OpenServer 6.0v installation

10 More Discussions You Might Find Interesting

1. SCO

Installation on SCO Openserver 5.0.5

Hello all, First off- great forum! I have learned a lot just by reading some of the questions and answers. Good to see there are good people out there still willing to help! Here is my dilemma- I have a fairly new server running an Activant product on it, which runs SCO openserver 5.0.5...

2. UNIX for Advanced & Expert Users

Installation of Sco Openserver 5.0.7 on HP DC 7600

Hi All , I wanted to install SCO Open server 5.0.7 on HP DC7600 Desktop Machine, is there any bootloader and which site i can find it to enable me install it because the system is not recognizing the Hard disk just like the ML G Series machine installations. Please help if you have done this...

3. SCO

sco openserver release 5.0.5 installation problems on notebook

hello, i want to install release 5.0.5 on my notebook but the system hangs when extracing files from source media in fact after configuration all of setting please help me:confused:

4. SCO

SCO OpenServer 5.0.7 Installation problem on HP ML310 G4

can not for the life of me workout which BTLD to load allways shows no HDD available can any one give me a clue tried hpsas aacraid lsil a160 a320 server is a ML310 G4 ?????:confused::confused:

5. SCO

openserver 6.0 installation PANIC

I'm trying to install openserver 6.0 on a locally assembled ACPI Multiprocessor PC with an intel core 2 dou e4400 @ 2 ghx and a WD8000JD SATA HD. Immediately after the startup screen I get "PANIC: kernel-mode address fault on kernel address 0xf000ff53". I get this message even if the drive is...

6. SCO

SCO OpenServer 5.0.7 Installation problem

we are installing Openserver 5.0.7, system have SAS controller (Hard Disk Attached) as well as Adaptec ultra 320 controller (Tape Drive Attached). At the time of installation we link both driver BTLD Boot: Defbootstr link=accraid ad320 Aftes succesfully installation of accraid btld...

7. SCO

OpenServer 6.0 installation hangs on FSC L200

Hello! I made a try to install SCO OS 6.0 on Fujitsu-Siemens L200 server. The installation hangs on the logo screen after the very fast rotating of the small circles. On another simple PC everything went OK. Any idias will be greatly appreciated.

8. SCO

sco openserver 5.07 installation problem

Hi everyone, We r installing sco openserver 5.07 on dell poweredge 2800 but we are facing problem when installing SCSI-raid drivers. Dell provide Perc4 raid card and we dont found raid drivers for this specific raid card. So we r stuck up on primary stage and we also dont know the...

9. Solaris

installation of Solaris: installation bypasses network config.

hello solaris friends, I've tried installing Sun Solaris 10.0, but everytime it seems to bypass the network config. screen that looks similar to this...here's the url: http://www.hup.hu/old/images/hup/Solaris/Sol10beta7/9.png I'm able to install it all the way through but I get no...

10. IP Networking

Installation Problem in Unix Openserver

I have certain problems while Installing UNIX OPENSERVER.Could anyone solve that if I provide that problem.

LEARN ABOUT MINIX

partitio

PARTITION(8)						      System Manager's Manual						      PARTITION(8)

NAME

       partition - make a partition table

SYNOPSIS

       partition [-mf] device [type:]size[+*] ...

DESCRIPTION

       Partition  makes  a partition table on device using the types and sizes given.  It may be used in combination with repartition(8) for auto-
       matic installation of Minix.

       You may give up to four type:size[+*] specifications for the partitions.  You may also specify holes before, between, and after the  parti-
       tions.  A hole differs from a partition specification by not having a type.

       The first hole is by default 1 sector to make space for the primary bootstrap and the partition table.  The other holes are 0.

       The  type  field is the type of the partitition in hexadecimal.	The size field is the partition's size in sectors.  The + or * may option-
       ally be added to indicate that the partition must be expanded to contain any leftover space on the device or to mark the partition active.

       Partitions are padded out to cylinder boundaries, except for the first one, it starts on track 1.  Some operating systems care about  this.
       Minix and MS-DOS do not.

OPTIONS

       -m     Minix only, no need to pad partitions.  This is the default for subpartition tables.

       -f     Force making a partition table even if the device is too small.

EXAMPLE

       partition /dev/hd0 01:16384 81:40000 81:2880* 06:20000+

       Partitions  disk 0 into an 8 Mb DOS partition, 20 Mb Minix /usr, 1.44 Mb Minix / (active), and a DOS partition of at least 10 Mb at the end
       of the disk.  (06:0+ would have been ok too, it's just a sanity check.)

SEE ALSO

       hd(4), part(8), repartition(8).

AUTHOR

       Kees J. Bot (kjb@cs.vu.nl)

																      PARTITION(8)

UNIX for Advanced & Expert Users