Solaris 10 missing static

Solaris 10 missing static_routes file

10 More Discussions You Might Find Interesting

1. Solaris

Missing ASM Disks in Solaris 11.3 LDOM

Hi Guys, Just a quick question hopefully someone will have seen this before and will be able to enlighten me. I have been doing some Infrastructure Verification Testing and one of the tests was booting the primary domain from alternate disks, this all went well - however on restarting one of...

2. Solaris

Ksyms missing in Solaris

Hi, On solaris-10 server, this file is missing, which is causing another issue. Can somebody guide, how to fix this ? This is tough server to take downtime, uptime of 3 years. I am thinking, is there anything, which I can do without reconfiguration reboot. devfsadm didn't helped bash-3.2# ls -l...

3. Solaris

Solaris 10 Installation - Disks missing, and Raid

Hey everyone. First, let me start by saying I'm primarily focused on linux boxes, and just happened to get pulled into building two T5220's. I'm not super educated on sun boxes. Both T5220's have 8 146GB 15k SAS drives. Inside the service processor, I can run SHOW /SYS/HDD{0-7} and they all come...

4. Solaris

Solaris 10 missing /cdrom/cdrom0/

Good day everyone, I am trying to install some new senmail patch on my Solaris 10 system. I know the cdrom for my CP3260 blade servers in my rack worked for the last patches installed. However, when I went to copy from the .tar file from the cdrom to the /tmp. I received an error cannot...

5. Solaris

dvd/cdrom missing after solaris 10 jumpstart

Hi everybody Having a strange problem on a x4270m2 Sun server. Jumpstarting it from dvd drive. After install the dvddrive does not exist. Be aware jumpstart is custommade bash-3.00# mount -F hsfs -o ro /dev/dsk/c1t4d0p0 /cdrom mount: No such device mount: cannot mount...

6. Solaris

Missing ufsboot file(Solaris 10 Sparc)

After installing the latest Oracle CPU patch(October), my V440 system will not boot. I've attempted serveral fixes, including one that say the ufsboot file(we don't use ZFS) may be corrupt so it should be replaced. I cannot find it on the installation DVD or the any of my systems(including...

7. Solaris

<sys/ptrace.h> missing in Solaris 10

Does anyone know why this system include is not there. What can I install to get this and why is it missing?

8. Solaris

pkgadd missing on Solaris 11

Hi, This is not a question thread, but rather a solution to an issue I have encountered on Solaris 11. It turns out that pkgadd is not available by default on Solaris 11. The solution is to install it with: pkg install SUNWpkgcmdsI hope this will save people some time. Cheers, ...

9. Solaris

Compile errors on Solaris 10 (missing libwrap)

I'm trying to compile tacacs+-F4.0.4.18 on Solaris 10 (sparc based server). It fails during the "./configure" phase with the following error: checking whether to use libwrap... yes configure: error: Could not find libwrap. You must first install tcp_wrappers. I do a have tcpwrappers...

10. UNIX for Advanced & Expert Users

Solaris 8 - SUNWcsr cluster missing/corrupt ?

Hi all I'm currently trying to install OpenSSH on a number of servers and for the most part succeeding. Unfortunately one of the Sun V880 servers is complaining when I try to install the /dev/random (entropy) patch (112438-01) needed for the SSH keys. Error below.... (ignore 'the patch has...

LEARN ABOUT NETBSD

route.conf

ROUTE.CONF(5)						      BSD File Formats Manual						     ROUTE.CONF(5)

NAME

     route.conf -- static routes config file

DESCRIPTION

     The route.conf file is read by the staticroute rc.d script during system start-up and shutdown, and is intended for adding and removing
     static routes.

   FILE FORMAT
     Lines starting with a hash ('#') are comments and ignored.  Lines starting with a plus sign ('+') are run during start-up, while lines start-
     ing with a minus sign ('-') are run during system shutdown.  If a line starts with a '!', the rest of the line will get evaluated as a shell
     script fragment.  All other lines are passed to route(8).	During start-up, they are passed behind a ``route add -'' command and during shut-
     down behind a ``route delete -'' command.

FILES

     /etc/route.conf	 The route.conf file resides in /etc.

     /etc/rc.d/staticroute
			 rc.d(8) script that parses route.conf.

EXAMPLES

     In this example, the interface for the desired routing changes is set, the IP address on that interface is determined, and a route is added
     during startup, or deleted during system shutdown.

	   # Set interface and determine current IP address for added route.
	   !ifname=bnx0
	   !ipaddr=$(/sbin/ifconfig ${ifname} | awk '$1 == "inet" {print $2}')
	   net 10.10.1 -interface ${ipaddr}

     In this example, IP forwarding is turned on during start-up, and a static route added for 192.168.2.0.  During system shutdown, the route is
     removed and IP forwarding turned off.

	   # Turn on/off IP forwarding.
	   +sysctl -w net.inet.ip.forwarding=1
	   -sysctl -w net.inet.ip.forwarding=0
	   net 192.168.2.0 -netmask 255.255.255.0 192.168.150.2

SEE ALSO

     rc.conf(5), rc(8), route(8)

BSD
								    May 1, 2012 							       BSD

UNIX for Dummies Questions & Answers