Why they(one PC and a notebook) report bing in offline state?


 
Thread Tools Search this Thread
Operating Systems Linux Ubuntu Why they(one PC and a notebook) report bing in offline state?
# 1  
Old 06-03-2012
Why they(one PC and a notebook) report bing in offline state?

Hi,all:

Why they(one PC and a notebook) report bing in offline state?

I directly link a PC with one notebook with a cross cable and all of them are on ubuntu 10.4.0.The only difference is that the PC are on kernel 3.0.4.When they startup information are showed respectively that "...disconnected...you are in off-line state".Why and how could I repair it?

I suspect that this maybe the reason of "lost connection" reported by "scp" command between them.


thanks
liklstar

---------- Post updated 06-03-12 at 12:11 AM ---------- Previous update was 06-02-12 at 08:31 PM ----------

After I remove the "network-manager" and configure the IP addresses manaully the execution of the command "scp" still give me a message "connection refused; lost connection",the execution of "ftp" also tell me "connection refused" and I have to quit.

what is the problem, could anybody give me sone clues? The reported message are as follow:

root@likunlun-desktop:~/experiments# scp ./send-512m root@192.168.0.104:/home/likunlun
ssh: connect to host 192.168.0.104 port 22: Connection refused
lost connection
root@likunlun-desktop:~/experiments#


thanks.
liklstar
Login or Register to Ask a Question

Previous Thread | Next Thread

9 More Discussions You Might Find Interesting

1. What is on Your Mind?

Search Results for the UNIX keyword - Google, Bing, DuckDuckGo

Some search results for the keyword "unix" searches: DuckDuckGo #1 https://www.unix.com/members/1-albums215-picture1254.png Bing #2 https://www.unix.com/members/1-albums215-picture1253.png Google #15 (page 2) https://www.unix.com/members/1-albums215-picture1252.png (1 Reply)
Discussion started by: Neo
1 Replies

2. HP-UX

After adding new iscsi target port, still the session state of that target port is showing offline

Hi, I wanted to configure new iscsi port on HPUX system, i added the target port address and configured it, once done, went to array side and searched for that host iqn number , but was nt able to find the same, came to host, then when i ran "iscsiutil -pVS" command it gave me below result ... (0 Replies)
Discussion started by: Vinay Kumar D
0 Replies

3. AIX

Open firmware state to running state

Hi Admins, I am having a whole system lpar in open firmware state on HMC. How can I bring it to running state ? Let me know. Thanks. (2 Replies)
Discussion started by: snchaudhari2
2 Replies

4. AIX

Lost PIDs on AIX platform? (Bing reused eventhough they does not exist currently for any Component.

Dear ALL, I'm working on a Siebel CRM enterprise which is completely on AIX 5.3 platform. I'm trying to find some information, in case you may be able to help. Is there any command/procedure on AIX 5.3 by which I could check the blocked PIDs or lost PIDs for my Siebel Object Manager... (5 Replies)
Discussion started by: aarora_98
5 Replies

5. UNIX for Advanced & Expert Users

report of autosys job in RUNNING state

I am looking to get a report on autosys jobs in RUNNING state b/w certain time frame (timeA and timeB). What I am after is the list of all the jobs that ran between AND during timeA and timeB. Jobs within the timeframe could either: A: STARTING --> RUNNING --> SUCCESS/FAILURE etc.. B: ... (1 Reply)
Discussion started by: rgilan01
1 Replies

6. Solaris

report of autosys job in RUNNING state

I am looking to get a report on autosys jobs in RUNNING state b/w certain time frame (timeA and timeB). What I am after is the list of all the jobs that ran between AND during timeA and timeB. Jobs within the timeframe could either: A: STARTING --> RUNNING --> SUCCESS/FAILURE etc.. B: ... (2 Replies)
Discussion started by: rgilan01
2 Replies

7. Programming

report of autosys job in RUNNING state

I am looking to get a report on autosys jobs in RUNNING state b/w certain time frame (timeA and timeB). What I am after is the list of all the jobs that ran between AND during timeA and timeB. Jobs within the timeframe could either: A: STARTING --> RUNNING --> SUCCESS/FAILURE etc.. B: ... (0 Replies)
Discussion started by: rgilan01
0 Replies

8. Shell Programming and Scripting

report of autosys job in RUNNING state

I am looking to get a report on autosys jobs in RUNNING state b/w certain time frame (timeA and timeB). What I am after is the list of all the jobs that ran between AND during timeA and timeB. Jobs within the timeframe could either: A: STARTING --> RUNNING --> SUCCESS/FAILURE etc.. B: ... (0 Replies)
Discussion started by: rgilan01
0 Replies

9. What is on Your Mind?

Which Notebook to buy

Hi Im not sure that i post that Thread here on the right place but i hope someone can help me. Im searching for a new Notebook with Linux or Unix as system. Im looking for a Notebook with the following components: Intel Core 2 for mobile min 2GB RAM 15 " Display none reflective ATI or NVidia... (6 Replies)
Discussion started by: MagicMike
6 Replies
Login or Register to Ask a Question
ttk::notebook(n)						 Tk Themed Widget						  ttk::notebook(n)

__________________________________________________________________________________________________________________________________________________

NAME
ttk::notebook - Multi-paned container widget SYNOPSIS
ttk::notebook pathname ?options...? pathname add window ?options...? pathname insert index window ?options...? _________________________________________________________________ DESCRIPTION
A ttk::notebook widget manages a collection of windows and displays a single one at a time. Each slave window is associated with a tab, which the user may select to change the currently-displayed window. STANDARD OPTIONS
-class -cursor -takefocus -style See the ttk_widget manual entry for details on the standard options. WIDGET-SPECIFIC OPTIONS [-height height] If present and greater than zero, specifies the desired height of the pane area (not including internal padding or tabs). Otherwise, the maximum height of all panes is used. [-padding padding] Specifies the amount of extra space to add around the outside of the notebook. The padding is a list of up to four length specifications left top right bottom. If fewer than four elements are specified, bottom defaults to top, right defaults to left, and top defaults to left. [-width width] If present and greater than zero, specifies the desired width of the pane area (not including internal padding). Otherwise, the maximum width of all panes is used. TAB OPTIONS
The following options may be specified for individual notebook panes: [-state state] Either normal, disabled or hidden. If disabled, then the tab is not selectable. If hidden, then the tab is not shown. [-sticky sticky] Specifies how the slave window is positioned within the pane area. Value is a string containing zero or more of the characters n, s, e, or w. Each letter refers to a side (north, south, east, or west) that the slave window will "stick" to, as per the grid geometry manager. [-padding padding] Specifies the amount of extra space to add between the notebook and this pane. Syntax is the same as for the widget -padding option. [-text text] Specifies a string to be displayed in the tab. [-image image] Specifies an image to display in the tab. See ttk_widget(n) for details. [-compound compound] Spec- ifies how to display the image relative to the text, in the case both -text and -image are present. See label(n) for legal values. [-underline underline] Specifies the integer index (0-based) of a character to underline in the text string. The underlined character is used for mnemonic activation if ttk::notebook::enableTraversal is called. TAB IDENTIFIERS
The tabid argument to the following commands may take any of the following forms: o An integer between zero and the number of tabs; o The name of a slave window; o A positional specification of the form "@x,y", which identifies the tab o The literal string "current", which identifies the currently-selected tab; or: o The literal string "end", which returns the number of tabs (only valid for "pathname index"). WIDGET COMMAND
pathname add window ?options...? Adds a new tab to the notebook. See TAB OPTIONS for the list of available options. If window is currently managed by the notebook but hidden, it is restored to its previous position. pathname configure ?options? See ttk::widget(n). pathname cget option See ttk::widget(n). pathname forget tabid Removes the tab specified by tabid, unmaps and unmanages the associated window. pathname hide tabid Hides the tab specified by tabid. The tab will not be displayed, but the associated window remains managed by the notebook and its configuration remembered. Hidden tabs may be restored with the add command. pathname identify component x y Returns the name of the element under the point given by x and y, or the empty string if no component is present at that location. The following subcommands are supported: pathname identify element x y Returns the name of the element at the specified location. pathname identify tab x y Returns the index of the tab at the specified location. pathname index tabid Returns the numeric index of the tab specified by tabid, or the total number of tabs if tabid is the string "end". pathname insert pos subwindow options... Inserts a pane at the specified position. pos is either the string end, an integer index, or the name of a managed subwindow. If subwindow is already managed by the notebook, moves it to the specified position. See TAB OPTIONS for the list of available options. pathname instate statespec ?script...? See ttk::widget(n). pathname select ?tabid? Selects the specified tab. The associated slave window will be displayed, and the previously-selected window (if different) is unmapped. If tabid is omitted, returns the widget name of the currently selected pane. pathname state ?statespec? See ttk::widget(n). pathname tab tabid ?-option ?value ... Query or modify the options of the specific tab. If no -option is specified, returns a dictionary of the tab option values. If one -option is specified, returns the value of that option. Otherwise, sets the -options to the corresponding values. See TAB OPTIONS for the available options. pathname tabs Returns the list of windows managed by the notebook. KEYBOARD TRAVERSAL
To enable keyboard traversal for a toplevel window containing a notebook widget $nb, call: ttk::notebook::enableTraversal $nb This will extend the bindings for the toplevel window containing the notebook as follows: o Control-Tab selects the tab following the currently selected one. o Shift-Control-Tab selects the tab preceding the currently selected one. o Alt-K, where K is the mnemonic (underlined) character of any tab, will select that tab. Multiple notebooks in a single toplevel may be enabled for traversal, including nested notebooks. However, notebook traversal only works properly if all panes are direct children of the notebook. VIRTUAL EVENTS
The notebook widget generates a <<NotebookTabChanged>> virtual event after a new tab is selected. EXAMPLE
pack [ttk::notebook .nb] ttk::notebook::enableTraversal .nb SEE ALSO
ttk::widget(n), grid(n) KEYWORDS
pane, tab Tk 8.5 ttk::notebook(n)