UNIX for Advanced & Expert Users

Hi guys.
I am in this forum and I have some troubles with my two alphas. I nned to create backup machine for our server DEC 4100.
what is done
created root_domain, usr_domain (ADVFS) on DS20e
restored from backup tape vdump from same directories
if i try to start, i get the following :

Resetting I/O buses...
(boot dkc0.0.0.8.0 -flags A)
block 0 of dkc0.0.0.8.0 is a valid boot block
reading 32 blocks from dkc0.0.0.8.0
bootstrap code read in
base = 200000, image_start = 0, image_bytes = 4000(16384)
initializing HWRPB at 2000
initializing page table at 3ff42000
initializing machine state
setting affinity to the primary CPU
jumping to bootstrap code

Digital UNIX boot - Fri Nov 13 13:15:46 EST 1998

Loading vmunix ...
Loading at 0xfffffc0000230000
Current PAL Revision <0x2004f00010162>
Switching to OSF PALcode Succeeded
New PAL Revision <0x2004a0002015c>

Sizes:
text = 4364416
data = 743008
bss = 1527776
Starting at 0xfffffc000052fa90

Loading vmunix symbol table ... [1243552 bytes]
Alpha boot: available memory from 0x2304000 to 0x3ff40000
Digital UNIX V4.0E (Rev. 1091); Sun Jun 20 10:35:49 MET DST 1999
physical memory = 1024.00 megabytes.
available memory = 988.32 megabytes.
using 1307 buffers containing 10.21 megabytes of memory
Master cpu at slot 0.
Firmware revision: 7.3-1
PALcode: Digital UNIX version 1.92-74
COMPAQ AlphaServer DS20E 666 MHz
mcpcia_adpt_cnfg: eisa bridge found but no assoc. bus struct foud
eisa bridge setup not done
pci1 at mcbus0 slot 5
gpc0 at eisa0
pci0 at mcbus0 slot 4
panic (cpu 0): mcbusconfl: get_bus pci, -1, * -99 failed


DUMP: No primary swap, no explicit dumpdev.
Nowhere to put header, giving up.
CP - SAVE_TERM routine to be called
CP - SAVE_TERM exited with hlt_req = 1, r0 = 00000000.00000000

halted CPU 0

halt code = 5
HALT instruction executed
PC = fffffc0000531620

CPU 0 booting

Resetting I/O buses...
what i think
thre is a problem with video card
Elsa Gloria Synergy,
i am not seeing anything an the display, only blue and cursor.
I am working over serial port.
If I try to install clean , (DEC Unix 4.0B) on alpha DS20, i cannot get X Windows,
Is it the Problem with grafic card? Or does anybody know what this error means?
thanks a lot for your advices.