Solaris

Hi Group,

I Have just installed quad card in my V440 machine,

I am facing problem I cn just ping its ce0 card only rest of the cards are not ping able,
here is details of my machine.

ifconfig -a
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index
1
inet 127.0.0.1 netmask ff000000
ce0: flags=1000803<UP,BROADCAST,MULTICAST,IPv4> mtu 1500 index 2
inet 10.2.132.72 netmask ffffff80 broadcast 10.2.132.127
ether 0:3:ba:9e:90:ed
ce1: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 3
inet 10.2.132.73 netmask ffffff80 broadcast 10.2.132.127
ether 0:3:ba:a1:fc:e0
ce2: flags=1000803<UP,BROADCAST,MULTICAST,IPv4> mtu 1500 index 4
inet 10.2.132.74 netmask ffffff80 broadcast 10.2.132.127
ether 0:3:ba:a1:fc:e1
ce3: flags=1000803<UP,BROADCAST,MULTICAST,IPv4> mtu 1500 index 5
inet 10.2.132.75 netmask ffffff80 broadcast 10.2.132.127
ether 0:3:ba:a1:fc:e2




bash-3.00# pwd
/etc
bash-3.00# cat hosts
::1 localhost
127.0.0.1 localhost
10.2.132.72 north02
10.2.132.73 north021
10.2.132.74 north022
10.2.132.75 north023
bash-3.00# cat hostname.ce0
north02
bash-3.00# cat hostname.ce1
north021
bash-3.00# cat hostname.ce2
north022
bash-3.00# cat hostname.ce3
north023



can anyone please suggest me where can be the problem

S A M

in ifconfig output the only running interface is ce1. all other interfaces don't have the "running" flag...

Hi Duke
Thanks for quick response actually this server is in installation mode so i working on it by cross cable only

S A M