10 More Discussions You Might Find Interesting
1. Red Hat
Hi guys,
thanks for helping out.
If you have two boot disk mirrored and your primary boot disk fails, how will you boot the system from the second disk?
Thank you very much for your assistance on this matter.
Arrey (5 Replies)
Discussion started by: cjashu
5 Replies
2. Solaris
I have a v480 with a mirrored boot disk c1t0 and c1t1. The drives themselves don't show a failure but the mirror's need maintenance.
This is my plan for replacing the drive. I would love feedback to point out what I"m missing or where my steps are incorrect.
Two things I believe I'm... (3 Replies)
Discussion started by: pcoffey
3 Replies
3. Solaris
So I have mirrored disk already set up from c1t0d0 to c1t1d0. Is there some special procedures that I need to do before I do and then try to boot from the mirrored disk? I am using a V490 if that helps... (7 Replies)
Discussion started by: drew_1980
7 Replies
4. Solaris
# metastat
d1: Mirror
Submirror 0: d11
State: Okay
Submirror 1: d12
State: Okay
Pass: 1
Read option: roundrobin (default)
Write option: parallel (default)
Size: 14582208 blocks (7.0 GB)
d11: Submirror of d1
State: Okay
Size: 14582208 blocks... (2 Replies)
Discussion started by: Exposure
2 Replies
5. HP-UX
Hello All,
Am trynig to identify if the local HD's on our BL860 (running 11v3) are indeed mirrored to each other.
Cheers,
Cameron (3 Replies)
Discussion started by: Cameron
3 Replies
6. Solaris
We use SW mirroring (RAID1) using SVM for our SUN servers (which we OEM to end clients with our application on). When I need to make a tape backup for the server (disk), I disable mirroring and perform backup of the entire disk to tape using ufsdump. This process requires an outage and sensitive as... (8 Replies)
Discussion started by: StarSol
8 Replies
7. Solaris
Hi, Im getting a downtime of 4 hrs to do porting of bootdisks.
Currently, the system is running on Sf4800. 2 internal disk 36G connected to a SE3510 storage.
We're getting 72G disks and we want to restore the OS from the current 36G to the 72G disk. System is under veritas volume manager ctrl.... (4 Replies)
Discussion started by: incredible
4 Replies
8. Solaris
Hi guys,
I havent done this before but iam trying to create an image of a mirrorred drive.
Correct me if iam wrong, but when i have two disks setup in raid configuration and have them mirrored in solaris. It then defines at one entity.
How would i create a "flar" image of that one entity... (3 Replies)
Discussion started by: tlee
3 Replies
9. UNIX for Dummies Questions & Answers
What is the correct mkfs syntax to create mirrored disk files systems? I need to make the file system 20gb. For example:
machine# mkfs -F ufs /dev/md/dsk/d40
size not specified
ufs usage: mkfs special size(sectors) \
-m : dump fs cmd line used to make this partition
-V : print this... (4 Replies)
Discussion started by: GLJ@USC
4 Replies
10. AIX
I have AIX 5.1
I ran these commands and was not able to see what disk were mirrored to what. I thought this is what I should do?
lslv -m rd |more
lslv -m db |more
I get a error stating that it can't find or in the device configuation databse.
Is there another way to look? I have a physcal... (1 Reply)
Discussion started by: rocker40
1 Replies
volmirror(8) System Manager's Manual volmirror(8)
NAME
volmirror - Mirrors volumes on a disk or control default mirroring
SYNOPSIS
/usr/sbin/volmirror [-g diskgroup] [-d yes|no] medianame [new_medianame...]
/usr/sbin/volmirror [-g diskgroup] [-d yes|no] -a [new_medianame...]
/usr/sbin/volmirror [-g diskgroup] [-d yes|no]
/usr/sbin/volmirror [-g diskgroup] -D
OPTIONS
The volmirror command supports the following options: Limits operation of the command to the given disk group, as specified by disk group
ID or disk group name. The medianame operands will be evaluated relative to the given disk group. If no disk group is supplied to the
volmirror command, rootdg is presumed. Changes the default for subsequent volume creation, depending on the option argument. If the option
argument is yes, all subsequent volumes created using the volassist command will automatically be created as mirrored volumes. If the
option argument supplied is no, mirroring will be turned off for future volumes by default. Displays current default status for mirroring.
Mirrors all existing volumes for the specified disk group.
DESCRIPTION
The volmirror command provides a mechanism to mirror all the contents of a specified disk, to mirror all currently unmirrored volumes in
the specified disk group, or to change or display the current defaults for mirroring. All volumes that have only a single plex (mirror
copy), will be mirrored by adding an additional plex.
Volumes containing subdisks that reside on more than one disk will not be mirrored by volmirror.
The volmirror command is generally called from the voldiskadm menus. It is not an interactive command and once called, will continue until
completion of the operation or until a failure is detected.
Note
Due to the nature of generating mirror copies of volumes, this command may take a considerable time to complete.
In the first listed form of the command, the disk media name is supplied on the command line to volmirror. That name is taken to be the
only disk from which volumes should be mirrored. In the case of mirroring volumes from a specified disk, only simple single-subdisk volumes
are mirrored.
In the first and second listed forms of the command, the new_medianame ... parameter identifies a new disk media name (or set of names).
The mirroring operation being performed will use these names as targets on which to allocate the mirrors. An error will result if the same
disk is specified for both the source and target disk and if no other viable targets are supplied.
EXAMPLES
The following are examples of the use of the volmirror command. The following command mirrors the contents of the disk named disk01 to any
available space on any available disk. Subsequent calls to volassist will cause created volumes to be mirrored by default. volmirror -d
yes disk01 The following command displays the current status of default mirroring. It prints the string yes if mirroring is currently
enabled or no, if not. volmirror -D The following command mirrors any volumes on disk02 onto disk03. volmirror disk02 disk03
FILES
The defaults file for volassist parameters.
SEE ALSO
volintro(8), volassist(8), volrootmir(8)
volmirror(8)