Hi,
I am using Aitech sata device sil3132, on powerpc mpc8641. The device is pci express msi compatible. I had enabled msi in device tree for powerpc but still its giving me Cannot translate IRQ index 0 and so on messages.
fsl-msi f7f41600.msi: fsl_msi_setup_hwirq: Cannot translate IRQ index 0... (0 Replies)
All
I am at a loss with a VIO server running ios 2.2.0.10-FP-24 SP-01. The VIO server is fitted with two 8Gb PCI Express Dual Port FC Adapters. However when I run the lsnports command only two of the adapter ports show as capable:
$ lsnports
name physloc ... (4 Replies)
Hello,
I am trying to install Nmap on my Solaris machine. I got errors at the very last of "make" command though. Could someone point me out what I am lacking?
Thank you!
Nmap version: 5.50 (nmap-5.50.tar.bz2)
Solaris version (cat /etc/release):
Error message ( run "./configure &&... (0 Replies)
Im trying to check if a series of directory exists and if not create them, and am having issues. All the instances of test return with the error "test:
#!/bin/bash
location_Parent=~/Documents/sight_of_sound
location_IMG=~/Documents/Sight_of_sound/IMG
location_AUD=~/Documents/Sight_of_sound/AUD... (4 Replies)
Hi PHP 5 can't seem to find cc compiler even though it's there
(note, i'm installing in a zone,& am root)
Any Ideas ?
$ pwd
/tmp/php-5.2.6
$ ./configure
loading cache ./config.cache
checking for Cygwin environment... no
checking for mingw32 environment... no
checking for egrep... egrep... (4 Replies)
I'm floundering here trying to locate a PCI-E 1x HBA that will support an external tape drive in SCO Openserver 6. I was unable to find anything that would work in the compatible hardware list and a call to Adaptec confirmed that PCI-X would've been a better option for the risers in the Dell 2950... (1 Reply)
I just installed Oracle10g Express on Linux FC6.
I get errors in Java and SQLPlus when trying to connect to the database, or start it.
In SQLPlus as "sysdba" when I type "startup" I get this error...
ORA-27100: shared memory realm already exists
And in Java or SQLPlus when I try to... (0 Replies)
syslog.conf(4) Kernel Interfaces Manual syslog.conf(4)NAME
syslog.conf - syslogd configuration file
SYNOPSIS
facility.severity destination Where: Is part of the system generating the message, specified in /usr/include/sys/syslog_pri.h.
See also the syslogd(8) reference page. The severity level, which can be emerg, alert, crit, err, warning, notice, info, or debug. See
/usr/include/sys/syslog_pri.h.
The syslogd daemon logs all messages of the specified severity level plus all messages of greater severity. For example, if you
specify level err, all messages of levels err, crit, alert, and emerg or panic are logged. A local file pathname to a log file, a
host name for remote logging or a list of users. In the latter case the users will receive messages when they are logged in. An
asterisk (*) causes a message to be sent to all users who are currently logged in.
DESCRIPTION
The /etc/syslog.conf file is a system file that enables you to configure or filter events that are to be logged by syslogd. You can specify
more than one facility and its severity level by separating them with semicolons.
You can specify more than one facility logs to the same file by separating the facilities with commas, as shown in the EXAMPLES section.
The syslogd daemon ignores blank lines and lines that begin with an octothorpe (#). You can specify # as the first character in a line to
include comments in the file or to disable an entry. The facility and severity level are separated from the destination by one or more tab
characters.
If you want the syslogd daemon to use a configuration file other than the default, you must specify the file name with the following com-
mand: # syslogd -f config_file
Daily Log Files
You can specify in the /etc/syslog.conf file that the syslogd daemon create daily log files. To create daily log files, use the following
syntax to specify the path name of the message destination: /var/adm/syslog.dated/ { file} The file variable specifies the name of the log
file, for example, mail.log or kern.log. If you specify a /var/adm/syslog.dated/file path name destination, each day the syslogd daemon
creates a sub-directory under the /var/adm/syslog.dated directory and a log file in the sub-directory, using the following syntax:
/var/adm/syslog.dated/ date / file Where: The date variable specifies the day, month, and time that the log file was created. The file
variable specifies the name of the log file you previously specified in the /etc/syslog.conf file. The syslogd daemon automatically cre-
ates a new date directory every 24 hours and also when you boot the system. The current directory is a link to the latest date directory.
To get the latest logs, you only need to reference the /var/adm/syslog.dated/current directory.
EXAMPLES
The following is a sample /etc/syslog.conf file: # # syslogd config file # # facilities: kern user mail daemon auth syslog lpr binary #
priorities: emerg alert crit err warning notice info debug # kern.debug /var/adm/syslog.dated/kern.log user.debug /var/adm/sys-
log.dated/user.log daemon.debug /var/adm/syslog.dated/daemon.log auth.crit;syslog.debug /var/adm/syslog.dated/syslog.log mail,lpr.debug
/var/adm/syslog.dated/misc.log msgbuf.err /var/adm/crash.dated/msgbuf.savecore kern.debug /var/adm/messages kern.debug /dev/console *.emerg
*
FILES
/etc/syslog.conf
/etc/syslog.auth - Authorization file for remote logging.
/usr/include/sys/syslog_pri.h - Common components of a syslog event log record.
RELATED INFORMATION
Commands: /usr/sbin/syslogd(8), /usr/sbin/binlogd(8)
System Administration delim off
syslog.conf(4)