Virtual CDROM refuses to quit

8 More Discussions You Might Find Interesting

1. UNIX for Beginners Questions & Answers

Providing virtual machine priority in kvm based virtual machines

Hi All, Is there any way I can prioritize my VMs when there is resource crunch in host machine so that some VMs will be allocated more vcpu, more memory than other VMs in kvm/qemu hypervisor based virtual machines? Lets say in my cloud environment my Ubuntu 16 compute hosts are running some...

2. UNIX for Beginners Questions & Answers

A function that refuses to run anywhere else but main()

Hi. I have some code, that for some reason, I could not post it here in this post. Here's the address for it: #if 0 shc Version 4.0.1, Generic Shell Script Compiler GNU GPL Version 3 Md - Pastebin.com First off, I used "shc" to convert the code from shell script to C. And The...

3. UNIX for Dummies Questions & Answers

I have firewall rules to open ports, why telnet refuses connection?

Alright... this question comes from the fact that I'm trying to setup postfix to relay messages to Office 365 SMTP but its giving me connection refused... I read that if you have doubts if your port is open or not you should telnet to them so thats what I did. This is a Red Hat 6.3 box. My...

4. Solaris

Sendmail refuses to send via relay

Hi I have two realtively identical Solaris zones. They both appear to have the same config in relation to sendmail. But, when I send a test email using mailx the first one sends via a mail relay and the other sends via localhost. I need them both to use the relay but can't figure out what is...

5. Debian

Postfix refuses POP clients after mysqlizing back end

Hello, I have attempted to mysqlize the backend of my postfix config. Since doing that I have not been able to connect to my server via pop clients. I am using courier as my pop server. I am suffering authentication failures even though the correct username and password are supplied. ...

6. Shell Programming and Scripting

sed script to generate hyperlinks refuses to work

Hi All, I'm new to the forum and not a programmer, but I'm writing a bash script to preprocess definitions of technical terms by inserting hyperlinks pointing to other pages in the glossary before the pages are posted to our server, using a standard naming convention for the pages. The...

7. UNIX for Dummies Questions & Answers

Crontab refuses to save changes!

I'm trying to create a new crontab entry for a user on a debian box but whenever I do a crontab -e or crontab -u username -e then edit the crontab (with vim as my default editor) and :wq. I get the error message: no crontab for username - using an empty one crontab: no changes made to crontab...

8. UNIX for Dummies Questions & Answers

.netrc refuses password

Hi trying to ftp a printer to collect info but the ftp file shows that when it gets to password the mode is incorrect both the login and the password are not compulsory (e.g. if the user hits the enter button twice the ftp session is initiated) any ideas :confused:

LEARN ABOUT SUNOS

raidctl

raidctl(1M)						  System Administration Commands					       raidctl(1M)

NAME

       raidctl - RAID hardware utility

SYNOPSIS

       raidctl -c disk1 disk2

       raidctl -d disk1

       raidctl [-f] -F filename controller...

       raidctl -l [controller...]

DESCRIPTION

       The  raidctl  utility  creates, deletes, or displays RAID volumes of the LSI1030 HW Raid controllers that include RAID support. The utility
       also updates firmware/fcode/BIOS for both RAID and non-RAID controllers.

       The raidctl utility requires privileges that are controlled by the underlying file-system permissions. Only privileged users can manipulate
       the RAID system configuration. If a non-privileged user attempts to create or delete a RAID volume, the command fails with EPERM.

       Without options, raidctl displays the current RAID configuration on all exisiting controllers.

OPTIONS

       The following options are supported:

       -c disk1 disk2 (for on board)

	   Create  a  mirror using disk1 and disk2. Replace the contents of disk2 with the contents of disk1. Specify disk1 and disk2 in canonical
	   form, for example, c0t0d0.

	   When you create a a RAID volume, the RAID volume assumes the identity of the first target in the disk pair (disk1). The  second  target
	   (disk2) disappears from the system. Therefore, the RAID volume appears as one disk.

	   To  have  a successful RAID creation, there must not already be a RAID configuration present on the specified controller. Additionally,
	   the secondary disk must not be mounted, as it has all its data erased and replaced with the primary disk's data.

       -d disk1 (for on board)

	   Delete the RAID volume specified as disk1.

	   Specify disk1 in canonical form, for example, c0t0d0.

       -f (for HBA)

	   Force an update. Do not prompt.

       -F filename controller (for HBA)

	   Update the firmware running on the specified controller (controller).

       -l [controller ...] (for on board)

	   List the system's RAID configuration. If controller is specified, list RAID configurations for controller.

	   Output from the -l lists the following information:

	   RAID Volume	   Displays logical RAID volume name.

	   RAID Status	   Displays RAID status as either RESYNCING (disks are syncing), DEGRADED RAID is operating with  reduced  functionality),
			   OK (operating optimally), or FAILED (non-functional).

	   RAID Disk	   Displays RAID disk name.

	   Disk Status	   Displays disk status as either OK or FAILED.

EXAMPLES

       Example 1: Creating the RAID Configuration

       The following command creates the RAID configuration:

       # raidctl -c c0t0d0 c0t1d0
       RAID Volume 'c0t0d0' created

       Example 2: Displaying the RAID Configuration

       The following command displays the RAID configuration:

       # raidctl
       RAID	 RAID	   RAID      Disk
       Volume	 Status    Disk      Status
       ----------------------------------------
       c0t0d0	 RESYNCING c0t0d0    OK
			   c0t1d0    OK

       Example 3: Deleting the RAID Configuration

       The following command deletes the RAID configuration:

       # raidctl -d c0t0d0
       RAID Volume 'c0t0d0' deleted

       Example 4: Updating Flash Images on the Controller

       The following command updates flash images on the controller:

       # raidctl -F lsi1030.fw 0
       Update flash image on controller 0? (y/N): y
       Flash updated successfully

EXIT STATUS

       The following exit values are returned:

       0	Successful completion.

       1	Invalid command line input.

       2	Request operation failed.

ATTRIBUTES

       See attributes(5) for descriptions of the following attributes:

       +-----------------------------+-----------------------------+
       |      ATTRIBUTE TYPE	     |	    ATTRIBUTE VALUE	   |
       +-----------------------------+-----------------------------+
       |Availability		     |SUNWcsu			   |
       +-----------------------------+-----------------------------+

SEE ALSO

       attributes(5)

       System Administration Guide: Basic Administration

SunOS 5.10							    17 Aug 2004 						       raidctl(1M)

UNIX for Advanced & Expert Users