bootup script

10 More Discussions You Might Find Interesting

1. SCO

Error F painit on bootup

I have a known good external SCSI HD running SCO UNIX OpenServer 5.0.7. I decided that I wanted to be able to run this drive on another computer, so I bought the same SCSI card as before (LSI) and then attempted to boot on the other system. The bootup process hung with the error F painit. I've...

2. Linux

Script under rc3.d not being executed on server bootup

Hello all, I have a script callled 'ABCstartup' setup under /etc/rc.d/init.d Softlink 'S91ABCstartup' pointing to above script has been created under /etc/rc.d/rc3.d The script is not being executed when the server restarts. The script runs successfully via manual execution:...

3. UNIX for Dummies Questions & Answers

bootup sequence

What is the boot up sequence in UNIX?

4. AIX

File system not mounting at bootup

Hi, I've got a recent problem with 2 file systems on an AIX 5.3 server. The fs's are marked to auto mount at startup and do show as being mounted after a a restart however if you cd to the mount point and 'df -g .' it shows the fs hasn't actually mounted. $ mount |grep SQLT0001.0 ...

5. UNIX for Advanced & Expert Users

Multiple runlevel options at Bootup

Is it possible to give multiple runlevel options during boot up.. When the Welcome screen appears, i want to give multiple runlevel options.. So the user can boot into any desired runlevel he wants.. Found this kinda interesting.. Any hints and solutions please?

6. AIX

AIX server freezes on bootup

Issue: AIX server freezes on bootup. Server AIX ver 4.3.3.0 When the AIX server reboots it negotiates NIS. During startup of NFS, customer gets one or more of the following error messages: 0513-056 Timeout waiting for command response. If you specified a foreign host, see the /etc/inittab file...

7. AIX

How to start ssh at bootup

Hi i installed ssh of version v 1.21 and my AIX is of 5.3. I want to start my ssh deamon at the startup can any one please help me out reg.. Thanks in advance..

8. UNIX for Dummies Questions & Answers

Why not automatic bootup

Evry time I start up my mavhine ,have to type in unix at Boot : Is there a way unix should bootup automatically? Asif

9. UNIX for Dummies Questions & Answers

Bootup Error

Hi all The following error was displayed when a sco server (5.0.5) was booted. What should be done to overcome the problem. Replies appreciated. Bios 03.0 0130688 KB memory good 01 processor(s) in system remote console dialing on, please wait connect fail : modem off cpu clock...

10. UNIX for Dummies Questions & Answers

Triple bootup

Hi guys, May I know how to install Solaris 8 in the way that I can triple boot it with my the other two OS: WIndows ME and Windows 2000 Pro. Can you all please kindly advise me on how to setup the triple boot process inorder to allow Windows ME to be the default OS when being ask to choose...

LEARN ABOUT DEBIAN

dnroute

DNROUTE(8)						      System Manager's Manual							DNROUTE(8)

NAME

       dnroute - DECnet Routing Daemon

SYNOPSIS

       dnroute [options]
       Options:
       [-dvV2Dtnhr]

DESCRIPTION

       dnroute is a daemon that manages the DECnet routing tables to provide a simple
	but probably useful routing policy.
       dnroute	listens  for  incoming	routing  messages  and	adds routes in the kernel for non-local areas that it sees. Routes will be modifed
       according to these messages so that the lowest cost route that is up will always be used. Routes to locally accessible nodes (it  those	in
       the  neighbour  table)  will  also  be  added.	If you want to keep manual control of the route to a particular area, then add a line into
       dnroute.conf. eg:
       manual 26
       will disable dnroute's setting of routing tables for that area. dnetinfo will still show the route that would have been set with (M) on the
       line to show it has been overidden.
       To  implement  its  routing  policies  dnroute  assumes	that  all  interfaces  on the system have a cost of 4. To change this add lines in
       /etc/dnroute.conf for each of the interfaces you need to change. eg
       eth0 6
       eth1 8
       tap0 10
       A script called dnetinfo is provided that gets the routing information from dnroute and displays it on stdout in a format  similar  to  the
       VMS command SHOW NET/OLD.

OPTIONS

       -d     Don't fork and run the background. Use this for debugging.

       -v     Verbose. Log route changes to syslog.

       -D     Debug log. Writes debugging information to stderr. Only useful with -d.

       -h -?  Displays help for using the command.

       -r     Send DECnet routing messages showing the state of local nodes.

       -2     Send DECnet level 2 (area) routing messages. Implies -r.

       -t <secs>
	      Timer to send routing messages on. Defaults to 15 seconds.

       -n     Do not set up routes or send routing messages, just monitor the network. Useful for testing.

       -V     Show the version of dnroute.

SEE ALSO

       dnetd.conf(5), ip(8)

DECnet utilities						   March 30 2006							DNROUTE(8)

UNIX for Advanced & Expert Users