9 More Discussions You Might Find Interesting
1. Linux
Hi
I need to identify a newly attached LUN from NetApp on a linuxserver running uname -o
GNU/Linux
I have first run the df -h and got the following:
df -h
Filesystem Size Used Avail Use% Mounted on
/dev/mapper/vg_outsystemdb-lv_root
50G 2.7G 45G ... (3 Replies)
Discussion started by: fretagi
3 Replies
2. Solaris
Hi
I have NetApp lun, that was mounted on server as a file system that failed, and that server is no longer in use, but I would like to use that file system on another server. The NetApp Admin, told me he can present that lun to my other system, but my problem is how to mount it? Because that... (8 Replies)
Discussion started by: fretagi
8 Replies
3. Solaris
So,
We have a Netapp storage solution. We have Sparc T4-4s running with LDOMS and client zones in the LDOMS, We are using FC for storage comms. So here's the basic setup
FC luns are exported to the primary on the Sparc box. using LDM they are then exported to the LDOM using vdisk. at the... (4 Replies)
Discussion started by: os2mac
4 Replies
4. AIX
Hi,
I have aix 6.1 box. I want to configure iscsi luns from netapp storage. I tried in google but not getting proper solution for that. i m not getting the proper iqn name.
Please share me the steps to complete this requirements.
Thanks in advance. (1 Reply)
Discussion started by: sunnybee
1 Replies
5. UNIX for Advanced & Expert Users
I have seen a few threads / posts on the forum's but nothing specific to what Iam after. So Iam hoping you can help.
Issue : Iam hoping to remove unused emc luns from my solaris servers , T2000 (5.10 Generic_142900-02). I have a list of the process I have followed for the removal of the luns.... (3 Replies)
Discussion started by: furby
3 Replies
6. Solaris
Hi all
We have a couple of solaris zones running a jboss app in a cluster. Each zone has a shared netapp volume mounted to /app/xxx with everything under that subdir apart from jboss which is local to each zone in /app/jboss-3.2.5
There is a symlink in /app/xxx/jboss-3.2.5 which points to... (0 Replies)
Discussion started by: skewbie
0 Replies
7. Solaris
Hi,
I'm connecting a Solaris 10 server to a Netapp filer with two single port Emulex (Sun StorageTek PCI-X Enterprise 4GB FC HBA) HBAs. After physically installing both these HBAs what do I ned to do within Solaris 10 to enable them and configure them with persistent bindings.
Do I need... (6 Replies)
Discussion started by: gwhelan
6 Replies
8. Solaris
Hi,
I need to increase a veritas filesystem I have currently mounted on a Solaris 10 server. We can resize the LUN on the NetApp filer no problem. What I need to know is what do I do next on the Solaris 10 server I have so that it will see the increase in size. Do I run 'devfsadm' to... (3 Replies)
Discussion started by: gwhelan
3 Replies
9. Solaris
I have this problem when i integrate a new san switch in DFM 3.01 R1 :
dfm fcswitch add switchname1
Error: Host switchname2 (11197) already exists.
switchname2 is a similar san switch but in another fabric, switchname2 is already integrated in DFM database.
Bests Regards
Olivier (2 Replies)
Discussion started by: omainfroy
2 Replies
reboot(2) System Calls Manual reboot(2)
NAME
reboot - Reboots system or halts processor
SYNOPSIS
#include <sys/reboot.h>
void reboot( int howto );
PARAMETERS
Specifies a mask of options.
DESCRIPTION
The reboot() function restarts the system. The startup is automatic and brings up /vmunix in the normal, nonmaintenance mode. The calling
process must have superuser privilege to run this function successfully. However, a reboot is invoked automatically in the event of unre-
coverable system failures.
The following options, defined in the sys/reboot.h include file are passed to the new kernel or the new bootstrap and init programs. They
are supplied as values to the howto parameter. The default, causing the system to reboot in its usual fashion. Dump kernel memory before
rebooting; see the savecore command for more information. The processor is simply halted; no reboot takes place. The disks are not sync'd
before the processor is halted or rebooted. Normally, the disks are sync'd (see the sync() command) before the processor is halted or
rebooted. Because the disks are not sync'd with the RB_NOSYNC option, loss of data may result from using it.
When no options are given (that is, RB_AUTOBOOT is used), the system is rebooted from file vmunix in the root file system of unit 0 (zero)
of a disk chosen in a processor-specific way. (see the fsck command).
RETURN VALUES
If successful, this call does not return. Otherwise, a -1 is returned and errno is set to indicate the error.
ERRORS
If the reboot() function fails, errno may be set to the following value: The calling process does not have appropriate privilege.
RELATED INFORMATION
Commands: crashdc(8),
halt(8), init(8), reboot(8), savecore(8) delim off
reboot(2)