incredible --> I have tried devfsadm -C -c disk and nothing changed
The output of iostat -En |grep Hard is:
Quote:
> iostat -En |grep Hard
c5t5d0 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
c0t0d0 Soft Errors: 2 Hard Errors: 0 Transport Errors: 0
c1t0d0 Soft Errors: 4 Hard Errors: 0 Transport Errors: 4
c5t5d1 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
c5t6d0 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
c5t6d1 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
c5t7d0 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
c5t7d1 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
c4t7d2 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
c4t4d2 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
c5t4d2 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
c4t5d2 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
c5t5d2 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
c4t6d2 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
c5t6d2 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
c5t7d2 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
c4t5d3 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
c4t4d0 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
c4t4d1 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
c4t5d0 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
c4t5d1 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
c4t6d0 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
c4t6d1 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
c4t7d0 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
c4t7d1 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
c5t4d0 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
c5t4d1 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
c5t7d3 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
c4t4d3 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
c5t4d3 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
c5t6d3 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
c4t6d3 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
c4t7d3 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
c5t5d3 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
c4t4d4 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
c5t4d4 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
c5t5d4 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
c5t6d4 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
c4t5d4 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
c4t6d4 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
c4t7d4 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
c5t7d4 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
c4t4d5 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
c4t5d5 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
c4t6d5 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
c4t7d5 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
c5t4d5 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
c5t5d5 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
c5t6d5 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
c5t7d5 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
And ls /dev/dsk does not have any ddevice of LUN 6 (Which is the LUN that has been assigned to the new disk from the SAN)
The problem with a reconfiguration reboot is that this server is in a production environment and can not be rebooted easily.
Diabolist--> Yes, all other T2000's are connected to the SAN and working without any problems and have been setup with the exact same drivers for the emulex cards. Some of them connect to other SAN's also and have no problems..
Quote:
> cat /etc/path_to_inst |grep emlx
"/pci@7c0/pci@0/pci@8/fibre-channel@0" 0 "emlxs"
"/pci@7c0/pci@0/pci@9/fibre-channel@0" 1 "emlxs"
The output of modinfo:
Quote:
> modinfo |grep eml (Nothing was found)
> modinfo |grep lpf
55 7be00000 82fd8 154 1 lpfc (Emulex FC SCSI/IP lpfc 6.20j)
(the lpfc driver shown here is probably because we install the emulex driver)
During a reconfig reboot (can't do one now), when I have added a new disk, it locates the disk and I think shows messages like "corrupted label on cXtXdX.." for each path of the disk found, (which is correct since it is an new disk and has not been labeled yet).
And yes, we have installed the emulex driver, not only on this server, but on any server where we use emulex cards (about 50 servers) and have never since now had a problem. Altough we have had problems in the past with the Sun emulex driver. (Thats why we decided to use the emulex driver)
Anything else you need, please ask..
Thank you very much for your replies!