8 More Discussions You Might Find Interesting
1. Programming
how to register callback function in unix?? (0 Replies)
Discussion started by: powyama
0 Replies
2. Solaris
Hello all,
I have a problem with my x4270_m2 server. I have a GBE lan built into the back of my server and I have a QGE pci card in slot 2 to be used as a redundant.
My server is not picking up the QGE lan card in slot2. From investigation of the /etc/path_to_inst, which shows:
#grep e1000... (2 Replies)
Discussion started by: kerrygold
2 Replies
3. UNIX for Dummies Questions & Answers
Hi all,
Is it possible to do the following in Linux (kernel 2.6.x):
- A user-space thread goes to "sleep". Using any call/mechanism
- On a hardware generated interrupt, the Interrupt handler (ISR) "wakes" the sleeping user-thread.
I have seen wait_event() and wake_up() but it appears... (1 Reply)
Discussion started by: agaurav
1 Replies
4. Filesystems, Disks and Memory
Alguien me puede ayudar, necesito saber cuantos slot de memoria disponibles tiene un RS/6000 AIX (1 Reply)
Discussion started by: ivan.estay
1 Replies
5. Solaris
hi all,
i have a sunfire v440 server , someone can tell me if this server contains a AGP slots ? thanx (4 Replies)
Discussion started by: lid-j-one
4 Replies
6. Solaris
Hi,
How can I know slot wise info on a sun v480 box. I want to have the details like which slot has which card (slot 1- HBA, slot 2 - quad NIC) ..
I know that sysdef, prtconf or prtdiag outputs will help to get this. But I dont know how to conclude from those outputs. Can anybody help me to... (4 Replies)
Discussion started by: vasu2020
4 Replies
7. UNIX for Dummies Questions & Answers
Hi,
im having a problem installing my pci wireless card. Im using knoppix, but my problem is with the mobo i think. im using an older laptop, toshiba satellite 2540 and when i plug in the card i get lights on sometimes. this means its getting power right. so then to install the card into the... (0 Replies)
Discussion started by: jestra
0 Replies
8. UNIX for Advanced & Expert Users
Hi all..
I have a Sun Ultra 450 with a lot of drives and scsi controllers installed and i have one bad internal disk.. How can "map" ex /dev/dsk/c3t2d0s0 to a slot in the internal cabinet? Any good ideas?
I dont want to remove the wrong disk :)
thanks in advance.. (3 Replies)
Discussion started by: s93366
3 Replies
PCITWEAK(1) General Commands Manual PCITWEAK(1)
NAME
pcitweak - read/write PCI config space
SYNOPSIS
pcitweak -l
pcitweak -r PCI-ID [-b|-h] offset
pcitweak -w PCI-ID [-b|-h] offset value
DESCRIPTION
Pcitweak is a utility that can be used to examine or change registers in the PCI configuration space. On most platfoms pcitweak can only
be run by the root user.
OPTIONS
-l Probe the PCI buses and print a line for each detected device. Each line contains the bus location (bus:device:function), chip
vendor/device, card (subsystem) vendor/card, revision, class and header type. All values printed are in hexadecimal.
-r PCI-ID
Read the PCI configuration space register at offset for the PCI device at bus location PCI-ID. PCI-ID should be given in the form
bus:device:function, with each value in hexadecimal. By default, a 32-bit register is read.
-w PCI-ID
Write value to the PCI configuration space register at offset for the PCI device at bus location PCI-ID. PCI-ID should be given in
the form bus:device:function, with each value in hexadecimal. By default, a 32-bit register is written.
-b Read or write an 8-bit value (byte).
-h Read or write a 16-bit value (halfword).
SEE ALSO
scanpci(1)
AUTHORS
David Dawes (dawes@xfree86.org).
XFree86 Version Version 4.3.0 PCITWEAK(1)