give me insight in how to answer some of the questions the mkdev snmp asks?

7. UNIX for Advanced & Expert Users

Error during Sco Unix boot

Hi friends, i am getting the following error while booting my system which has SCo UNIX . ========================= H iinit PANIC: srmountfun-Error 22 mounting of rootdev hd(1/42) cannot dump 40863 pages to dempdev hd(1/41) : Space for only 0 pages. Dump not completed. safe to power off...

8. UNIX for Dummies Questions & Answers

boot failure SCO 5.0.6 OpenServer

hello guys. I just installed SCO 5.0.6 OpenServer it went all the way to the end of the installation and the first boot try it gave me this message. not a directory boot not found cannot open stage 1 boot failure: error loading hd (40)/boot

9. UNIX for Dummies Questions & Answers

SCO os5 xwindow

I acciedentaly terminated the x window session on my sco os5 machine. Can somone help me get it going again with out rebooting? Another ? Does anyone know where I can get the VNC version for SCO or can some one help me make changes to the RH version to work for SCO OS5. Thanks.

10. UNIX for Dummies Questions & Answers

Making boot disks in SCO

This last monday the inittab file became corrupted and the server refused to start... A set of boot / root disks made from another SCO server saved the day.. Anyway, I would like to make a set from the production server just so I have a set created from that machine. The command I would be using is...

LEARN ABOUT LINUX

mkfs.bfs

MKFS.BFS(8)						Linux System Administrator's Manual					       MKFS.BFS(8)

NAME

       mkfs.bfs - make an SCO bfs filesystem

SYNOPSIS

       mkfs.bfs [-N nr-of-inodes] [-V volume-name] [-F fsname] device [size-in-blocks]

DESCRIPTION

       mkfs.bfs creates an SCO bfs file-system on a block device (usually a disk partition or a file accessed via the loop device).

       The  size-in-blocks  parameter  is  the	desired size of the file system, in blocks.  If nothing is specified, the entire partition will be
       used.

OPTIONS

       -N     Specify the desired number of inodes (at most 512).  If nothing is specified some default number	in  the  range	48-512	is  picked
	      depending on the size of the partition.

       -V volume-label
	      Specify the volume label. I have no idea if/where this is used.

       -F fsname
	      Specify the fsname. I have no idea if/where this is used.

       -v     Be verbose.

EXIT CODES

       The exit code returned by mkfs.bfs is 0 when all went well, and 1 when something went wrong.

SEE ALSO

       mkfs(8).

AVAILABILITY

       The mkfs.bfs command is part of the util-linux package and is available from ftp://ftp.kernel.org/pub/linux/utils/util-linux/.

Util-linux 2.9x 						   12 Sept 1999 						       MKFS.BFS(8)

UNIX for Dummies Questions & Answers