Bluetooth and GPS: Part 1 - Reading Wireless Serial Port Data

9 More Discussions You Might Find Interesting

1. AIX

Connect GPS to serial port AIX 5.x

HI, Does anyone installed a GPS from his Serial port to an IBM Server serial port with AIX 5.X I would like the rs232 configuration you used on the GPS, and the ttys configuration from your server. Thanks in advance !!!

2. Solaris

Cabling and adapters to communicate to service processor serial port from Windows PC with USB port.

Hello, I have an unloaded T5140 machine and want to access the ILOM for the first time and subsequently the network port after that., and then load Solaris 10 the final January 2011 build. The first part is what confuses me -the cabling. I am coming from a Windows machine (w/appropriate...

3. Debian

Reading data from a serial port

Dear List - I am trying to capture data from a serial port and write it to a file. /var/www$ cat /dev/ttyS0 > scale_value.html cat: /dev/ttyS0: Device or resource busy /var/www# cat /proc/tty/driver/serial serinfo:1.0 driver revision: 0: uart:16550A port:000003F8 irq:4 tx:90...

4. Programming

Wrong data with Read from a serial port.

hi, I've a problem on my C/C++ program with Posix Library. I have to read data from the serial but I have incorrect data, in fact I get a bunch of zeros: "2953.3174, 2785.2126, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0 , 0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0 ,...

5. Shell Programming and Scripting

reading from and writing to serial port

hello all, please any one can provide me the shell script to write data to /dev/ttyS1 and read responce from /dev/ttyS1 and compare the responce to some string .. thnxx ---------- Post updated at 03:35 PM ---------- Previous update was at 11:46 AM ---------- any body help me.. how do i...

6. Solaris

How to enable Serial port on ILOM, when Network Port is enabled in parallel

Hi Everyone, In my environment, I have few T5220. On the iLOM Management Card, I have both Network and Serial port are cabled, I don't have any issues while I try to connect using Network Management port, but when I try to connect the serial port for the same server which is actually connected...

7. SCO

data transfer from serial port

dear sir, pls. can you help me ? , my os is unix sco 5.0.4 and ,server dat derive (1,4gb) not working, now i want to transfer my server data in other machine (unix/other possible) by serial port/other port comminication. thanks pankaj raval

8. Programming

serial port reading

Hai there, Can any one provide me with a ansi c source code for opening com1 or com2 and read data. The port is connected to another serial communication device on rs232 port. The o/s is Sco Unix 5.0.6 Matter urgent Viswanath

9. Programming

Reading incoming data in serial ports

Hi every body, i have the following problem : I need to read incoming data from a serial port, this port has connected a weigth device to it that send the weigth and i need to read this data to my aplication, i had this problem in Window Enviroment and i resolve with a "C" routine, but in Unix...

LEARN ABOUT OSF1

scc

scc(7)							 Miscellaneous Information Manual						    scc(7)

NAME

       scc - Serial keyboard/mouse/communications interface

SYNOPSIS

       controller   scc0   at tc0   slot 3   vector sccintr

DESCRIPTION

       Two  base  board  Zilog scc dual UARTS provide DEC 3000 series personal systems with keyboard, mouse, and serial communications interfaces.
       The serial communications interfaces can operate at baud rates from B50 to B57600 (see tty(7)).

       The driver for the scc interface supports hardware flow control using the Request to Send (RTS) and Clear  to  Send  (CTS)  signals.   When
       hardware  flow  control is enabled, the flow of input data is controlled by the RTS signal and the flow of output data is controlled by the
       CTS signal.  If the CTS signal is off, the driver will suspend output to that line until the CTS lead is reasserted.  Likewise, the  driver
       will  turn off the RTS lead to tell the device connected to the line to stop sending data as a result of congestion on the host side.  When
       the condition clears, the driver will turn on the RTS lead to tell the device to resume sending data.

       In alternate console configurations (that is, no graphics head), communications port 2 (/dev/tty01) becomes the system console. The  serial
       system console port always operates at 9600 BPS, 8-bits, no parity.  No modem or hardware flow control is supported.

RESTRICTIONS

       Data  communications  equipment attached to the console serial port in alternate console configurations must be set to 9600 BPS, 8-bits, no
       parity. The scc driver enforces this restriction.

       Only communications port 1 (/dev/tty00) includes full modem control.

FILES

       console terminal local terminal local terminal

RELATED INFORMATION

       console(7), devio(7), modem(7), tty(7), MAKEDEV(8) delim off

																	    scc(7)

UNIX and Linux RSS News