|
|
|
|
TRIPPLITESU(8) NUT Manual TRIPPLITESU(8) NAME
tripplitesu - Driver for Tripp-Lite SmartOnline (SU) UPS equipment NOTE
This man page only documents the hardware-specific features of the tripplitesu driver. For information about the core driver, see nutupsdrv(8). SUPPORTED HARDWARE
This driver supports the Tripp Lite SmartOnline family (via the serial port). EXTRA ARGUMENTS
This driver supports the following optional settings in the ups.conf(5): lowbatt=num Set the low battery warning threshold in percent at which shutdown is initiated by upsmon(8). By default, the UPS may not report low battery until there are only a few seconds left. Common values are around 25--30. AUTHOR
Allan N. Hessenflow <allanh@kallisti.com> SEE ALSO
The core driver: nutupsdrv(8) Other drivers for Tripp-Lite hardware: tripplite(8), tripplite_usb(8), usbhid-ups(8) Internet resources: The NUT (Network UPS Tools) home page: http://www.networkupstools.org/ Network UPS Tools 05/21/2012 TRIPPLITESU(8)
