sun 8 unable to communicate through console

9 More Discussions You Might Find Interesting

1. Solaris

Unable to start webconsole:console

Here is issue... bash-3.00# svcs system/webconsole:console STATE STIME FMRI maintenance 1:15:54 svc:/system/webconsole:console bash-3.00# svcadm clear svc:/system/webconsole:console bash-3.00# svcs -a |grep /system/webconsole offline* 1:20:44...

2. Solaris

Unable to take console

When trying to connect to console, I am getting the below error. plathwsvcd: Another instance is running. plathwsvcd: Another instance is running. plathwsvcd: Another instance is running. plathwsvcd: Another instance is running. INIT: Id "plhw" respawning too fast: disabled for 5 minutes ...

3. AIX

P550 Unable to access Console

I have recently aquired the following machine: IBM,9113-550 Up until yesterday we could connect a dumb terminal to serial port 1 and get console login. However the dumb terminal died. We are now using a laptop with a null modem cable attached to serial port 1. This works perfectly for all of...

4. Solaris

Sun Fire V890 - Unable to access RSC or Serial console

Hello Folks, I am having trouble to login to rsc or serial console of V890. The rsc2.2.3 has been configured with required parameters, resetrs and even rebooted. When serial port is connected to laptop, The hyper terminal does not get the console or POSt messages when the server is rebooting...

5. Solaris

unable to load console info in SUNMC 4.0

Hi all, unable to load console info in SUNMC 4.0 in alarm it is giving error info i.e..Agent on host (.....),1161 port not responding. Iam using M9000 server solaris 10 plz try to solve the problem Regards spandhan

6. Infrastructure Monitoring

unable to load console info in SUNMC 4.0

hi all, unable to load console info in SUNMC 4.0 in alarm it is giving error info i.e..Agent on host (.....),1161 port not responding. plz try to solve the problem Regards spandhan

7. Red Hat

unable to communicate with Linux machine

Hi all, I installed red hat 2.6.9-5 and when I am trying to ping it.I am able to ping any other machine in the network but unable to do vice-versa(means unable to ping this machine from any other machine) and getting the message -- please provide your valuable suggestions ...

8. HP-UX

Unable to login at console and telnet

Hi friend, I'm facing a problem to access the console and telnet to the HP ux 11 server due to the system file is full. How to access this server via single mode and how to mount the folder / and folder /var? thanks. vestro

9. Solaris

Hooking up to Console's on sun's

it there any docs out there anyhwre that have the specs for cabing to a sun console. I have an e420 here, i cant seem to get a console connection, i have triewd the silver serial connectors that come with the new dsun servers, but no luck with those.

LEARN ABOUT CENTOS

pppoe-connect

PPPOE-CONNECT(8)					      System Manager's Manual						  PPPOE-CONNECT(8)

NAME

       pppoe-connect - Shell script to manage a PPPoE link

SYNOPSIS

       pppoe-connect [config_file]

       pppoe-connect interface user [config_file]

DESCRIPTION

       pppoe-connect  is  a  shell  script  which  manages a PPPoE connection using the Roaring Penguin user-space PPPoE client.  If you omit con-
       fig_file, the default file /etc/sysconfig/network-scripts/ifcfg-ppp0 is used.  If you supply interface and user,  then  they  override  the
       Ethernet interface and user-name settings in the configuration file.

       Note that normally, you should not invoke pppoe-connect directly.  Instead, use pppoe-start to bring up the PPPoE connection.

       pppoe-connect  first  reads a configuration file.  It then brings up a PPPoE connection.  If the connection ever drops, a message is logged
       to syslog, and pppoe-connect re-establishes the connection.  In addition, each time the connection is dropped  or  cannot  be  established,
       pppoe-connect executes the script /etc/ppp/pppoe-lost if it exists and is executable.

       The shell script pppoe-stop causes pppoe-connect to break out of its loop, bring the connection down, and exit.

TECHNICAL DETAILS

       pppoe-connect uses the following shell variables from the configuration file:

       ETH    The Ethernet interface connected to the DSL modem (for example, eth0).

       USER   The PPPoE user-id (for example, b1xxnxnx@sympatico.ca).

       PIDFILE
	      A file in which to write the process-ID of the pppoe-connect process (for example, /var/run/pppoe.pid).  Two additional files ($PID-
	      FILE.pppd and $PIDFILE.pppoe) hold the process-ID's of the pppd and pppoe processes, respectively.

       By using different configuration files with different PIDFILE settings, you can manage multiple PPPoE connections.  Just specify  the  con-
       figuration file as an argument to pppoe-start and pppoe-stop.

AUTHOR

       pppoe-connect was written by David F. Skoll <dfs@roaringpenguin.com>.

       The pppoe home page is http://www.roaringpenguin.com/pppoe/.

SEE ALSO

       pppoe(8),  pppoe-start(8),  pppoe-stop(8), pppd(8), pppoe.conf(5), pppoe-setup(8), pppoe-status(8), pppoe-sniff(8), pppoe-server(8), pppoe-
       relay(8)

4th Berkeley Distribution					 21 February 2000						  PPPOE-CONNECT(8)

Solaris