Hello,
I want to delete a RAID configuration an old server has.
Since i haven't the chance to work with the specific raid controller in the past can you please help me how to perform the configuraiton?
I downloaded IBM ServeRAID Support CD but i wasn't able to configure the video card so i... (0 Replies)
Server Model: T5120 with 146G x4 disks.
OS: Solaris 10 - installed on c1t0d0.
Plan to use software raid (veritas volume mgr) on c1t2d0 disk.
After format and label the disk, still not able to detect using vxdiskadm.
Question:
Should I remove the hardware raid on c1t2d0 first?
My... (4 Replies)
Hello,
I have a scsi pci x raid controller card on which I had created a disk array of 3 disks
when I type lspv ; I used to see 3 physical disks ( two local disks and one raid 5 disk )
suddenly the raid 5 disk array disappeared ; so the hardware engineer thought the problem was with SCSI... (0 Replies)
This server had an HP C1555 tape drive that appears to have gone belly up. We found a replacement, an HP C1537, that we want to install. We did the hardware thing, with power off, of course, but when the box was rebooted it did not seem to recognize the drive. At least the backup software did... (4 Replies)
I tried to install SCO Open Server on HP2000 U3
drivers is amrid,
at install of SCO unnix only recognize non hot plugged devices
I have 2 HD of 40 GO under ID 0 and 1 but unix does not see them at boot ?? (1 Reply)
Hi,
I have a SCO Openserver 5.0.5 server running RAID5 on the hp NETRAID-1M controller and it works just fine.
However, I cannot add a tape drive in. The standard SCSI card is a Symbios and I am using the 'slha' driver, but the system doesnt see the adaptor at SCO startup. The adaptor and... (1 Reply)
Over the past few weeks i've installed Red Hat 7.1 on an HP LPR Netserver and everytime i've installed it, I get errors on the drives and it keeps having me run the fsck command and i suspect that its the scsi drivers, everytime you reboot it gets worse and eventually will no longer boot. I've... (3 Replies)
mega_sas(7D) Devices mega_sas(7D)NAME
mega_sas - SCSI HBA driver for LSI MegaRAID SAS controller
DESCRIPTION
The mega_sas MegaRAID controller host bus adapter driver is a SCSA-compliant nexus driver that supports the Dell PERC 5/E, 5/i, 6/E and
6/i RAID controllers, the IBM ServeRAID-MR10k SAS/SATA controller and the LSI MegaRAID SAS/SATA 8308ELP, 8344ELP, 84016E, 8408ELP,
8480ELP, 8704ELP, 8704EM2, 8708ELP, 8708EM2, 8880EM2 and 8888ELP series of controllers.
Supported RAID features include RAID levels 0, 1, 5, and 6, RAID spans 10, 50 and 60, online capacity expansion (OCE), online RAID level
migration (RLM), auto resume after loss of system power during arrays, array rebuild or reconstruction (RLM) and configurable stripe size
up to 1MB. Additional supported RAID features include check consistency for background data integrity, patrol read for media scanning and
repairing, 64 logical drive support, up to 64TB LUN support, automatic rebuild and global and dedicated hot spare support.
CONFIGURATION
The mega_sas.conf file contains no user configurable parameters. Please configure your hardware through the related BIOS utility or the
MegaCli configuration utility. If you want to install to a drive attached to a mega_sas HBA, you should create the virtual drive first
from the BIOS before running the Solaris install. You can obtain the MegaCli utility from the LSI website.
The mega_sas device can support up to 64 virtual disks. Note that BIOS numbers the virtual disks as 1 through 64, however in the Solaris
operating environment virtual disks are numbered from 0 to 63. Also note that SAS and SATA drives cannot be configured into the same vir-
tual disk.
KNOWN PROBLEMS AND LIMITATIONS
The mega_sas driver does not support the LSI MegaRAID SAS 8204ELP, 8204XLP, 8208ELP, and 8208XLP controllers.
FILES
/kernel/drv/mega_sas 32-bit ELF kernel module. (x86)
/kernel/drv/amd64/mega_sas 64-bit kernel module. (x86)
/kernel/drv/mega_sas.conf Driver configuration file (contains no user-configurable options).
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Architecture |x86-based systems |
+-----------------------------+-----------------------------+
|Availability |SUNWmegasas |
+-----------------------------+-----------------------------+
|Interface stability |Uncommitted |
+-----------------------------+-----------------------------+
SEE ALSO prtconf(1M), attributes(5), sata(7D), scsi_hba_attach_setup(9F), scsi_sync_pkt(9F), scsi_transport(9F), scsi_inquiry(9S), scsi_device(9S),
scsi_pkt(9S)
Small Computer System Interface-2 (SCSI-2)
SunOS 5.11 14 Aug 2008 mega_sas(7D)
