9 More Discussions You Might Find Interesting
1. Linux
Hi
I need to identify a newly attached LUN from NetApp on a linuxserver running uname -o
GNU/Linux
I have first run the df -h and got the following:
df -h
Filesystem Size Used Avail Use% Mounted on
/dev/mapper/vg_outsystemdb-lv_root
50G 2.7G 45G ... (3 Replies)
Discussion started by: fretagi
3 Replies
2. Solaris
Hi
I have NetApp lun, that was mounted on server as a file system that failed, and that server is no longer in use, but I would like to use that file system on another server. The NetApp Admin, told me he can present that lun to my other system, but my problem is how to mount it? Because that... (8 Replies)
Discussion started by: fretagi
8 Replies
3. Solaris
So,
We have a Netapp storage solution. We have Sparc T4-4s running with LDOMS and client zones in the LDOMS, We are using FC for storage comms. So here's the basic setup
FC luns are exported to the primary on the Sparc box. using LDM they are then exported to the LDOM using vdisk. at the... (4 Replies)
Discussion started by: os2mac
4 Replies
4. AIX
Hi,
I have aix 6.1 box. I want to configure iscsi luns from netapp storage. I tried in google but not getting proper solution for that. i m not getting the proper iqn name.
Please share me the steps to complete this requirements.
Thanks in advance. (1 Reply)
Discussion started by: sunnybee
1 Replies
5. UNIX for Advanced & Expert Users
I have seen a few threads / posts on the forum's but nothing specific to what Iam after. So Iam hoping you can help.
Issue : Iam hoping to remove unused emc luns from my solaris servers , T2000 (5.10 Generic_142900-02). I have a list of the process I have followed for the removal of the luns.... (3 Replies)
Discussion started by: furby
3 Replies
6. Solaris
Hi all
We have a couple of solaris zones running a jboss app in a cluster. Each zone has a shared netapp volume mounted to /app/xxx with everything under that subdir apart from jboss which is local to each zone in /app/jboss-3.2.5
There is a symlink in /app/xxx/jboss-3.2.5 which points to... (0 Replies)
Discussion started by: skewbie
0 Replies
7. Solaris
Hi,
I'm connecting a Solaris 10 server to a Netapp filer with two single port Emulex (Sun StorageTek PCI-X Enterprise 4GB FC HBA) HBAs. After physically installing both these HBAs what do I ned to do within Solaris 10 to enable them and configure them with persistent bindings.
Do I need... (6 Replies)
Discussion started by: gwhelan
6 Replies
8. Solaris
Hi,
I need to increase a veritas filesystem I have currently mounted on a Solaris 10 server. We can resize the LUN on the NetApp filer no problem. What I need to know is what do I do next on the Solaris 10 server I have so that it will see the increase in size. Do I run 'devfsadm' to... (3 Replies)
Discussion started by: gwhelan
3 Replies
9. Solaris
I have this problem when i integrate a new san switch in DFM 3.01 R1 :
dfm fcswitch add switchname1
Error: Host switchname2 (11197) already exists.
switchname2 is a similar san switch but in another fabric, switchname2 is already integrated in DFM database.
Bests Regards
Olivier (2 Replies)
Discussion started by: omainfroy
2 Replies
reboot(8) System Manager's Manual reboot(8)
NAME
reboot - Restarts the machine
SYNOPSIS
/usr/sbin/reboot [-dlnq]
DESCRIPTION
When the system is running and multiple users are logged in, use the shutdown -r command to perform a reboot operation. If no users are
logged in, use the reboot command.
The reboot command normally stops all running processes, syncs the disks, logs the reboot, and writes a shutdown entry in the login
accounting file, /var/adm/wtmp.
The reboot command uses the sync call to synchronize the disks, and to perform other shutdown activities such as resynchronizing the hard-
ware time-of-day clock. After these activities, the system reboots. By default, the system starts and the file systems are automatically
checked. If the start-up activities are successful, the system comes up in the default run-level.
You must have root privileges to use this command. Using the -n flag can result in file system damage.
FLAGS
Generates a crash dump of the system before halting it. Can be used with any of the other flags. Does not log the reboot using syslog
Does not sync the disks or log the reboot using syslog Performs a quick reboot without first shutting down running processes; does not log
the reboot using syslog
EXAMPLES
To enable the default reboot action, enter: reboot This command causes the system to stop all running processes, sync the disks, log the
shutdown, and perform other routine shutdown and reboot activities. To shut down the system without logging the reboot, enter: reboot -l
This command shuts down the system and performs all shutdown and reboot activities, except logging the shutdown. To reboot the system
abruptly, enter: reboot -q This command reboots the system abruptly without shutting down running processes.
FILES
Specifies the command path Specifies the login accounting file Specifies the path of the syslog daemon
RELATED INFORMATION
Commands: fsck(8), halt(8), init(8), savecore(8) shutdown(8), syslogd(8)
Functions: reboot(2), sync(2), syslog(3) delim off
reboot(8)