Processes on FreeBSD are stuck in "pipewr" state

9 More Discussions You Might Find Interesting

1. Solaris

How to remove a LUN in "Online Busy" state?

Hi all, I have a LUN that is in "Online Busy" when I issue the dev_gestate subcommand of luxadm: root@es088wb6:~# luxadm -v -e dev_getstate /dev/rdsk/c21t50050763090887FEd4s2 phys path = "/devices/pci@6c0/pci@1/pci@0/pci@4/SUNW,qlc@0/fp@0,0/ssd@w50050763090887fe,4:c,raw" ...

2. Solaris

Solaris 5.10 "Move Pointer" stuck

Hey there, I joined this forum just now cause I need help with an old SUN machine at work. I work on a helpdesk and we use a SOLARIS 5.10 OS. Every once in a while we will try to move one of our windows out of the way to make room on the desktop, and sometimes the mouse doesn't release what we...

3. Solaris

How to solve M5000 CPU "Deconfigured" state?

Hi Community, i have one M5000 spare machine which was handled by support team. they told me that it is gone completely . i have checked the status. before it was showing MBU_B degraded. i updated to latest firmware and , resetted the xscf and now this is showing as normal. MBU_B...

4. IP Networking

Stuck at "bringing up interface eth0:"

Server is stuck at "Stuck at "bringing up interface eth0:"" after i hard reset the server I have IPMI access, please help me diagnose the cause if you can :(

5. BSD

Process stuck in "pipewr" state

Hi Experts, I am executing "svn" checkout command through my java code on a freeBSD machine. SVN checkout gets started , but when I run "top" command on my freebsd machine, I have observed that "svn" processes are stuck in "pipewr" state. Any pointer for this problem? Thanks, akash

6. Shell Programming and Scripting

awk command to replace ";" with "|" and ""|" at diferent places in line of file

Hi, I have line in input file as below: 3G_CENTRAL;INDONESIA_(M)_TELKOMSEL;SPECIAL_WORLD_GRP_7_FA_2_TELKOMSEL My expected output for line in the file must be : "1-Radon1-cMOC_deg"|"LDIndex"|"3G_CENTRAL|INDONESIA_(M)_TELKOMSEL"|LAST|"SPECIAL_WORLD_GRP_7_FA_2_TELKOMSEL" Can someone...

7. AIX

"fuser -c -k /XXX/XXXXXXX" Fails and stuck on AIX 6100-05-01-1016

Hi I was wondering if anybody has come across in a failure of fuser command. We have a backup script that is: fuser -c -k /XXX/XXXXXXX sync;sync umount /XXX/XXXXXXX/ backup -0 -f /dev/rmt0.1 -u /dev/XXXXXXXlv mount /XXX/XXXXXXX/ sync;sync The script is called from crontab via an...

8. Solaris

Printer Entries stuck "finished printing"

On Solaris 8, when I do a lpstat -o: I have tried cancel 140828p-16974, but the entries remain New prints to this printer and others work successfully. Can anyone suggest how to get rid of these entries. Thanks

9. AIX

boot process stuck on "Welcome to AIX" banner

Good afternoon, I'm currently working on an IBM 9110-510, with an AIX 6.1 on it. Currently, I've put an HyperTerminal on the machine vty0. Folowing the procedure given by a support guy(�details), I'm able to get to the AIX banner ...

LEARN ABOUT DEBIAN

svn-bisect

SVN-BISECT(1)						      General Commands Manual						     SVN-BISECT(1)

NAME

       svn-bisect - Bisect Subversion revisions to find a regression

SYNOPSIS

       svn-bisect start [good_rev [bad_rev]]

       svn-bisect {good|bad} [rev]

       svn-bisect run command

       svn-bisect reset

       svn-bisect status

DESCRIPTION

       svn-bisect  helps  to  automate	finding a bug or behavior change in a Subversion working copy.	Given an initial "good" revision, with the
       desired or original behavior, and a newer "bad" revision, with the undesired or modified behavior,  svn-bisect  will  do  a  binary  search
       through the revision range to find which revision caused the change.

       svn-bisect  must  be initialized in a working copy, with svn-bisect start.  It also needs to be given at least one good revision (the base-
       line) and one bad revision (known modified behavior) revision.

       Sub-commands:

       start  Initializes or reinitializes svn-bisect; optionally takes good and bad revision parameters.

       good rev

       bad rev
	      Tells svn-bisect that a revision is good or bad, defining or narrowing the search space.	If not specified, revision defaults to the
	      current  revision  in  the working copy.	svn-bisect will then update to a revision halfway between the new good and bad boundaries.
	      If this update crosses a point where a branch was created, it switches in or out of the branch.

       reset  Resets the working copy to the revision and branch where svn-bisect start was run.  In the simple case this is equivalent to  rm	-r
	      .svn-bisect;  svn  update,  but  not  if	it  has crossed branches, and not if you did not start at the HEAD revision.  In any case,
	      svn-bisect never keeps track of mixed-revision working copies, so do not use svn-bisect in a working  copy  that	will  need  to	be
	      restored to mixed revisions.

       status Prints a brief status message.

       run command
	      Runs  the  bisection in a loop.  You must have already defined initial good and bad boundary conditions.	Each iteration through the
	      loop runs command as a shell command (a single argument, quoted if necessary) on the chosen revision, then  marks  the  revision	as
	      good or bad, based on the exit status of command.

EXAMPLES

       Assume you are trying to find which revision between 1250 and 1400 caused the make check command to fail.

	   svn-bisect start 1250 1400
	   svn-bisect run 'make check'
	   svn-bisect reset

ENVIRONMENT

       SVN    The Subversion command-line program to call (default svn).

FILES

       .svn-bisect
	      The directory containing state information, removed after a successful bisection.

SEE ALSO

       git-bisect(1).

AUTHOR

       Written by Robert Millan and Peter Samuelson, for the Debian Project (but may be used by others).

								    2009-10-22							     SVN-BISECT(1)

UNIX for Advanced & Expert Users