Space Issue

10 More Discussions You Might Find Interesting

1. Solaris

Solaris 8 metainit space issue

I am trying to create soft partition metaclear -r d109 metainit d109 -p d100 -o 178423817 -b 33554432 After i did this i saw the df -k /dev/md/dsk/d109 0 779600337 0 0% /test df -k shows that it is full? also i have tried adding no logging entry in /etc/vfstab...

2. UNIX for Advanced & Expert Users

Swap space issue

I have Solaris-10 with mutiple zones running in it. My Big Brother monitoring is complaining for very less swap space available, but I am not able to find, what process has consumed its swap space and how to clear it. All zones including global server have almost blank /tmp with very less data....

3. HP-UX

Swap space issue.

Hi, I am not sure how many scripts / java processes running on my HP-UX server. I need to calculate the total heap of these processes. I then need to recommend increasing the swap memory to be increase and equal to total heap if that is the right concept. Currently we are facing...

4. Shell Programming and Scripting

Combine 2 line with space issue

Hello all, i am new to linux , and please need your help and suggestion on.... when vi 1.txt :set list, it looks like $ is displaying the end of line Filter: vlan1-BUM-1M $ BUM-1M 0 ...

5. Solaris

swap space issue

HI All, Recently during oracle install I realized that I did not have enough swap space. So I - 1. Created a swap file "swap_fille1" in /rpool using mkfile - # ls -ltr /rpool total 10487121 drwxr-xr-x 3 root root 3 Dec 21 12:09 boot drwxr-xr-x 2 root root ...

6. Shell Programming and Scripting

extra space issue with awk

for diskname in $(lspv |awk '{print $1}') do lquerypv -h /dev/|awk '/'$diskname'/ { print ; exit }' done No output is returning from the loop. I think awk put an extra space to the command - lquerypv -h /dev/ so that the command is executed as i.e. lquerypv -h /dev/ hdisk230 with a space...

7. UNIX Desktop Questions & Answers

Issue with disk space usage

Issue with disk space usage I have the following line in my "df -h" output: Filesystem Size Used Avail Capacity Mounted on /dev/ad4s1a 496M 495M -39M 109% / What is the issue with having 9% excess utilisation? How can I find out what this partition is...

8. Filesystems, Disks and Memory

Issue available disk space while using xdd

Good morning, I seem to be running into an issue with some drives I have attached to my solaris server. The drives are attached correctly, the partitions are arranged with fdisk, the ext3 filesystem is setup using mkfs, and finally the drive is mounted. When I use xdd to perform read/write...

9. UNIX for Dummies Questions & Answers

Need help with space issue

Ok, I have a drive on my unix system that looks like this: /dev/hd4 0.38 0.00 100% 4316 3% / I can't find any file on that drive that would account for the 400MB. How can I thoroughly find the culprit of this space? I've done ls -al, but don't see anything that...

10. UNIX for Dummies Questions & Answers

Space issue with Directory

Hi, How can I check whether a directory has enough space to create file? I have checked the space is availabe in the file system. For example: the directory /var/tmp resides in root file system. In the root file system currently 20% (5.5gb) space availabe. but how can I check the in the /var/tmp,...

LEARN ABOUT FREEBSD

msdosfs

MSDOSFS(5)						      BSD File Formats Manual							MSDOSFS(5)

NAME

     msdosfs -- MS-DOS file system

SYNOPSIS

     options MSDOSFS

DESCRIPTION

     The msdosfs driver will permit the FreeBSD kernel to read and write MS-DOS based file systems.

     The most common usage follows:

	   mount -t msdosfs /dev/ada0sN /mnt

     where N is the partition number and /mnt is a mount point.  Some users tend to create a /dos directory for msdosfs mount points.  This helps
     to keep better track of the file system, and make it more easily accessible.

     It is possible to define an entry in /etc/fstab that looks similar to:

     /dev/ada0sN	     /dos    msdosfs	     rw      0	     0

     This will mount an MS-DOS based partition at the /dos mount point during system boot.  Using /mnt as a permanent mount point is not advised
     as its intention has always been to be a temporary mount point for floppy and ZIP disks.  See hier(7) for more information on FreeBSD direc-
     tory layout.

SEE ALSO

     mount(2), unmount(2), mount(8), mount_msdosfs(8), umount(8)

AUTHORS

     This manual page was written by Tom Rhodes <trhodes@FreeBSD.org>.

BSD
								  October 1, 2013							       BSD

UNIX for Advanced & Expert Users