Power monitoring and logging with Apcupsd and Cacti

5 More Discussions You Might Find Interesting

1. Linux

Syslog not logging successful logging while unlocking server's console

When unlocking a Linux server's console there's no event indicating successful logging Is there a way I can fix this ? I have the following in my rsyslog.conf auth.info /var/log/secure authpriv.info /var/log/secure

2. UNIX and Linux Applications

Apcupsd crashes

I am trying to run apcupsd, but it will not retain contact the UPS root@meow:/home/ethan/UPS/gapcmon-0.8.9# /etc/init.d/apcupsd start Starting UPS power management: A copy of the daemon is still running. If you just stopped it, please wait about 5 seconds for it to shut down....

3. Infrastructure Monitoring

How to install Cacti (a system monitoring and graphing solution) with Nginx?

Here's a short tutorial on installing Cacti with Nginx on Linux.

4. UNIX and Linux Applications

Cacti Getting Error

Dear Expert, I just succesfully installed cacti for monitoring my all of device in my office. But i got the strange, when i was pointing to the browser to run cacti there is a message like this. Invalid PHP_SELF Path What happen on my cacti configuration. Thanxs for your suggestion...

5. HP-UX

How to shutdown Power Trust UPS Monitoring?

Hi, We had a HP Power Trust UPS connected to our HP Server using HP Unix 11. The UPS has died, and been taken off the server. The / filesystem runs out off space (100% full) as a core file is made in /etc/opt/resmon. The core file mentions monitoring of the UPS. Removing this file, another one...

LEARN ABOUT REDHAT

apcsmart

APCSMART(8)						      Network UPS Tools (NUT)						       APCSMART(8)

NAME

       apcsmart - Driver for American Power Conversion Smart Protocol UPS equipment

NOTE

       This  man  page	only  documents the hardware-specific features of the apcsmart driver.	For information about the core driver, see nutups-
       drv(8).

SUPPORTED HARDWARE

       apcsmart should recognize all APC models that use a serial protocol at 2400 bps.  This is primarily the Smart-UPS and Matrix-UPS lines, but
       some Back-UPS Pro models are also supported.

       Some older hardware may only report a handful of variables.  This is usually not a bug - they just don't support anything else.

CABLING

       This  driver  expects  to  see  a  940-0024C cable or a clone by default.  You can switch to the 940-0095B dual-mode cable support with the
       cable= definition described below.

       If your 940-0024C cable is broken or missing, use this diagram to build a clone:

       http://www.exploits.org/nut/library/cables/940-0024C.jpg

EXTRA ARGUMENTS

       This driver supports the following optional settings in the ups.conf(5):

       cable=940-0095B
	      Configure the serial port for the APC 940-0095B dual-mode cable.

       sdtype=num
	      Use shutdown type num, according to this table:

	      0: soft shutdown or powerdown, depending on battery status

	      1: soft shutdown followed by powerdown

	      2: instant power off

	      3: power off with grace period

	      Modes 0 and 1 will power up the load when power returns.	Modes 2 and 3 will keep the load turned off when the power returns.

BUGS

       Some older APC UPS models return bogus data in the status register during a front panel test.  This is usually detected and discarded,  but
       some other unexpected values have occasionally slipped through.

AUTHOR

       Russell Kroll

SEE ALSO

   The core driver:
       nutupsdrv(8)

   Internet resources:
       The NUT (Network UPS Tools) home page: http://www.exploits.org/nut/

       NUT mailing list archives and information: http://lists.exploits.org/

								  Tue Oct 22 2002						       APCSMART(8)

UNIX and Linux RSS News