HP-UX 10.2 servers interoperability with IBM mass storage devices

8 More Discussions You Might Find Interesting

1. AIX

Mounting USB Mass Storage

Hi experts, recently i'm exploring USB with filesystem FAT32 mounting on my aix oslevel 6100-04-02-1007. I tried to google to get solutions but failed. Thus, i post it here hope to get solution. Appreciate :) This is my usb drives:

2. Cybersecurity

How to disable USB for storage devices in Suse?

Hello folks, for some confidential reason, I need to disable the USB to access the storage devices in Suse11.2, but I still need two USB for the mouse and keyboard. Anyone knows? Thanks a lot in advance!

3. AIX

IBM SAN storage -- cache battery

Hello, I have IBM SAN STORAGE DS4100 and one of the cache battery for the controller is dead. Suddenly the performance has been degraded and access to SAN disks ( reading and writing ) became very slow ? My query: Replacing the battery will take 6 days, so in the mean time what are the ways...

4. Solaris

Cannot see the IBM SAN storage

HI all, I had recently change the Server storage from EMC to the IBM SAN. but after the configuration, the IBM success to see the server HBA port and successfully assign a LUN for the server. When i go to the server, and restarted it. i use the "format" command to check, but din see any...

5. AIX

IBM DS8000 storage

Sorry Moderator, I know the topic is not allowed here but I couldnot find any other topics to get help from.. So I am interested if anybody knows software to monitor DS8000 storage performance etc. thanks in advance

6. UNIX for Advanced & Expert Users

How to enumerate USB Mass Storage devices?

Hi all, I want to write a program in C that can enumerate all USB massand their mount point storage on my system. i want to give ability to copy one file to desired USB mass storage or read a file from it. I have posted another question about how can recieve USB arrival in this forum. I think...

7. AIX

Need help in uninstalling devices.common.IBM.mpio.rte on 5.3

Hello, I have been trying to uninstall devices.common.IBM.mpio.rte from an aix5.3 box but have not been successful because it shows a whole list of dependant bos & devices packages. I have tried deleting the hdisks, dars and the dacs using rmdev -dl, but it still doesn't work. Any help on...

8. Linux

Some problem about usb mass storage device

Dear linuxers, I have a usb mess storage device. My OS is rh as3 update2. Each time I use the command mount -t vfat /dev/sda1 /mnt/usb I got the error "the device is not a valid block device". I found from google that I should install the module sd_mod I use the command insmod sd_mod...

LEARN ABOUT HPUX

xserver

Xserver(1)						      General Commands Manual							Xserver(1)

NAME

       X - X Window System display server dispatcher

SYNOPSIS

       X [ option ...]

DESCRIPTION
:
       Hewlett-Packard	supports  two  X  servers on HP-UX platforms, the Xhp X server which supports HP VISUALIZE graphics devices and the Xf86 X
       server which supports all other graphics devices.  These X servers are delivered as /usr/bin/X11/Xhp and /usr/bin/X11/Xf86.

       The X dispatcher determines which X server to launch based on the available graphics devices.  The control file /etc/X11/Xstart can provide
       additional  guidance to the X dispatcher.  The control file allows the user to specify which X server to start for given display connection
       numbers. The only X servers supported by the X dispatcher are Xhp, Xf86 and Xvfb.  If no Xstart	file  exists,  the  dispatcher	loads  the
       appropriate  X server for the graphics device in the system.  HP-UX does not deliver the /etc/X11/Xstart file.  This file can be created by
       using the SAM/SMH utility.

OPTIONS

       If the X dispatcher is invoked with no arguments, the display connection is assumed to be :0.  The X dispatcher checks for display  connec-
       tion  options  and, if found, uses that display connection number when it checks the Xstart file.  All other options are passed on to the X
       server when it is started and it is the X server's responsibility to validate these options.  Not all options may be supported  on  both  X
       servers; refer to Xhp(1) and Xf86(1) to verify supported options for each X server.

RETURN VALUE

       None

Xstart EXAMPLES
       The control file syntax is the X server to start followed by the display connection number.  Valid entries take the form of:

       Xhp :0				       Start the Xhp X server on display connection 0

       Xf86 :10 			       Start the Xf86 X server on display 10

       /usr/bin/X11/Xhp :5		       Start the Xhp X server on display connection 5

       /usr/bin/X11/Xvfb :7		       Start the X Virtual Framebuffer server on display connection 7

FILES

       /etc/X11/Xstart			       Dispatcher control file.

       /var/X11/Xserver/logs/Xstartup.N.log    X dispatcher log file for display N.

SEE ALSO

       X(1), Xhp(1), Xf86(1)

STANDARDS CONFORMANCE

       See the appropriate section in Xhp(1) or Xf86(1).

																	Xserver(1)

UNIX for Advanced & Expert Users