However, I am not able to. Error received was "Connection was reset".
(Attached image)
My laptop IP is 192.168.8.149, and I do a telnet to confirm the connectivity :
I do a curl directly from the host that runs the atricore modules :
This is the output from ss -tulpn for port 8081 :
Correct me if I am wrong, but I believe the telnet clearly shows that the access to that ip and port is not available, and most probably due to physical firewall connection?
This is because there is no firewalld running within the server itself :
And what does the status HTTP/1.1 302 Found mean from the curl output?
I hope opening the port at the physical firewall level will resolve this problem?
I would like to try and answer your question but I'm completely confused. We need a lot more information to even start to think about it.
However, let me state a couple of facts here (to prompt you to tell us more).
1. Your laptop ip address is 192.168.8.149 and your server address is 192.168.121.72 so if your subnet mask is (typical) 255.255.255.0 then these two addresses are NOT on the same network and so your laptop will send the connection request to its configured gateway. (You could try changing your laptop ip address to 192.168.121.xxx to see if it connects then).
2. You specify a port number on a connection command line when you know that there is a listener on that port number at the other end for the network protocol/service that you are using. If you have a particular service listening on port 8081 then that port number is not also going to work for telnet protocol. By default (ie, without specifying a port number) telnet uses port 23. So you would not specify a different port number on a telnet command line unless you KNOW that a telnet listener is configured on port 8081 at the other end. Telnet will fail to connect otherwise.
If you know all this already then I apologize for not understanding your question but please provide much more information.
Q: Can you ping your target ip address? If that fails then fix that first.
Hello,
Am very new to perl , please help me here !!
I need help in reading a URL from command line using PERL:: Mechanize and needs all the contents from the URL to get into a file.
below is the script which i have written so far ,
#!/usr/bin/perl
use LWP::UserAgent;
use... (2 Replies)
Discussion started by: scott_cog
2 Replies
2. Post Here to Contact Site Administrators and Moderators
Here is the URL we will use:
https://www.unix.com/post-here-contact-site-administrators-moderators/241569-doesnt-allow-me-use-code-tags.html
I will put this in this text with the URL BBCODE.
Now I will save the thread and test the URL. (1 Reply)
Here is what I have so far:
find . -name "*php*" -or -name "*htm*" | xargs grep -i iframe | awk -F'"' '/<iframe*/{gsub(/.\*iframe>/,"\"");print $2}'
Here is an example content of a PHP or HTM(HTML) file:
<iframe src="http://ADDRESS_1/?click=5BBB08\" width=1 height=1... (18 Replies)
I am trying to find a way to test some code, but I need to rewrite a specific URL only from a specific HTTP_HOST
The call goes out to
http://SUB.DOMAIN.COM/showAssignment/7bde10b45efdd7a97629ef2fe01f7303/jsmodule/Nevow.Athena
The ID in the middle is always random due to the cookie.
I... (5 Replies)
We have two servers A and B (both running Solaris 10) out of which one is application server and the other is database server. The two servers faced certain network issues and the two servers were temporarily disconnected.this happened around 5AM GMT monday.Can anyone suggest some log files or... (2 Replies)
Hello,
I need to redirect an existing URL, how can i do that?
There's a current web address to a GUI that I have to redirect to another webaddress. Does anyone know how to do this?
This is on Unix boxes Linux.
example:
https://m45.testing.address.net/host.php
make it so the... (3 Replies)