Hi there,
I tried just open a port but I failed ;-(
# telnet localhost 9876
That should work so I did ...
# vi /etc/services
myport 9876/tcp # my port
# svcadm restart inetd
-> New pid, see ps - ef | grep inet
# netstat -an | grep 9876
No port 9876 is waiting ;(
#... (4 Replies)
i want to kill a tcp connection by killing its pid
with netstat -an i got the tcp ip connection on port 5914
but when i type ps -a or ps-e there is not such process running on port 5914
is it possible that because i do not log on with proper user account i can not see that process running? (30 Replies)
Hi,
What iptables command do I need to run in order to open up the following port for incomming traffic on the following server:
# telnet 127.0.0.1 1521
Trying 127.0.0.1...
telnet: connect to address 127.0.0.1: Connection refused
telnet: Unable to connect to remote host: Connection... (3 Replies)
Hi. I ran nmap on my server, and I get the following:
Starting Nmap 4.76 ( http://nmap.org ) at 2009-03-19 16:33 EDT
Interesting ports on -------- (-----):
Not shown: 997 closed ports
PORT STATE SERVICE
22/tcp open ssh
80/tcp open http
6881/tcp open bittorrent-tracker
The... (0 Replies)
Hi Guys,
i am trying to open a port in AIX.
but i am not able to get the command for this. AIX is not having the iptables file present.
So please any body can tell me how to open a port in AIX...
Thanks
sanju (2 Replies)
hi all,
My OS is solaris 8 with core system installation only. so far everything works fine. by i do some testing from my xp pc as client to nmap and scan opening port to my solaris. the result as below:
Initiating SYN Stealth Scan against 10.10.10.10 at 16:25
Discovered open port 21/tcp on... (3 Replies)
IEEE1284_OPEN(3) Functions IEEE1284_OPEN(3)NAME
ieee1284_open - open a port
SYNOPSIS
#include <ieee1284.h>
int ieee1284_open(struct parport *port, int flags, int *capabilities);
DESCRIPTION
In order to begin using a port it must be opened. Any initial set-up of the port is done at this stage. When an open port is no longer
needed it should be closed with ieee1284_close(3).
The possible flags are:
F1284_EXCL
This device cannot share the port with any other device. If this is the case it must be declared at this stage, so that other drivers
trying to access the port know not to bother; otherwise they will wait until this driver releases the port, i.e. never.
The iopl/dev-port access methods don't support this yet, but the ppdev ones do.
If capabilities is not NULL it must point to storage for an int, which will be treated as a set of flags, one per bit, which the library
sets or clears as appropriate. If a capability is present it will be used when asked for. They are:
CAP1284_RAW
Pin-level access is available. If this capability is present then the following functions are effective: ieee1284_write_data,
ieee1284_read_status, ieee1284_wait_status, ieee1284_write_control, ieee1284_read_control, ieee1284_frob_control.
CAP1284_NIBBLE
There is an implementation of nibble mode for this port.
CAP1284_BYTE
There is an implementation of byte mode for this port.
CAP1284_COMPAT
There is an implementation of compatibility mode for this port.
CAP1284_ECP
There is a hardware implementation of ECP mode for this port.
CAP1284_ECPRLE
There is an RLE-aware implementation of ECP mode for this port (the F1284_RLE flag is recognised by the ECP transfer functions).
CAP1284_ECPSWE
There is a software implementation of ECP mode for this port.
CAP1284_BECP
There is an implementation of bounded ECP mode for this port.
CAP1284_EPP
There is a hardware implementation of EPP mode for this port.
CAP1284_EPPSWE
There is a software implementation of EPP mode for this port.
CAP1284_IRQ
An interrupt line is configured for this port and interrupt notifications can be received using ieee1284_get_irq_fd(3).
CAP1284_DMA
A DMA channel is configured for this port.
RETURN VALUE
E1284_OK
The port is now opened.
E1284_INIT
There was a problem during port initialization. This could be because another driver has opened the port exclusively, or some other
reason.
E1284_NOMEM
There is not enough memory.
E1284_NOTAVAIL
One or more of the supplied flags is not supported by this type of port.
E1284_INVALIDPORT
The port parameter is invalid (for instance, the port may already be open).
E1284_SYS
There was a problem at the operating system level. The global variable errno has been set appropriately.
SEE ALSO ieee1284_close(3)AUTHOR
Tim Waugh <twaugh@redhat.com>
Author.
COPYRIGHT
Copyright (C) 2001-2003 Tim Waugh
09/18/2007 IEEE1284_OPEN(3)