lcd

Config::Model::models::LCDd::MtxOrb(3pm)		User Contributed Perl Documentation		  Config::Model::models::LCDd::MtxOrb(3pm)

NAME

       Config::Model::models::LCDd::MtxOrb - Configuration class LCDd::MtxOrb

VERSION

       version 2.021

DESCRIPTION

       Configuration classes used by Config::Model

       generated from LCDd.conf

Elements
   Device
       Select the output device to use Optional. Type uniline. upstream_default: '/dev/lcd'.

   Size
       Set the display size Optional. Type uniline. upstream_default: '20x4'.

   Type
       Set the display type Optional. Type enum. choice: 'lcd', 'lkd', 'vfd', 'vkd'. upstream_default: 'lcd'.

   Contrast
       Set the initial contrast NOTE: The driver will ignore this if the display
	     is a vfd or vkd as they don't have this feature. Optional. Type uniline. upstream_default: '480'.

   hasAdjustableBacklight
       Some old displays do not have an adjustable backlight but only can switch the backlight on/off. If you experience randomly appearing block
       characters, try setting this to false. Optional. Type enum. choice: 'yes', 'no'. upstream_default: 'yes'.

   Brightness
       Set the initial brightness Optional. Type integer. upstream_default: '1000'.

   OffBrightness
       Set the initial off-brightness This value is used when the display is normally switched off in case LCDd is inactive. Optional. Type
       integer. upstream_default: '0'.

   Speed
       Set the communication speed Optional. Type enum. choice: '1200', '2400', '9600', '19200'. upstream_default: '19200'.

   KeyMap_A
       The following table translates from MtxOrb key letters to logical key names.  By default no keys are mapped, meaning the keypad is not used
       at all.Optional. Type uniline. default: 'Left'.

   KeyMap_B
       Optional. Type uniline. default: 'Right'.

   KeyMap_C
       Optional. Type uniline. default: 'Up'.

   KeyMap_D
       Optional. Type uniline. default: 'Down'.

   KeyMap_E
       Optional. Type uniline. default: 'Enter'.

   KeyMap_F
       Optional. Type uniline. default: 'Escape'.

   keypad_test_mode
       See the [menu] section for an explanation of the key mappings You can find out which key of your display sends which character by setting
       keypad_test_mode to yes and running LCDd. LCDd will output all characters it receives.  Afterwards you can modify the settings above and
       set keypad_set_mode to no again.Optional. Type uniline. default: 'no'.

SEE ALSO

       o   cme

perl v5.14.2							    2012-11-09				  Config::Model::models::LCDd::MtxOrb(3pm)