RHINO(8) NUT Manual RHINO(8)
NAME
rhino - Driver for Brazilian Microsol RHINO UPS equipment
NOTE
This man page only documents the hardware-specific features of the rhino driver. For information about the core driver, see nutupsdrv(8).
SUPPORTED HARDWARE
This driver has been tested with :
o Rhino 6000 VA
o Rhino 7500 VA
o Rhino 10000 VA
o Rhino 20000 VA
All Rhino models are sinusoidal on-line.
EXTRA ARGUMENTS
This driver support the following extra optional settings in ups.conf(5):
battext = n - (default = 0, no extra battery, where n = Ampere*hour )
COMMANDS
o load.on - Turn on the load immediately
o load.off - Turn off the load immediately
o bypass.start - Put the UPS in bypass mode
o bypass.stop - Put the UPS out of bypass mode
o shutdown.stayoff - Shut down in 3 minutes and do not return
AUTHOR
Silvino B. Magalhaes <sbm2yk@gmail.com>
SEE ALSO
The core driver:
nutupsdrv(8)
Internet resources:
The NUT (Network UPS Tools) home page: http://www.networkupstools.org/
Network UPS Tools 05/21/2012 RHINO(8)