Bluetooth and GPS: Part 1 - Reading Wireless Serial Port Data

9 More Discussions You Might Find Interesting

1. AIX

Connect GPS to serial port AIX 5.x

HI, Does anyone installed a GPS from his Serial port to an IBM Server serial port with AIX 5.X I would like the rs232 configuration you used on the GPS, and the ttys configuration from your server. Thanks in advance !!!

2. Solaris

Cabling and adapters to communicate to service processor serial port from Windows PC with USB port.

Hello, I have an unloaded T5140 machine and want to access the ILOM for the first time and subsequently the network port after that., and then load Solaris 10 the final January 2011 build. The first part is what confuses me -the cabling. I am coming from a Windows machine (w/appropriate...

3. Debian

Reading data from a serial port

Dear List - I am trying to capture data from a serial port and write it to a file. /var/www$ cat /dev/ttyS0 > scale_value.html cat: /dev/ttyS0: Device or resource busy /var/www# cat /proc/tty/driver/serial serinfo:1.0 driver revision: 0: uart:16550A port:000003F8 irq:4 tx:90...

4. Programming

Wrong data with Read from a serial port.

hi, I've a problem on my C/C++ program with Posix Library. I have to read data from the serial but I have incorrect data, in fact I get a bunch of zeros: "2953.3174, 2785.2126, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0 , 0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0 ,...

5. Shell Programming and Scripting

reading from and writing to serial port

hello all, please any one can provide me the shell script to write data to /dev/ttyS1 and read responce from /dev/ttyS1 and compare the responce to some string .. thnxx ---------- Post updated at 03:35 PM ---------- Previous update was at 11:46 AM ---------- any body help me.. how do i...

6. Solaris

How to enable Serial port on ILOM, when Network Port is enabled in parallel

Hi Everyone, In my environment, I have few T5220. On the iLOM Management Card, I have both Network and Serial port are cabled, I don't have any issues while I try to connect using Network Management port, but when I try to connect the serial port for the same server which is actually connected...

7. SCO

data transfer from serial port

dear sir, pls. can you help me ? , my os is unix sco 5.0.4 and ,server dat derive (1,4gb) not working, now i want to transfer my server data in other machine (unix/other possible) by serial port/other port comminication. thanks pankaj raval

8. Programming

serial port reading

Hai there, Can any one provide me with a ansi c source code for opening com1 or com2 and read data. The port is connected to another serial communication device on rs232 port. The o/s is Sco Unix 5.0.6 Matter urgent Viswanath

9. Programming

Reading incoming data in serial ports

Hi every body, i have the following problem : I need to read incoming data from a serial port, this port has connected a weigth device to it that send the weigth and i need to read this data to my aplication, i had this problem in Window Enviroment and i resolve with a "C" routine, but in Unix...

LEARN ABOUT OSF1

iscc

iscc(7) 						 Miscellaneous Information Manual						   iscc(7)

NAME

       iscc - serial communications interface

SYNOPSIS

       controller  iscc0  at  isa0

DESCRIPTION

       An  onboard  Zilog  8530  DUART	provides  AXPvme-based Single Board Computers with console (CON) and auxiliary (AUX) serial communications
       ports.  Both serial communications ports can operate at baud rates from B50 to B38400,  excluding B134 (see tty(7)).

       On AXPvme Single Board Computers configured with a graphics head as the system console, the CON serial communications port (/dev/tty01)	is
       available for use by application programs as an additional communications port.

       In  the	absence  of a graphics head, the CON serial communications port (/dev/console) becomes the system console. When used as the serial
       system console, the CON serial communications port always operates at 9600 BPS, 8-bits, and no parity.

       Regardless of system console, the AUX serial communications port (/dev/tty00) is always available for use by application programs.

RESTRICTIONS

       Data communications equipment attached to the CON serial communications port must be set to 9600 BPS, 8-bits, no parity when configured	as
       the serial system console. The iscc terminal driver enforces this restriction.

       No modem control is supported for either the CON or AUX serial communications ports.

FILES

       console terminal local terminal local terminal

RELATED INFORMATION

       console(7), devio(7), tty(7), MAKEDEV(8) delim off

																	   iscc(7)

UNIX and Linux RSS News