Notice: STP:SCSI tape 0 device 46/0 offline

10 More Discussions You Might Find Interesting

1. HP-UX

Failed to open tape device /dev/rmt/0mn:Device busy (errno = 16)

Hi, Unable to make tape backup, please help. /opt/ignite/bin/make_tape_recovery -a /dev/rmt/?mn -I -v -m tar -x inc_entire=vg00 * Creating local directories for configuration files and archive. ======= 04/25/16 16:28:08 IST Started /opt/ignite/bin/make_tape_recovery. (Mon...

2. SCO

No stp SCSI devices configured (unit 0 missing)

Hi I've done migration of my SCO 5.0.6 from SCSI to IDE hard disk and now I'm getting in X windows this message: CONFIG: No Stp SCSI devices configured (unit 0 missing) Howto configure to get this message away?

3. UNIX for Advanced & Expert Users

how to find any device online/offline

what is the command for checking which device active and which is not active

4. SCO

SCSI tape on Openserver 5.0.6

Running into an interesting problem here: I can add the tape with "mkdev tape" the system appears to see it wwith "hwconfig -hc" however a 'tape status /dev/rStp0' says 'no device found', checked the configuration files in 'etc' all appear to be correct. Any suggestion appreciated Jim

5. UNIX for Dummies Questions & Answers

Notice Stp:SCSI tape 0 device 46/0 offline

My computer which uses scoUNIX, has an internal scsi tape backup. It will no longer backup . It posts this message Notice :Stp tape 0 device 46/0 offline. This has been discussed before by the forum and I'd appreciate any help that any expert could provide for me for a step wise approach to...

6. UNIX for Advanced & Expert Users

NOTICE: Stp: SCSI tape 0 device 46/0 not ready

If somebody solve this error please help! Thanks in advance!

7. UNIX for Advanced & Expert Users

NOTICE: Stp: SCSI tape 0 device 46/0 offline

:( If anyone has solved this problem, please help me! Thanks in advance!

8. UNIX for Dummies Questions & Answers

SCSI Tape Error

When I am trying to read any tape I getthe following message on my screen: "stp: Error on SCSI tape=0 (ha=0 id=6 lun=0)" Does anybody know how to solve this problem and what the message means. I already have rebooted the server and cleaned the heads of the tape unit. HELP!!!!

9. UNIX for Dummies Questions & Answers

Scsi tape drive.

I'm running SCO OS 505 on a Compaq proliant 1600, and my tape drive will just not work. It was working properly and whent to Sh?ts when I tried to get the cd rom working. I have uninstalled any configured tape drive and rebooted and then configured a tape drive and rebooted still nothing. I'm...

10. UNIX for Dummies Questions & Answers

Scsi Tape Message?????

I do daily backups running a shell script. I use 6 different tapes for each day (monday through saturday). First of all I insert the tape then run the script and when it finished I eject the tape. Until today I was doing this with no problem, but now I'm getting this message constantly (even...

LEARN ABOUT HPUX

st

st(1M)																	    st(1M)

NAME

       st - shared tape administration

SYNOPSIS

       device_file

DESCRIPTION

       The  command  provides  users  with a command-line interface to check the status of a shared tape device or to reclaim a shared tape device
       from a host system that has failed while holding a reservation on the shared tape device.  The command can also be used for the	same  pur-
       pose on shared library robotic devices.	To use the command you must have root user id.

       Please see examples below for usage.

   Options
       recognizes the following options and arguments:

       Specifies the tape device file or sctl/esctl pass-through device
		      file for the shared tape/library device. This parameter is mandatory and will report an error if device_file is omitted.

       Allows the user to reclaim a shared tape device or shared
		      library robotic device in the case where a host failed while holding a reservation on the shared device.	This option causes
		      a bus device reset to be issued to the device specified by the option.

       Prints out the current status of the shared tape/library
		      device specified by the option.

RETURN VALUE

       returns 0 upon successful completion and 1 otherwise.

EXAMPLES

       The following shows three examples of output from the above command.

       The above output indicates that the shared device is reserved by another host and is therefore unavailable at this time.

       The above output indicates that the shared device is not ready for use at this time.

       The above output indicates that the shared device is ready for use at this time.

       To reclaim a shared tape/library device from a failed host, the following command can be used:

WARNINGS

       The option must be used with care. When reclaiming devices, it must be ensured that the host from which the device is being  reclaimed  has
       in fact failed, as data may be lost as the result of reclaiming a device that is currently in use by another host.

AUTHOR

       was developed by Hewlett-Packard.

SEE ALSO

       mt(1), scsi(7), scsi_ctl(7).

																	    st(1M)

UNIX for Advanced & Expert Users