Login or Register to Ask a Question and Join Our Community


Ubuntu

FAQ adding rules in udev for my usb 8G to autorun rsync

Login to Discuss or Reply to this Discussion in Our Community

 
Thread Tools Search this Thread
Operating Systems Linux Ubuntu FAQ adding rules in udev for my usb 8G to autorun rsync
# 1  
Old 11-13-2011
FAQ adding rules in udev for my usb 8G to autorun rsync
Hi,

I would like to ask if someone knows and show/point me or simple help me how udev rules work in lucyd, upon my quest and search all the tuts i used is based on old udev since something i read the udev change in lucyd version.. I want to accomplised when i plug my usb 8Gb device and automount kicks in mounted the usb in /media/sony storage and predefined rsync script must run. Im having problems udev function works for me..

Here some of my available info
Code:
# udevadm info -a -p /block/sdc

Udevadm info starts with the device specified by the devpath and then
walks up the chain of parent devices. It prints for every device
found, all possible attributes in the udev rules key format.
A rule to match, can be composed by the attributes of the device
and the attributes from one single parent device.

looking at device '/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/host14/target14:0:0/14:0:0:0/block/sdc':
KERNEL=="sdc"
SUBSYSTEM=="block"
DRIVER==""
ATTR{range}=="16"
ATTR{ext_range}=="256"
ATTR{removable}=="1"
ATTR{ro}=="0"
ATTR{size}=="15663104"
ATTR{alignment_offset}=="0"
ATTR{capability}=="53"
ATTR{stat}==" 638 15675 44660 2284 4 4 8 1040 0 1876 3324"
ATTR{inflight}==" 0 0"

looking at parent device '/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/host14/target14:0:0/14:0:0:0':
KERNELS=="14:0:0:0"
SUBSYSTEMS=="scsi"
DRIVERS=="sd"
ATTRS{device_blocked}=="0"
ATTRS{type}=="0"
ATTRS{scsi_level}=="0"
ATTRS{vendor}=="Sony "
ATTRS{model}=="Storage Media "
ATTRS{rev}=="0100"
ATTRS{state}=="running"
ATTRS{timeout}=="30"
ATTRS{iocounterbits}=="32"
ATTRS{iorequest_cnt}=="0x5d0"
ATTRS{iodone_cnt}=="0x5d0"
ATTRS{ioerr_cnt}=="0x2"
ATTRS{modalias}=="scsi:t-0x00"
ATTRS{evt_media_change}=="0"
ATTRS{dh_state}=="detached"
ATTRS{queue_depth}=="1"
ATTRS{queue_type}=="none"
ATTRS{max_sectors}=="240"

looking at parent device '/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/host14/target14:0:0':
KERNELS=="target14:0:0"
SUBSYSTEMS=="scsi"
DRIVERS==""

looking at parent device '/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/host14':
KERNELS=="host14"
SUBSYSTEMS=="scsi"
DRIVERS==""

looking at parent device '/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0':
KERNELS=="2-1.4:1.0"
SUBSYSTEMS=="usb"
DRIVERS=="usb-storage"
ATTRS{bInterfaceNumber}=="00"
ATTRS{bAlternateSetting}==" 0"
ATTRS{bNumEndpoints}=="02"
ATTRS{bInterfaceClass}=="08"
ATTRS{bInterfaceSubClass}=="06"
ATTRS{bInterfaceProtocol}=="50"
ATTRS{modalias}=="usb:v054Cp0243d0100dc00dsc00dp00ic08isc06ip50"
ATTRS{supports_autosuspend}=="0"

looking at parent device '/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4':
KERNELS=="2-1.4"
SUBSYSTEMS=="usb"
DRIVERS=="usb"
ATTRS{configuration}==""
ATTRS{bNumInterfaces}==" 1"
ATTRS{bConfigurationValue}=="1"
ATTRS{bmAttributes}=="80"
ATTRS{bMaxPower}=="200mA"
ATTRS{urbnum}=="5005"
ATTRS{idVendor}=="054c"
ATTRS{idProduct}=="0243"
ATTRS{bcdDevice}=="0100"
ATTRS{bDeviceClass}=="00"
ATTRS{bDeviceSubClass}=="00"
ATTRS{bDeviceProtocol}=="00"
ATTRS{bNumConfigurations}=="1"
ATTRS{bMaxPacketSize0}=="64"
ATTRS{speed}=="480"
ATTRS{busnum}=="2"
ATTRS{devnum}=="7"
ATTRS{version}==" 2.00"
ATTRS{maxchild}=="0"
ATTRS{quirks}=="0x0"
ATTRS{authorized}=="1"
ATTRS{manufacturer}=="Sony"
ATTRS{product}=="Storage Media"
ATTRS{serial}=="5A10101105904"

looking at parent device '/devices/pci0000:00/0000:00:1d.0/usb2/2-1':
KERNELS=="2-1"
SUBSYSTEMS=="usb"
DRIVERS=="usb"
ATTRS{configuration}==""
ATTRS{bNumInterfaces}==" 1"
ATTRS{bConfigurationValue}=="1"
ATTRS{bmAttributes}=="e0"
ATTRS{bMaxPower}==" 0mA"
ATTRS{urbnum}=="126"
ATTRS{idVendor}=="8087"
ATTRS{idProduct}=="0020"
ATTRS{bcdDevice}=="0000"
ATTRS{bDeviceClass}=="09"
ATTRS{bDeviceSubClass}=="00"
ATTRS{bDeviceProtocol}=="01"
ATTRS{bNumConfigurations}=="1"
ATTRS{bMaxPacketSize0}=="64"
ATTRS{speed}=="480"
ATTRS{busnum}=="2"
ATTRS{devnum}=="2"
ATTRS{version}==" 2.00"
ATTRS{maxchild}=="8"
ATTRS{quirks}=="0x0"
ATTRS{authorized}=="1"

looking at parent device '/devices/pci0000:00/0000:00:1d.0/usb2':
KERNELS=="usb2"
SUBSYSTEMS=="usb"
DRIVERS=="usb"
ATTRS{configuration}==""
ATTRS{bNumInterfaces}==" 1"
ATTRS{bConfigurationValue}=="1"
ATTRS{bmAttributes}=="e0"
ATTRS{bMaxPower}==" 0mA"
ATTRS{urbnum}=="25"
ATTRS{idVendor}=="1d6b"
ATTRS{idProduct}=="0002"
ATTRS{bcdDevice}=="0206"
ATTRS{bDeviceClass}=="09"
ATTRS{bDeviceSubClass}=="00"
ATTRS{bDeviceProtocol}=="00"
ATTRS{bNumConfigurations}=="1"
ATTRS{bMaxPacketSize0}=="64"
ATTRS{speed}=="480"
ATTRS{busnum}=="2"
ATTRS{devnum}=="1"
ATTRS{version}==" 2.00"
ATTRS{maxchild}=="2"
ATTRS{quirks}=="0x0"
ATTRS{authorized}=="1"
ATTRS{manufacturer}=="Linux 2.6.32-36-generic ehci_hcd"
ATTRS{product}=="EHCI Host Controller"
ATTRS{serial}=="0000:00:1d.0"
ATTRS{authorized_default}=="1"

looking at parent device '/devices/pci0000:00/0000:00:1d.0':
KERNELS=="0000:00:1d.0"
SUBSYSTEMS=="pci"
DRIVERS=="ehci_hcd"
ATTRS{vendor}=="0x8086"
ATTRS{device}=="0x3b34"
ATTRS{subsystem_vendor}=="0x1043"
ATTRS{subsystem_device}=="0x1c77"
ATTRS{class}=="0x0c0320"
ATTRS{irq}=="23"
ATTRS{local_cpus}=="ff"
ATTRS{local_cpulist}=="0-7"
ATTRS{modalias}=="pci:v00008086d00003B34sv00001043sd00001C77bc0Csc03i20"
ATTRS{broken_parity_status}=="0"
ATTRS{msi_bus}==""
ATTRS{companion}==""

looking at parent device '/devices/pci0000:00':
KERNELS=="pci0000:00"
SUBSYSTEMS==""
DRIVERS==""

Code:
#lsusb
Bus 002 Device 010: ID 054c:0243 Sony Corp. MicroVault Flash Drive
Bus 002 Device 006: ID 12d1:1001 Huawei Technologies Co., Ltd. E620 USB Modem
Bus 002 Device 003: ID 0461:4d0f Primax Electronics, Ltd
Bus 002 Device 002: ID 8087:0020
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 004: ID 0b05:1788 ASUSTek Computer, Inc.
Bus 001 Device 003: ID 13d3:5120 IMC Networks
Bus 001 Device 002: ID 8087:0020
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

Code:
# udevadm info -q all -n /dev/sdc1
P: /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/host14/target14:0:0/14:0:0:0/block/sdc/sdc1
N: sdc1
W: 67
S: block/8:33
S: disk/by-id/usb-Sony_Storage_Media_5A10101105904-0:0-part1
S: disk/by-path/pci-0000:00:1d.0-usb-0:1.4:1.0-scsi-0:0:0:0-part1
S: disk/by-uuid/D9F5-A516
S: disk/by-label/Sony\x208Gb
E: UDEV_LOG=3
E: DEVPATH=/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/host14/target14:0:0/14:0:0:0/block/sdc/sdc1
E: MAJOR=8
E: MINOR=33
E: DEVNAME=/dev/sdc1
E: DEVTYPE=partition
E: SUBSYSTEM=block
E: ID_VENDOR=Sony
E: ID_VENDOR_ENC=Sony\x20\x20\x20\x20
E: ID_VENDOR_ID=054c
E: ID_MODEL=Storage_Media
E: ID_MODEL_ENC=Storage\x20Media\x20\x20\x20
E: ID_MODEL_ID=0243
E: ID_REVISION=0100
E: ID_SERIAL=Sony_Storage_Media_5A10101105904-0:0
E: ID_SERIAL_SHORT=5A10101105904
E: ID_TYPE=disk
E: ID_INSTANCE=0:0
E: ID_BUS=usb
E: ID_USB_INTERFACES=:080650:
E: ID_USB_INTERFACE_NUM=00
E: ID_USB_DRIVER=usb-storage
E: ID_PATH=pci-0000:00:1d.0-usb-0:1.4:1.0-scsi-0:0:0:0
E: ID_PART_TABLE_TYPE=dos
E: ID_FS_LABEL=Sony_8Gb
E: ID_FS_LABEL_ENC=Sony\x208Gb
E: ID_FS_UUID=D9F5-A516
E: ID_FS_UUID_ENC=D9F5-A516
E: ID_FS_VERSION=FAT32
E: ID_FS_TYPE=vfat
E: ID_FS_USAGE=filesystem
E: UDISKS_PRESENTATION_NOPOLICY=0
E: UDISKS_PARTITION=1
E: UDISKS_PARTITION_SCHEME=mbr
E: UDISKS_PARTITION_NUMBER=1
E: UDISKS_PARTITION_TYPE=0x0b
E: UDISKS_PARTITION_SIZE=8011390464
E: UDISKS_PARTITION_SLAVE=/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/host14/target14:0:0/14:0:0:0/block/sdc
E: UDISKS_PARTITION_OFFSET=32256
E: UDISKS_PARTITION_ALIGNMENT_OFFSET=0
E: DEVLINKS=/dev/block/8:33 /dev/disk/by-id/usb-Sony_Storage_Media_5A10101105904-0:0-part1 /dev/disk/by-path/pci-0000:00:1d.0-usb-0:1.4:1.0-scsi-0:0:0:0-part1 /dev/disk/by-uuid/D9F5-A516 /dev/disk/by-label/Sony\x208Gb

MY RULES
Code:
KERNEL=="sd[b-g]", SUBSYSTEMS=="scsi", ATTRS{idVendor}=="054c", ATTRS{idProduct}=="0243", RUN+="/home/magellan/myscripts/udev/my-book-udev.sh"
KERNEL=="sd[b-g]", SUBSYSTEMS=="usb", ATTRS{idVendor}=="054c", ATTRS{idProduct}=="0243", RUN+="/home/magellan/myscripts/udev/my-book-udev.sh"
#SUBSYSTEMS=="usb", ACTION=="add", ATTRS{idVendor}=="054c", ATTRS{idProduct}=="0243", RUN+="/home/magellan/myscripts/udev/my-book-udev.sh"
#SUBSYSTEMS=="block", ACTION=="add", ID_VENDOR=="Sony", ID_MODEL=="Storage_Media" , RUN+="/home/magellan/myscripts/udev/my-book-udev.sh"
#KERNEL=="sd[b-g], SUBSYSTEMS=="usb", ATTRS{

Hope someone has valuable input they can share..

Thanks in advance..
Last edited by pludi; 11-13-2011 at 02:33 PM..
Login or Register to Ask a Question

Previous Thread | Next Thread

8 More Discussions You Might Find Interesting

1. Shell Programming and Scripting

Fixed mount point for a USB cardreader (Raspberry Pi, UDEV)

Hey all! :) I'm trying to create a fixed mount point for an usb cardreader. I've found a script on a raspberry pi forum which does the following: usb stick is plugged in -> script checks the mount point for data -> script starts copying the files automatically -> script unmounts the... (0 Replies)
Discussion started by: Eomer
0 Replies

2. UNIX for Dummies Questions & Answers

Question about udev Rules File?

Hello All, I found this site here: AndDiSa Android Blog: Nexus 7 MTP automount on OpenSuse 11.4 That sites explains how to mount an Android device that can only connect to a computer using MTP or PTP instead of what it used to get treated as, which was a Mass Storage Device. In my Rules... (0 Replies)
Discussion started by: mrm5102
0 Replies

3. Shell Programming and Scripting

udev rules for mounting CDROM

Hi All, I need a simple udev rules in my server Centos 5.4. This rules needs to get trigger my script whenever the cdrom is attached to the server. Could you please provide your suggestion on it. Thanks, Kalai (0 Replies)
Discussion started by: kalpeer
0 Replies

4. UNIX for Advanced & Expert Users

Problems with udev & mounting fat32 usb storage

I have been trying to get USB storage devices to auto-mount themselves under "/media/usb/<dev>" but have been running into some problems with udev (on FC7, btw... running udevd v.106) Every time I put in a FAT (not 32) USB stick, udev identifies it as "USB storage", identifies the partition and... (3 Replies)
Discussion started by: jjinno
3 Replies

5. Solaris

Adding USB Drive to Sparc

I have a sparc machine with which I am trying to add an external USB drive. The server does recognize the USB device, but I cannot see it as an external drive. How to overcome the issue of driver initialization. Much appreciate any help. more /etc/release Solaris 8... (1 Reply)
Discussion started by: Tirmazi
1 Replies

6. Solaris

Adding a new rsync service

Hi, This process has already been covered before in the forum. I have just installed rsync on Solaris 10 and would now like to activate a service. Tornado has previously posted a thread explaining the process. The question I have is: If the following directory does not exist on your system... (10 Replies)
Discussion started by: jamba1
10 Replies

7. Shell Programming and Scripting

Showing off my rsync-to-USB script

Thank you all for helping me figure out how to manage spaces in paths. The following script is the result. The script uses rsync to backup files to a USB device. Special thanks to Scrutinizer:b:. rsync2u is a free menu-driven script. Down load the script from... (7 Replies)
Discussion started by: wolfv
7 Replies

8. UNIX and Linux Applications

Autostart/Autorun Applications

I have developed a CD that runs both Windows and Mac software. I would like it to function as an autorun/autostart; I do not have a problem with the Windows code, but I do for the Mac. I do not feel like investing a couple of hundred $$$ into software, when, I am sure that several lines of UNIX... (2 Replies)
Discussion started by: HornetDr
2 Replies
Login or Register to Ask a Question