configure: vpn pptp

8 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

No encryption using mpd5 PPTP VPN

Hello, So I was finally able to get mpd5 working as a vpn server, however I am not able to use encryption. I have a feeling it's this entry in the logs, can someone decipher what this means for me & tell me if it can be fixed? I know ng_mppc is related to mchap, but I'm not sure what I'm supposed...

2. IP Networking

PPTP VPN with static external IP

I try to setup a VPN Server (pptpd on Debian 5) to route an IP to my home PC when i login to the VPN - this works so far, i get the IP but then it is dead. i cannot connect to anywhere, and only ping my IP - nothing else. Any info on that? I just want to have a static, external IP on the...

3. Debian

Debian with PPTP Server

Dear All My scenario is Debian with PPTP Server in which I am able to connect to through other machines. Ive enable echo 1 > /proc/sys/net/ipv4/ip_forward and through client machine i can browse internet as well I created another pptp client in debian server which connects to another...

4. Emergency UNIX and Linux Support

pptp server - GUI

Hi guys. I am going to build a Linux VPN server(PPTP) for my friend but here is the problem: He don't know Linux and command line to manage users, monitor server, etc anyone knows a good GUI for this problem? I need some solution like nttacplus

5. Emergency UNIX and Linux Support

L2TP over PPTP

Hi there. Here is a crazy question: can we connect to a L2TP vpn server Through a PPTP VPN server(I mean when connecting to a pptp server)?

6. UNIX for Dummies Questions & Answers

SSH logs off and Client pptp goes off as well

Hi , I am a newbie to unix,linux i have a fedora core 4 linux. I had set it up as a pptp vpn client to a windows pptp server. Everything was working fine. Recently i saw that there were many attempts to hack into the root login using ssh. so i changed the ssh port,the ssh portocol to 2. And...

7. UNIX for Advanced & Expert Users

pptp / pf issue

Long story short, I have an issue with getting my VPN to connect to my w2k3 server box when I include the block all rule in my pf.conf: block log all Here's the output: Apr 04 06:04:09.291697 rule 1/0(match): block in on hme0: call 3033 seq 0 gre-ppp-payload (gre encap) Apr 04...

8. UNIX for Dummies Questions & Answers

FreeBSD 4.9 PPTP server

Hey guys, what's up? I'm new to UNIX and I really don't know much. Kinda learning as I go along. I have successfully installed FreeBSD 4.9 and enabled FTP and Telnet services. I'm looking to setup a VPN server on my BSD box but I'm lost. Can anyone guide me in the right way? Much thanks! -...

LEARN ABOUT DEBIAN

gnunet-vpn

GNUNET-VPN(1)						      General Commands Manual						     GNUNET-VPN(1)

NAME

       gnunet-vpn - manually setup a GNUnet VPN tunnel

SYNOPSIS

       gnunet-vpn [options]

DESCRIPTION

       gnunet-vpn  can	be  used  to manually setup a VPN tunnel via the GNUnet network.  There are two main types of tunnels.	Tunnels to an exit
       node which routes the traffic to the global Internet, and tunnels to a node that runs a service only within GNUnet.  Depending on the  type
       of  tunnel, gnunet-vpn takes different options.	The "-i" option is required for tunnels to an exit node, whereas the "-p" and "-s" options
       in conjunction with either "-u" or "-t" are required for tunnels to services.  For exit tunnels, both UDP and TCP  traffic  will  be  redi-
       rected.	For service tunnels, either UDP ("-u") or TCP ("-t") traffic will be redirected.

       The  tool  will	display the IP address for this end of the tunnel.  The address can be displayed as soon as it has been allocated, or only
       after ("-a") the tunnel has been created.

OPTIONS

       -4, --ipv4
	      Desired IP address on this end of the tunnel should be an IPv4 address.

       -6, --ipv6
	      Desired IP address on this end of the tunnel should be an IPv6 address.

       -a, --after-connect
	      Display IP address only after the tunnel is fully connected.

       -c FILENAME,  --config=FILENAME
	      Use the configuration file FILENAME.

       -d SEC, --duration SEC
	      The mapping should be established for SEC seconds.  Default is 5 minutes.

       -h, --help
	      Print short help on options.

       -i IP, --ip IP
	      Tunnel should be to an exit node and connect to the given IPv4 or IPv6 IP address.  Note that you can specify an IPv6 address as the
	      target here, even in combination with "-4" (4to6) and similarly you can specify an IPv4 address in combination with "-6" (6to4).

       -L LOGLEVEL, --loglevel=LOGLEVEL
	      Use LOGLEVEL for logging.  Valid values are DEBUG, INFO, WARNING and ERROR.

       -p PEERID,  --peer=PEERID
	      Name of the peer offering the service to connect to.  Cannot be used in conjunction with "-i", requires "-s".

       -s NAME,  --service=NAME
	      Name of the service running on the target peer.  Cannot be used in conjunction with "-i", requires "-p".

       -t, --tcp
	      Service runs TCP.  Either "-t" or "-u" must be specified when using "-s".

       -u, --udp
	      Service runs UDP.  Either "-t" or "-u" must be specified when using "-s".

       -V, --verbose
	      Be verbose.

       -v, --version
	      Print GNUnet version number.

BUGS

       Report bugs by using Mantis <https://gnunet.org/bugs/> or by sending electronic mail to <gnunet-developers@gnu.org>

SEE ALSO

       gnunet-setup(1)

GNUnet								    25 Feb 2012 						     GNUNET-VPN(1)

Ubuntu