Bluetooth and GPS: Part 1 - Reading Wireless Serial Port Data

9 More Discussions You Might Find Interesting

1. AIX

Connect GPS to serial port AIX 5.x

HI, Does anyone installed a GPS from his Serial port to an IBM Server serial port with AIX 5.X I would like the rs232 configuration you used on the GPS, and the ttys configuration from your server. Thanks in advance !!!

2. Solaris

Cabling and adapters to communicate to service processor serial port from Windows PC with USB port.

Hello, I have an unloaded T5140 machine and want to access the ILOM for the first time and subsequently the network port after that., and then load Solaris 10 the final January 2011 build. The first part is what confuses me -the cabling. I am coming from a Windows machine (w/appropriate...

3. Debian

Reading data from a serial port

Dear List - I am trying to capture data from a serial port and write it to a file. /var/www$ cat /dev/ttyS0 > scale_value.html cat: /dev/ttyS0: Device or resource busy /var/www# cat /proc/tty/driver/serial serinfo:1.0 driver revision: 0: uart:16550A port:000003F8 irq:4 tx:90...

4. Programming

Wrong data with Read from a serial port.

hi, I've a problem on my C/C++ program with Posix Library. I have to read data from the serial but I have incorrect data, in fact I get a bunch of zeros: "2953.3174, 2785.2126, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0 , 0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0 ,...

5. Shell Programming and Scripting

reading from and writing to serial port

hello all, please any one can provide me the shell script to write data to /dev/ttyS1 and read responce from /dev/ttyS1 and compare the responce to some string .. thnxx ---------- Post updated at 03:35 PM ---------- Previous update was at 11:46 AM ---------- any body help me.. how do i...

6. Solaris

How to enable Serial port on ILOM, when Network Port is enabled in parallel

Hi Everyone, In my environment, I have few T5220. On the iLOM Management Card, I have both Network and Serial port are cabled, I don't have any issues while I try to connect using Network Management port, but when I try to connect the serial port for the same server which is actually connected...

7. SCO

data transfer from serial port

dear sir, pls. can you help me ? , my os is unix sco 5.0.4 and ,server dat derive (1,4gb) not working, now i want to transfer my server data in other machine (unix/other possible) by serial port/other port comminication. thanks pankaj raval

8. Programming

serial port reading

Hai there, Can any one provide me with a ansi c source code for opening com1 or com2 and read data. The port is connected to another serial communication device on rs232 port. The o/s is Sco Unix 5.0.6 Matter urgent Viswanath

9. Programming

Reading incoming data in serial ports

Hi every body, i have the following problem : I need to read incoming data from a serial port, this port has connected a weigth device to it that send the weigth and i need to read this data to my aplication, i had this problem in Window Enviroment and i resolve with a "C" routine, but in Unix...

LEARN ABOUT DEBIAN

gammu-detect

GAMMU-DETECT(1) 						       Gammu							   GAMMU-DETECT(1)

NAME

       gammu-detect - Gammu device detection

       New in version 1.28.95.

SYNOPSIS

       gammu-detect [OPTIONS]

DESCRIPTION

       Script to detect available devices, which might be suitable for gammu.

       Note   This program lists all devices, which might be suitable, it does not do any probing on devices them self.

       Currently it supports following devices:

       o USB devices using udev

       o Serial ports using udev

       o Serial ports on Windows

       o Bluetooth devices using Bluez

       Note   Supported  devices  depend on platform you are using and compiled in features. You can find out what is actually compiled in by run-
	      ning gammu-detect -v.

       This program follows the usual GNU command line syntax, with long options starting with two dashes (--). A summary of options  is  included
       below.

       -h, --help
	      Show summary of options.

       -d, --debug
	      Show debugging output for detecting devices.

       -v, --version
	      Show version information and compiled in features.

       -u, --no-udev
	      Disables scanning of udev.

       -b, --no-bluez
	      Disables scanning using Bluez.

       -w, --no-win32-serial
	      Disables scanning of Windows serial ports.

OUTPUT

       The  output  of	gammu-detect is configuration file for Gammu (see gammurc) with configuration section for every device which might be used
       with gammu.

       Note   You can choose which section to use in gammu by gammu -s.

       When invoked as gammu-detect -d, also all examined devices are listed as comments in the output.

EXAMPLE

       ; Configuration file generated by gammu-detect.
       ; Please check The Gammu Manual for more information.

       [gammu]
       device = /dev/ttyACM0
       name = Nokia E52
       connection = at

       [gammu1]
       device = /dev/ttyACM1
       name = Nokia E52
       connection = at

       [gammu2]
       device = /dev/ttyS0
       name = Phone on serial port 0
       connection = at

       [gammu3]
       device = /dev/ttyS1
       name = Phone on serial port 1
       connection = at

       [gammu4]
       device = /dev/ttyS2
       name = Phone on serial port 2
       connection = at

       [gammu5]
       device = /dev/ttyS3
       name = Phone on serial port 3
       connection = at

       [gammu6]
       device = 5C:57:C8:BB:BB:BB
       name = Nokia E52
       connection = bluephonet

AUTHOR

       Michal iha <michal@cihar.com>

COPYRIGHT

       2009-2012, Michal iha <michal@cihar.com>

1.31.90 							 February 24, 2012						   GAMMU-DETECT(1)

UNIX and Linux RSS News